Miia MT-733G ACTIIVE Instruction Manual

ENG

Instruction manual

TAB

733G

actiive

7”

MIIA MT-733G

1

1 Read Me

1.1 Acknowledgement

Thanks for your purchase

MT-733G

of Miia. Its CPU is MTK8312 Dual core, which apply the
Cortex-A9, dominant frequency is 1.3GHz, it is based on Android 4.2 operation system, and easy to
expand the third application procedure.
The product is designed with various functions, including WCDMA, WIFI, BT, GPS, FM,
voice call and so on. It is easy to achieve wireless communication and internet, you have access to
surf the internet anytime and anywhere; it is also built with high accuracy GPS module, so that it
can be used for navigating through installing map software. There are many sensors which offer
you brand-new operation and entertainment; besides, it has camera shooting, which leads
electronic consumption to enter into a fresh palm internet entertainment time.
The manual systemically introduces the functions, use techniques and announcements, please
read this manual carefully before your operation.

1.2 Announcements

Preventive main attention

· Please always keep the TABLET dry. To avoid the device short trouble, corrosion fault
and electric short, please prevent the device, battery and charger from water and
moisture, and don’t operate the device or charger by wet hand.

· To avoid failure of device, battery and charger, please prevent the device, battery,
charger from violent shock or shake.

· To avoid failure of device, battery and charger, please prevent the device, battery,
charger of all over heating or too cold circumstance

· Never shock, throw, prod the TABLET, or drop, extrude, bend the TABLET.

· Never disassemble the device and accessories arbitrarily, otherwise the device and
accessories are not in our company warranty scope.

2

2 Introduction

2.1 Operation and Preparation

Battery Charging

If this navigator is rst used, please use AV adapter to fully charge it.

1. Apply the power adapter to charge for TABLET.
Status and Reminder
Reminder icons
When some remind message appears in your reminder window, please click column and slip
the screen to open the reminder list. Choose the menu you need, and conrm the information.
Then you can close the reminder window through clicking the column to slide up. Please refer to
below status icons:

New email Airplane Mode on

USB connected USB debugging connected

Return button Downloading

Setting button & Display Home button
recently-used application

Current electric volume. WIFI connected, internet is available

Reminder board

Reminder icons will work while receiving emails, WIFI is open, you can open the reminder
board to view the detailed information.

Open the reminder board

When the reminder column shows new reminder icon, please hold the column and slip down
your nger, then the reminder board is opened.

3

3 Quick Start Guide

3.1 Keys Function

Keys Function Description

Power button Short press to sleep/wake up,
long press to startup and shutdown.

Volume +(up) increase the volume

Volume - (down) decrease the volume

HOME button (home) click it in any interface will return to main interface.

Back button (back) click it in any interface will return to previous menu

Menu button This button will display in menu interface.

Setting button Can set the system and other menus
& display recently browsed history

3.2 Startup and Shutdown

Startup

Long press POWER key for three seconds, you can enter into startup picture. The system enters
into screen lock status, please unlock it.

Shutdown

1. Long press POWER, it will popup shutdown window.

2. Shutdown window contains mute mode, airplane mode,reboot mode and shutdown four options.

3. Click Shutdown is the last step.

4

3.3 Open and Close of the Screen

Screen will be closed on its own when no operation happens.

1. Screen will be closed on its own if no operation happens for some time to save battery power

2. When screen is open, press POWER key, the screen will be closed immediately.

Open the screen when it is closed.

If the screen is closed, short press POWER to open the screen. The screen will be locked
open it, it will show the picture as below picture, left slide to unlock and enter into camera, right
slide the unlock icon to unlock the screen.

Picture 3.1

3.4 Usage of Touch Screen

TABLET operating methods

There are below methods to view the main screen, menu and application procedure in your TABLET.

Click

When you want to use the screen keyboard typing or choose application in the main interface, you
only need to touch it by your nger.

Press on

If you want to open some item (textbox or the link in the webpage), or shortcut and main procedure
move, you can press on this item.

Quickly slide or slide

Quickly slide or slide indicates make quick vertical or horizontally movement by nger.

Pull

Before you pull, you need to hold the it with strength until you pull it into the position you want.

Rotate

For most pictures, you only need to rotate the TABLET sidewise to change the screen direction
from horizontally to vertical. For instance, when you are typing words, and watching movies.

5

3.5 Home Page

Main interface as below picture 3.2, long press the blank and it will popup windows to set
wallpaper, folder, widgets, and shortcut.

