MII 66163-107, 66163-101, 66163-017, 66163-011, 66163-001 Datasheet
SINGLE CHANNEL OPTOCOUPLERS
66163
DIRECT REPLACEMENT FOR 3C91C
REVISION C
12/29/00
Features:
• High Reliability
Base lead eliminated for improved noise immunity
•
Rugged package
•
Stability over wide temperature
•
+500V electrical isolation
•
Applications:
Eliminate ground loops
•
Level shifting
•
Line receiver
•
Switching power supplies
•
Motor control
•
DESCRIPTION
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
The
contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler is
66163
built on a TO-46 header. The collector of the phototransistor is electrically connected to the case. This optocoupler is
capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver
should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise
immunity.
ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage...........................................................................................................................................................500V
Emitter-Collector Voltage............................................................................................................................................................5V
Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................60V
Reverse Input Voltage ...............................................................................................................................................................7V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) .....................................50mA
Peak Forward Input Current (Value applies for tw
, PRR < 300 pps) .......................................................................500mA
< 1µs
Continuous Collector Current ................................................................................................................................................50mA
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .................................230mW
Storage Temperature.......................................................................................................................................... -65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C
Lead Solder Temperature (10 seconds max.) ....................................................................................................................260°C
Notes:
1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C.
2. Derate linearly to 125°C free-air temperature at the rate of 2.3 mW/°C.
Package Dimensions Schematic Diagram
4 LEADS
0.019Ø (0.48)
0.016Ø (0.41)
0.230Ø (5.84)
0.209Ø (5.31)
0.195Ø (4.95)
0.178Ø (4.52)
0.030 (0.76) MAX
0.210 [5.34]
0.170 [4.32]
DIMENSIONS ARE IN INCHES (MILLI METERS)
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
0.50 [12.70] MIN
www.micropac.com
EMITTER
COLLECTOR
CATHODE
2
E-MAIL:
Ø0.100[2.54]
3
1
0.046 [1.17]
0.036 [0.91]
ANODE
4
0.048 [1.22]
45°
0.028 [0.71]
optosales@micropac.com
NOTE: ANODE ELECTRI CALLY CONNECTED TO CASE
3 - 44
66163
REVISION C 12/29/00
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Input Diode Static Reverse Current I
SINGLE CHANNEL OPTOCOUPLER
R
1µA V
(Direct Replacement for 3C91C)
= 3V
R
Input Diode Static Forward Voltage V
Input Diode Static Forward Voltage V
Reverse Breakdown Voltage B
Input Diode Capacitance C
OUTPUT TRANSISTOR
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Collector-Emitter Breakdown Voltage V
Emitter-Collector Breakdown Voltage V
Collector-Emitter Dark Current I
(BR)CEO
(BR)ECO
CEO1
I
CEO2
COUPLED CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
On State Collector Current
On State Collector Current
On State Collector Current -55°C
On State Collector Current -X07
-107
Collector-Emitter Saturation Voltage
Isolation Resistance
Input to Output Capacitance
Delay Time
Storage Time
Rise Time
Fall Time
I
C(ON)
I
C(ON)
I
C(ON)
I
C(ON)
V
CE(SAT)
R
F
F
VR
IN
1.15 1.2 V IF = 2mA
1.3 1.5 V I
712 V I
= 50mA
F
= 100µA
R
25 pF V = 0V, f = 1MHz
50 V IC = 1mA, IB = 0, IF = 0
7VI
60
10
nA
nA
4mA
320mA
2mA
20 mA
0.4 V
9
ISO
C
IO
t
d
t
s
t
r
t
f
10
2 2.5 pF f = 1MHz
24
0.2 0.5
35
45
Ω
µ
s
µ
s
µ
s
µ
s
= 0mA, I
C
= 10µA, IF = 0
E
VCE = 50V, IF = 0mA
V
= 5V, I
CE
= 0mA
F
VCE = 5V, IF = 10mA
VCE = 0.4V, IF = 10mA
VCE = 5V, IF = 10mA
VCE = 5V, IF = 10mA
IF = 50mA, IC = 10mA
V
= 500V
IN-OUT
VCE = 5V, IF = 2mA, RL = 100
VCE = 5V, IF = 2mA, RL = 100
VCE = 5V, IF = 2mA, RL = 100
VCE = 5V, IF = 2mA, RL = 100
Ω
Ω
Ω
Ω
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Input Current, Low Level I
Input Current, High Level I
Supply Voltage V
Operating Temperature T
FL
FH
CE
A
01µA
210 mA
550 V
-55 125
°
C
SELECTION GUIDE
PART NUMBER PART DESCRIPTION
66163-001 Single Channel optocoupler, commercial (0° to 70°C)
66163-011 Single Channel optocoupler full military operating temperature range
66163-101 Single Channel optocoupler tested over full military temperature range with 100% device screening
66163-017 Single Channel optocoupler full military operating temperature range w/200% CTR
66163-107 Single Channel optocoupler tested over full military temperature range with 100% device screening w/200% CTR
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL:
optosales@micropac.com
3 - 45
Loading...