Miiego AL3 User Manual
Miiego – AL3 Wireless Headphones
ENGLISH User Manual
QUICK-GUIDE
1-2-3 – go!:
1: Make sure the headset is charged and turned OFF.
2: Press and hold the big MFB Button on the headset (right ear pad) for
about 7 seconds until the red and blue LED flash alternatively
(pairing mode)
3: Activate Bluetooth on your mobile phone or device, and “seek for
new device”. Find”AL3” on the list and press ”connect”.
If asked for a PIN-code press: 0000
Thank you for buying the AL3 Wireless Headphones from Miiego.
This unit uses Bluetooth wireless technology.
Listen to and enjoy music wirelessly!
Hands-free communication
Useful rechargeable battery function
About AL3 Wireless Headphones from Miiego
AL3 is a stereo Bluetooth headset. It supports the following Bluetooth profiles:
A2DP —— Advanced Audio Distribution Profile
AVRCP —— Audio/Video Remote Control Profile
HSP —— Headset Profile
HFP —— Hands free Profile
Bluetooth wireless technology
Bluetooth is a standard of close range radio-communication technology. Through
Bluetooth technology, you can achieve the highest transmission rate among mobile
phones, computer, printer, PDA and other devices.
The max. transmission range of Bluetooth Class II is 10 meters.
This headset can e.g. be connected to a Bluetooth enabled mobile phone, PDA, PC, tablet
etc....
Steps for the Bluetooth functions:
1. Overview
Right Earpad:
1) Multifunction button (MFB):Switch on/off
the headset, answer, end and reject call,
mute, voice dial and voice transfer, redial
last number, pause and revert to play
2) Head band
3) – key: volume down
4) < key : previous song
5) +key: volume up
6) LED Indicator
7) > tast : next song
8) Built-in microphone
9) Charging port
2. Charging the headset
The first time you use the headset we advise you to fully charge the battery in order
to ensure the best performance of the battery. The battery is a re-chargeable
Lithium-Polymer battery.
Next time charging
When you hear a warning tone of “beep” every 30 seconds, at the same time, the
red light blinks. It means the battery is low on power and needs to be charged.
Charging the battery with USB cable
Step1: Insert USB charging cable into USB port of PC.
Step2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
Step3: It takes about 2-3 hours to charge the headset fully.
Warning: 1. The battery is recycled.
2. Do not dispose battery in fire, as it may cause explosion.
How to use
1. Switching the headset on / off
Function
Operation
LED indicator
Switch on
Press the MFB
for 3-4 seconds,
and release till
the blue light
blinks.
The blue light
blinks quickly
every 4 sec.
Switch off
Press the MFB
for 3-4 seconds,
and release till
the red light
blinks.
The red light
blinks quickly
every 4 sec.
2. Pairing with Bluetooth device
1) How to enter into pairing mode
Function
Operation
LED indicator
Enter into pairing
mode
Make sure the headset
is off. Press and hold
the MFB for 7
seconds, and release
when the red and blue
light blink alternately
The red and
blue lights
blink
alternately.
Note: The pairing mode will last 2 minutes, If the headset still can’t pair with any Bluetooth
devices after 2 minutes, it will switch into standby mode automatically.
Loading...