Picture 3.2

The extended home page

The home page can be extended beyond the wideness of screen to provide more space, which you
can put new-added shortcuts and widgets. Click the blank space in home page
then slide right or left to extend to the right or left of the screen. In the home page, there are
two extended pictures, as Picture 3.3.

Picture 3.3

Search

Battery volume

Time

Set the system and other
menus.
& display recently
browsed history

Home

Return

6

The shortcut icons management in desktop application.
Create folder icon in desktop

1. Drag the icons need to be put together on one icon (can also overlay several icons) as Picture 3.4.

2. Then click the overlayed icons, the applications can be folded, as Picture 3.5.
Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be
renamed (this is similar with Apple IOS system), the icons position can be changed through long press.

Picture 3.4

Picture 3.5

Remove the icons in desktop

1. Long press the icons need to be remove, then on the right above of the screen, it will appear
icons.

2. Drag the icon to the above of the remove icon, till the icon become red, then move your nger to
delete the icon.

Change the wallpaper of desktop

1. In home page, long press any blank space in main screen, it will popup a window to change the wallpaper.

2. Click the gallery or wallpaper gallery to select the wallpaper.

7

3.6 Visit Application Procedures

Click in right top of Picture 3.2, enter into main interface as Picture 3.6, choose the application
procedure you want to visit.

Picture 3.6

3.7 USB Connection

TABLET storage configuration

Before transmitting documents, you have to conduct storage conguration for your TABLET:

1. Connect the TABLET and computer by USB cable, the reminder column will show the remind
information.

2. Open the reminder board; please view the TABLET status and reminder to learn how to open the board.

3. In the reminder board, click the “USB Connected”, it will as below Picture 3.4, then click “open
USB storage conguration”.

4. Now the USB is connected successfully.

Picture 3.7

Copy the document into memory card

1. Connect the TABLET to computer with USB cable.

2. As TABLET storage conguration, it is connected with computer successfully.

3. Open the “My computer” in your computer, check the items in “removable disc”.

Return to home page

8

4. Copy the documents you need into “removable disc”.

5. After copying nishes, click “shutdown the USB storage conguration” to uninstall.

Notice: When the TABLET is connected with USB cable, and you open the USB storage
conguration, you can’t view the memory card through the TABLET. Only after you detach
the USB cable, you can view the memory card in the TABLET.

3.8 Operation Technique

Enter widgets interface

In the application interface, click widgets on the above of screen, or slide the screen, it will sw itch
into widgets interface. Long press any widget to create its shortcut, then you can enter into the
application through the shortcut icon.

Create application shortcut icons in the desktop

In the application interface or widgets interface, long press any icon to switch into desktop
automatically, drag and hold the icon, you can move to any position in the desktop.
Remind: If the target position has no space, the widget won’t be add in the main screen.

9

4 Basic Settings

4.1 SIM Management

4.1-1 Voice call

Click settings in main menu, choose SIM Management, as Picture 4.1

Picture 4.1

Click voice call, choose defaulted SIM card, as Picture 4.2

Picture 4.2

4.1-2 Video Call

Click settings in main menu, choose SIM Management, and click video call, choose defaulted
SIM card when makes video call, as Picture 4.3

Picture 4.3

10

4.1-3 Message

Click settings in main menu, choose SIM Management, click message, choose the defaulted SIM
card when sends message, as Picture 4.4

Picture 4.4

4.1-4 Data Connection

Click setting application in main menu, choose SIM management, click data connection, choose
the defaulted SIM card, as Picture 4.5

Picture 4.5

11

4.2 Wireless and Internet

1. Connect Wi-Fi

1) In the main menu or interface, choose setting application procedure.

2) Click WLAN, open wi, TABLET will automatically search the available Wi wireless internet.
As Picture 4.6

3) Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password
window, enter password, click connect.

Picture 4.6

2. Add Network

1) Click icon in right top, as Picture 4.7

Picture 4.7

2) Input network SSID, the wireless network name, click save.

3) Click user name already saved, click connect to use network, as Picture 4.8

Picture 4.8

12

3. Network Notice

If you open Network Notice, when WIFI signal appears, the right bottom will
remind you available WLAN network, as Picture 4.6

4. Keep WI-FI on during sleep..

1. Click icon in right top of Picture 4.8, select advanced.

2. Click Keep WI-FI on during sleep, as Picture 4.9

Picture 4.9

4.3 Bluetooth

Bluetooth function operation

1. Click setting application in main menu interface

2. Click bluetooth and open it.

3. If somebody open bluetooth in your surroudings, click search device in right above,
then TABLET will automatically search the bluetooth device nearby. As picture 4.10

Picture 4.10

4. Click the available Bluetooth device, it will popup request window, enter into related password,
and match the device to connect.

