MII 67060-101, 67060-001 Datasheet
67060 SLOTTED OPTICAL INTERRUPTER
PROTON AND TOTAL DOSE TOLERANT
OPTOELECTRONIC PRODUCTS
Mii
DIVISION
Rev - 11/4/02
Features:
• Non-contact switching
• 0.130” wide slot
• 0.300” lead spacing
Applications:
• Position sensing
• Open sensing
• Rotation sensing
DESCRIPTION
The 67060 consists of GaAlAs light emitting diode and an NPN silicon phototransistor in hermetic coaxial packages, mounted
in a plastic housing on opposite sides of a 0.125” wide slot. Phototransistor switching takes place whenever an opaque object
passes through the slot. The components are available screened in accordance with MIL-PRF-19500. Available with single
or dual mounting flange(s).
ABSOLUTE MAXIMUM RATINGS
Continuous Forward Current ..............................................................................................................................................100 mA
Reverse Voltage ........................................................................................................................................................................3 V
LED Power Dissipation ..................................................................................................................................................100 mW 1/
Continuous Forward LED Current .........................................................................................................................................40mA
Collector – Emitter Voltage ......................................................................................................................................................30 V
Emitter – Collector Voltage ........................................................................................................................................................5 V
Power Dissipation ..........................................................................................................................................................100 mW 1/
Storage Temperature.......................................................................................................................................... -55°C to + 100°C
Operating Temperature ...................................................................................................................................... -55°C to + 100°C
Lead Soldering Temperature (1/16 inch from case – 5 seconds)........................................................................................ 240°C
Notes:
(1) Derate linearly @ 1.33 mW/°C for TA > 25°C.
Package Dimensions Schematic Diagram
0.484 [0.48]
0.484 [0.48]
0.177 [0.18]
0.425 [0.43]
0.300 [0.30]
NOTE: ALL LINEAR DIMENSIONS ARE IN INCHES (MILLIMETERS)
_
+
ES
K
A
0.250 [0.25]
0.130 [0.13]
OPTICAL
CENTER
E
C
LINE
0.125 [0.13]
A
0.348 [0.35]
K
0.100 [0.10]
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
9 - 4
C
E
67060 SLOTTED OPTICAL INTERRUPTER
Rev - 11/4/02
OPTICAL/ELECTRICAL CHARACTERISTICS
At 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Input Diode Forward Voltage V
Input Diode Reverse Current I
OUTPUT PHOTOTRANSISTOR
At 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Collector – Emitter Breakdown Voltage V
Emitter – Collector Breakdown Voltage V
Collector – Emitter Dark Current I
(BR)CEO
(BR)ECO
COUPLED CHARACTERISTICS
At 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Collector – Emitter Saturation Voltage V
Collector Current I
PART # PART DESCRIPTION
67060-001 Commercial
67060-101 Screened
CE(SAT)
C(ON)
F
R
CEO
4 mA V
SELECTION GUIDE
2.0 V IF = 10mA
100 µA VR = 3V
30 V IC = 1 mA
5 V IE = 100µA
100 nA V
0.40 V IC = 2 mA, IF = 20mA
CE
CE
= 5V, I
= 10V
= 20mA
F
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
9 - 5
Loading...