MII 66164-101, 66164-011, 66164-001 Datasheet

66164 SINGLE CHANNEL LINEAR OPTOCOUPLER

Electrically Similar to 3C92C

OPTOELECTRONIC PRODUCTS

Mii

DIVISION

REVISION A

8/30/00

Features:

• High Reliability

• Base lead eliminated for improved noise immunity

• Rugged package

• Stability over wide temperature

• +500V electrical isolation

Applications:

• Eliminate ground loops

• Level shifting

• Line receiver

• Switching power supplies

• Motor control

DESCRIPTION

The 66164 contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler
is built on a TO-46 header. The collector of the phototransistor is electrically connected to the case. This optocoupler is
capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver
should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise
immunity.

ABSOLUTE MAXIMUM RATINGS

Input to Output Voltage.......................................................................................................................................................500V

Emitter-Collector Voltage........................................................................................................................................................ 5V

Collector-Emitter Voltage (value applies to emitter-base open-circuited & the input-diode equal to zero) ........................ 60V

Reverse Input Voltage ........................................................................................................................................................... 7V

Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ................................. 50mA

Peak Forward Input Current (value applies for tw

< 1µs, PRR < 300 pps) .....................................................................500mA

Continuous Collector Current ............................................................................................................................................ 50mA

Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ..............................300mW

Storage Temperature........................................................................................................................................-65°C to +150°C

Operating Free-Air Temperature Range .......................................................................................................... -55°C to +100°C

Lead Solder Temperature (10 seconds max.) ................................................................................................................ 240°C

Notes:

1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C.

2. Derate linearly to 125°C free-air temperature at the rate of 3 mW/

°C.

Package Dimensions Schematic Diagram

0.230Ø (5.84)

0.209Ø (5.31)

0.195Ø (4.95)

0.178Ø (4.52)

4 LEADS

0.019Ø (0.48)

0.016Ø (0.41)

0.030 (0.76) MAX

0.210 [5.34]

0.170 [4.32]

DIMENSIONS ARE IN INCHES (MILLIMETERS)

0.50 [12.70] MIN

EMITTER

CATHODE

COLLECTOR

Ø0.100[2.54]

3

2

1

0.046 [1.17]

0.036 [0.91]

ANODE

4

0.048 [1.22]

0.028 [0.71]

45°

NOTE: ANODE ELECTRICALLY CONNECTED TO CASE

66164 SINGLE CHANNEL OPTOCOUPLER (Electrically similar to 3C92C)

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM

3 - 46

ELECTRICAL CHARACTERISTICS

TA = 25°C unless otherwise specified.

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS

Input Diode Static Reverse Current

Input Diode Static Forward Voltage

Input Diode Static Forward Voltage

Reverse Breakdown Voltage

Input Diode Capacitance

OUTPUT TRANSISTOR

TA = 25°C unless otherwise specified.

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS

Collector-Emitter Breakdown Voltage V

Emitter-Collector Breakdown Voltage V

Collector-Emitter Dark Current I

COUPLED CHARACTERISTICS

TA = 25°C unless otherwise specified.

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS

On State Collector Current

On State Collector Current

On State Collector Current -55°C

Collector-Emitter Saturation Voltage

Isolation Resistance

Input to Output Capacitance

Delay Time

Storage Time

Rise Time t

Fall Time t

RECOMMENDED OPERATING CONDITIONS:

PARAMETER SYMBOL MIN MAX UNITS

Input Current, Low Level I

Input Current, High Level I

Supply Voltage V

Operating Temperature TA -55 125 °C

PART NUMBER PART DESCRIPTION

66164-011
66164-101
66164-001

Single Channel optocoupler, military operating range (-55
Single Channel optocoupler, full mil-temp (-55
Single Channel optocoupler, commercial (0° to 70°C)

I

R

V

F

V

F

BVR 7 12 V I

C

IN

(BR)CEO

(BR)ECO

CEO1

I

CEO2

I

C(ON)

I

C(ON)

I

C(ON)

V

CE(SAT)

R

ISO

CIO 2 2.5 pF f = 1MHz

td 2 4 µs VCE = 5V, IF = 2mA, RL = 100Ω

ts 0.2 0.5 µs VCE = 5V, IF = 2mA, RL = 100Ω

r

f

1 µA V

1.15 1.2 V IF = 2mA

1.3 1.5 V IF = 50mA

25 pF V = 0V, f = 1MHz

50 V IC = 1mA, I

7

50

V IC =10µA, I

10

nA

nA

VCE = 50V, IF = 0mA

V

CE

= 5V, I

4 mA V

CE

= 5V, I

4 10 mA VCE = 0.4V, IF = 10mA

4 mA VCE = 5V, IF = 10mA

0.4 V IF = 50mA, IC = 10mA

109 Ω V

3 5 µs

VCE = 5V, IF = 2mA, RL = 100Ω

IN-OUT

4 5 µs

VCE = 5V, IF = 2mA, RL = 100Ω

FL

FH

CE

0 1 µA

2 10 mA

5 50 V

= 3V

R

= 100µA

R

= 0, IF = 0

B

= 10µA, IF = 0

E

= 0mA

F

= 10mA

F

= 500V

SELECTION GUIDE

° to +125°C) with 100% device screening (JTX)

° to +125°C)

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM

3 - 47