5. After match successfully, choose the operation you want to, click to enter into Picture 4.11.

13

Picture 4.11

Bluetooth setting

1. Rename tablet
Click icon in right top of Picture 4.10, as Picture 4.12, select rename tablet, you can rename it
as you want

Picture 4.12

2. Check visibility timeout
Select visibility timeout setting in Picture 4.12, choose the time you want to set, as Picture 4.13
(Note: check overtime setting is the time setting when Bluetooth is checked)

Picture 4.13

3. Display the le you received
Choose display the le you received in Picture 4.12, you can view download and upload les.

14

4. Bluetooth advanced setting
Choose Bluetooth advanced setting in Picture 4.12, enter into Picture 4.14

Picture 4.14

5. File transmission
Open le transmission service, Connect Bluetooth FTP and customer device to visit and operate
the le.

6. Bluetooth distance induction device
Open Bluetooth distance induction device, when two Bluetooth devices distance is quite far or
connection is cut off, the Bluetooth will remind you with sound.

4.4 More

4.4-1 Airplane Mode

Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned
on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module
will recover to previous state.

4.4-2 VPN

Open VPN, click add VPN network, as Picture 4.15. Input name and server address, then save.

Picture 4.15

15

Click VPN, as Picture 4.16, input VPN user name and password, click connect.

Picture 4.16

4.4-3 Network sharing and portable hot spots

Portable WI-FI hot spots

1. Click setting application in main menu.

2. Click more when wi is well connected, open network share and portable hot spot

Picture 4.17

Picture 4.18

3. Click keep WI-FI hot spots on, choose open time.

4. Return to previous menu, open portable WLAN hot spots, click congure WI-FI hot spots

16

Picture 4.19

5. Set passwords you want to, password should be more than 8 numbers.

4.5 Mobile Networks

1. 3G Service

Click 3G service, as Picture 4.20, choose available defaulted SIM card, GSM is 2G network,
WCDMA is 3G network.

Picture 4.20

Access Point Name( APN)
Click mobile network, as Picture 4.21

Picture 4.21

17

Choose access points name (APN), choose SIM card you need to connect,
Choose connect type, as Picture 4.22

Picture 4.22

Network Operator
Click network operator, choose SIM card you need to connect, system will search available GSM
and WCDMA network, as Picture 4.23

Picture 4.23

4.5.1 GPRS data prior mode

After Open GPRS data prior mode, systems will priority chooses your network.

18

4.6 Storage

Open setting function, click memory, click preferred install location, you can choose install new
application to choose preferred install location.
System storage: it is the space TABLET leave for system le, as Picture 4.27. it can’t be viewed.

Picture 4.27

Internal storage: it is internal storage is TABLET local NAND storage, as Picture 4.28, if you need to
check the storage content, you can check it in main menu.

Picture 4.28

SD card: You can check storage space, SD card available space, unmount SD card and erase SD
card, as Picture 4.29

Picture 4.29

19

Safe remove SD card

1. Click setting application.

2. Click memory.

3. Click uninstall SD card.

4. Now you can remove SD card safely

Note: Removing SD card safely can protect SD card and increase its lifetime.

4.7 Location service

Click setting, select location service, as Picture 4.30

Picture 4.30

1. Google’s location service
Open Google location service, you can use WIFI to positioning device.

2. GPS satellites
Open GPS satellite, you can use GPS to positioning device.

3. GPS Assistance
Open GPS Assistance, it can increase the speed of GPS positioning, but you need to
insert SIM card and use data transmission.

4. EPO setting
Click EPO setting, enter into Picture 4.31, then check if EPO positioning information
and EPO has turned on auto download.

Picture 4.31

20

5. A-GPS
After opening A-GPS, you can increase positioning speed through network.

6. A-GPS settings
Click A-GPS setting, enter into Picture 4.32

Picture 4.32

1. Disable after reboot
Click disable after reboot, when you reboot your TABLET, A-GPS will auto turn off.

2. Network Request
Click network request, TABLET can get your location through network.

3. Network used
Open network used, you can choose network type, as Picture 4.33

Picture 4.33

4. Server
Click server, it can switch location service, as Picture 4.34

Picture 4.34

21

5. Location and Google search
Open location and allow google search, you can use your location information to improve search
result and other services.

4.8 Backup and Reset

Connect WIFI and login your google account, choose backup my data, system will backup your
data into google server.
If you need to recovery factory reset, please click reset, as Picture 4.35, if you need to formulate
NAND, please click reset tablet.

Picture 4.35

22

5 Media

5.1 Music

Enter into music player: in menu or desktop click music icon to enter into music player,
click the music you want to play, as Picture 5.1:

Picture 5.1

Picture 5.2

· Drag the progress bar to adjust play progress.

· Operation of music player button as Picture 5.2

5.2 Camera

In the main interface or desktop, click camera application procedure , enter into camera, as Picture 5.3

Picture 5.3

Album

Song name

Artist

Random play

Next songPrevious song

Pause / Play

23

5.3 FM Radio

Click in the main interface or desktop to enter into FM radio interface. Radio button operation
instruction as Picture 5.4:

Picture 5.4

Click search to search FM band, as Picture 5.5

Picture 5.5

RDS setting: click Menu key in interface, click the munu button, and choose RDS settings, enter
into RDS setting as Picture 5.6, and choose the selection you want to add

Picture 5.6

Save channels: Click button in the main interface to save the channel, and the channel will be
saved in channels list.
Note: You need to insert earphone as antenna when using FM radio, If no antenna, your TABLET
can’t search any frequency band.

Current
frequency

Save button

Next channel

Play / Pause

Previous channel

24

6 Communication Function

6.1 Phone

Picture 6.1

Call history

Contact

Display phone numbers

Hide keypad

The area of
dial phone numbers

Dial phone numbers

Function key

25

7 Internet

7.1 Browser

In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and
internet setting), click IE browser in the main menu or desktop to enter the IE interface, as
Picture 7.1

Picture 7.1

Address column

Save bookmark

menu

26

8 GPS Function

8.1 GPS Navigation

Map of the third parties is required for TABLET internal GPS satellite signal receiver positioning,
after installation the device can accurately implement trafc real-time navigation, meet the needs of
outdoor navigation.

Enter into setting interface, click icon, enter into below picture 8.1

Picture 8.1

When positioning successfully the screen will display the latitude, longitude, and the time of your
location. As Picture 8.2

Picture 8.2

The value indicates the signal strength, the positioning time is relavant to time zone in your setting,
if the time is not inconsistent with real time in your location, please check the time zone in your
setting is correct or not.

Picture 8.3

Return

Value

Signal

27

9 Other Application Procedures

9.1 Clock

Click Clock procedure, enter into below interface as Picture 9.1

Picture 9.1

9.2 File Manager

File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will
share the les, install apk etc.
In the main menu or desktop, click the document manager icon to enter into documents manager.

Picture 9.2

A) Copy, cut, delete, rename the les and folder: choose the le or folder, long pressthe le or
folder to enter into the interface as Picture 9.3 you can operate the le or folder.

Picture 9.3

B) Paste the copy or cut le: choose the le you want to paste, choose right top icon to enter
into Picture 9.4, choose right top icon to enter into Picture 9.5

Set alarm

RAM

External SD card

28

Picture 9.4

Picture 9.5

C) Share le: choose any le, long press it, it will popup “share”, choose the share way you want
in the list

Picture 9.6

D) Install apk le: Choose the le sufxed .apk in the le manager, you can install the third part
software as reminder.
E) Build new folder: Choose the menu you want to build the le, click icon in right top,
choose new folder, you can build new folder as reminder.

29

10. MIIA GAMES

Enter a world of fun with the

Miia Games

App and discover always new games!

How it works:

• By clicking on the

Miia Games

icon you will nd 3 games available for you right away!

• Choose the game you like the most and start playing: you don’t need to download any other

Apps and you will be able to play without heaping your device memory.

• To unlock all other games click on the “key” icon at the top right or on the games

with a yellow lock
There is plenty of them and always new!

• By clicking on the “key” button or on locked games, you can choose the payment method

you like and, at payment received, you will get an unlock PIN to access all games, with no other
payment needed¬.

• Then insert your PIN, together with your email or your telephone number, and start playing!

Remember: to use the application you will have to be connected to the Internet and your code
will be valid in the

Miia Games

App of all Miia devices.

Have fun with

Miia

&

GamePix!

11. PLAY STORE

The Play Store has many applications that you can quickly and easily download to your Tablet

1. Tap the Play Store application icon.
The rst time, you are prompted for your Play Store login information. If you have not yet
registered an account, tap Register. Otherwise, tap Login and enter your login information and
then tap login again.

2. You can select applications from the default Featured group, by Categories, Top (latest,
hottest, random), or search by name.

3. Tap on an application, __> Download.

4. After the app is downloaded, tap Install.

5. Tap Open to launch now, or Done to return to the Play Store screen.
After downloading apps, tap on History to manage the installed applications. You can add and/
or view comments from other users, launch apps, and uninstall them.

30

12 Installation of Procedures

12.1 Installation

Install the third party application procedure

1. Click “le manager” application procedure; choose the application procedure you need to
install.

2. Hold the application procedure you need to install.

3. It popup install, click install apk.

4. Finish the installation as guide, it will operate.
Note: The third party procedure searched from internet to use on the system are all sufxed with
.apk.

12.2 Uninstall

Uninstall application procedure

1. Click setting icon in main interface.

2. Click manage application procedure, list all the application procedures
installed in the system.

3. Click the APK you want to uninstall, click uninstall.

4. Click conrm to nish uninstallation.

13 Troubles Shooting

1. The rst startup of TABLET is slow
After the TABLET system upgraded, the rst startup need to install the pre-installed application
softwares, the lead time is around 2-3 minutes, the startup afterwards will be much quicker.

2. TABLET can’t connect Wi-Fi

· Make sure the wireless router of internet service can work in normal.

· Ensure the TABLET and wireless router in certain distance, and no wall or other barrier between
them.

· Ensure the user name and password both correct.

3. TABLET feels hot
When many application procedures are used in meanwhile, or the brightness of screen open to
the lightest or under charging, TABLET may feel fever. It is normal.

4. Email can’t be set or Registration of application procedure.

· Ensure your internet is well connected.

· Make sure your email setting way is correct.

· Keep your system time and local time consistent.

31

5. The system is abnormal and can’t work.
When you install some third party application procedure, it may cause abnormal work, you can
press Reset key(next to power port) to reset the system.

6. The webpage can’t be opened

· Please keep the distance between from route to TABLET in effective range.

· Please restart WIFI and try again.

7. TABLET works terribly slow sometimes
It is normal phenomenon. Please turn off some application you don’t need in advanced task
management, or uninstall some third party application to release more system resource

SPECIFICATIONS

Dimension: 188*109*9 mm
Processor: MTK 8312 Dual core Cortex A9,1.3 GHZ
Internal Memory: 512M
RAM: 4GB
TF card: UP to 32G
Display: 7 inch capacitive touch screen
Resolution: 1024*600 LCD
Battery: 3000MAH
In Standby time: about 80hours
Play Video time: 3 hours
USB: micro USB 2.0
Dual Camera: 0.3MP front; 2MP rear
G-sensor 3D
GPS
3G
Integrated Microphone
Wifi 802.11 b/g/n
Operating System: Android 4.2 Jelly Bean
Video Play Format: AVI, MPG, MKV, RM, RMVB, MP4, MOV, VOB, DAT, FLV,

TS, 3GP, WEBM, VP8, etc...
Audio Play Format: MP1, MP2, MP3, WMA, WAV, OGG, OGA, APE,
FLAC, AAC, M4A, 3GPP, etc…

Image Format: JPG, JPEG, BMB, GIF, PNG, JFIF etc;
Network application: Google Play Store™ .WWW browser, Google search, market, MSN,

Email POP3/SMTP/IMAP4, flash 11.1
MiiaGame (Powered by GamePix).

Produced, imported and distributed by:
Futura Graca spa
via Domenico Fontana 12
00185 Roma - Italy

MADE IN PRC

Your product contains batteries covered by the European Directive
2006/66/EC, which can not be disposed of with normal household waste.
Please inform yourself about the local rules on separate collection of batteries
because correct disposal helps to prevent negative consequences for the
environment and human health.

Correct Disposal of This Product (Waste Electrical and electronic equipment - WEEE - European WEEE Directive 2002/96/EC)
(Applicable in the European Union and other European countries with separate collection systems).
This marking on the product, accessories or literature indicates that the product and its accessories technical (such as the charger,
headset, USB cable) should not be disposed with other household wastes at the end of its life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, the user is encouraged to separate the
product and these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources. For more information about treatment, recovery and recycling of this product, please contact the territorial unit responsible
for the disposal service or the shop where you purchased the product.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Certication information SAR (Specic Absorption Rate, specic absorption rate)
The device conforms to European Union (EU) standards that limit human exposure to radio frequency (RF) energy emitted by radio and
telecommunications equipment. These standards prevent the sale of mobile devices that exceed a maximum exposure level (known as
SAR) of 0.8 W / kg.
During testing, the maximum SAR recorded for this model was equal to 000 W / kg. During normal use, the actual SAR level can be
much lower, as the device has been designed to emit only the RF energy necessary to transmit a signal to the base station piùvicina.
By automatically emitting lower levels when possible, your device reduces your overall exposure to RF energy.