MII 66116-203B, 66116-203, 66116-202B, 66116-202, 66116-201B Datasheet

66116

Coaxial or Bulkhead Mount packages

Single Channel Optocoupler

Electrically Similar to 4N47-4N49

Mii

OPTOELECTRONIC PRODUCTS

DIVISION

Features:

Applications:

• High reliability

• Base lead provided for conventional transistor

biasing

• Very high gain, high voltage transistor

• Line Receivers

• Switchmode Power Supplies

• Signal ground isolation

• Process Control input/output isolation

• Hermetically sealed for reliability and stability

• Stability over wide temperature range

• High voltage electrical isolation

DESCRIPTION

Very high gain optocoupler utilizing GaAIAs infrared LED optically coupled to an N-P-N silicon phototransistor packaged in a
hermetically sealed metal case. These devices can be tested to customer specifications, as well as to MIL-PRF-38534 H&K
quality levels.

*ABSOLUTE MAXIMUM RATINGS

Input to Output Voltage........................................................................................................................................................

±

1kV

Collector-Base Voltage ........................................................................................................................................................... 45V

Collector-Emitter Voltage (See Note 1) .................................................................................................................................. 40V

Emitter-Base Voltage................................................................................................................................................................ 7V

Input Diode Reverse Voltage.................................................................................................................................................... 2V

Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 2) .................................... 40mA

Continuous Collector Current ..............................................................................................................................................50mA

Peak Diode Current (See Note 3).............................................................................................................................................1A

Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 4) ................................300mW

Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C

Storage Temperature..........................................................................................................................................-65°C to +125°C

Lead Temperature (1/16” (1.6mm) from case for 10 seconds).......................................................................................... 240°C

* JEDEC registered data

Package Dimensions Schematic Diagram

Base

Collector

Emitter

Case Lead

Case Lead

ANODE

CATHODE

A

K

Notes:

1. This value applies with the emitter-base diode open-circuited and the input-diode current equal to zero.

2. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C.

3. This value applies for t

1us. PRR<300 pps.

≤

w

4. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C.

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com

E-MAIL: [e-mail]

3 - 12

C

E

B

66116

Single Channel Optocoupler

ELECTRICAL CHARACTERISTICS

TA = 25°C Unless otherwise specified

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE

Input Diode Static Reverse Current I

Input Diode Static Forward Voltage -55°C
+25°C
+100°C

OUTPUT TRANSISTOR

TA = 25°C Unless otherwise specified

R

1

V

F

0.8

1.4

0.7

100 µA VR = 2V

1.7

1.5

VI

= 10mA

E

1.3

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE

Collector-Base Breakdown Voltage V

Collector-Emitter Breakdown Voltage V

Emitter-Collector Breakdown Voltage V

COUPLED CHARACTERISTICS

TA = 25°C Unless otherwise specified

(BR)CBO

(BR)CEO

(BR)ECO

45 V IC = 100µA, I

40 V IC = 1mA, I

7VI

= 0, IE = 100µA, IF = 0

C

= 0, IF = 0

B

= 0, IF = 0

B

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE

On State Collector Current -XX1

-XX2

I

C(ON)

-XX3

On State Collector Current

-55°C I

C(ON)

On State Collector Current -XX1
+100°C -XX2

I

C(ON)

-XX3

Off State Collector Current +25°CI

Off State Collector Current +100°C I

Collector-Emitter Saturation Voltage -XX1

-XX2

-XX3

Input to Output Resistance R

Input to Output Capacitance C

Rise Time/ Fall Time -XX1
Phototransistor Operation -XX2

-XX3

Rise Time/ Fall Time -XX1
Photodiode Operation -XX2

-XX3

C(OFF)

C(OFF)

V

CE(SAT)

V

CE(SAT)

V

CE(SAT)

t

r

t

r

t

r

tr / t
tr / t
tr / t

I-O

I-O

/ t
/ t
/ t

f

f

f

f

f

f

NOTES:

1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.

2. This parameter measured using pulse techniques t

0.5
1
2

0.7

1.4

2.8

0.5
1
2

11

10

=100µs, duty cycle < 1%.

w

mA

5

VCE = 5V, I

10

mA

VCE = 5V, I

mA

VCE = 5V, I

100 nA VCE = 20V, I

100

0.3

0.3

0.3

µ

AV

V
V
V

= 20V, I

CE

IC = 0.5mA, I

IC = 1mA, I
IC = 2mA, I

V

IN-OUT

5 pF f = 1MHz, V

20
25
25

0.85

0.85

0.85

µ

s

µ

s

µ

s

µ

s

µ

s

µ

s

VCC = 10V, IF = 5mA, RL = 100

VCC = 10V, IF = 5mA, RL = 100

= 0, IF = 1mA

B

= 0, IF = 2mA

B

= 0, IF = 2mA 2

B

= 0, IF = 0mA

B

= 0, IF = 0mA

B

= 0, IF = 2mA

B

= 0, IF = 2mA

B

= 0, IF = 2mA

B

= 1kV 1

= 1kV 1

IN-OUT

Ω

Ω

RECOMMENDED OPERATING CONDITIONS:

PARAMETER SYMBOL MIN MAX UNITS

Input Current, Low Level I

Input Current, High Level I

Supply Voltage V

FL

FH

CE

0100µA

210mA

510 V

SELECTION GUIDE

PART NUMBER PART DESCRIPTION

66116-001 Single Channel, Commercial (0 to 70ºC) Coaxial Packaging
66116-002 Single Channel, Commercial (0 to 70ºC) Coaxial Packaging
66116-003 Single Channel, Commercial (0 to 70ºC) Coaxial Packaging
66116-001B Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging
66116-002B Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging
66116-003B Single Channel, Commercial (0 to 70ºC) Bulkhead Packaging
66116-101 Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging
66116-102 Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging
66116-103 Single Channel, 100% screened, (-55 to +125ºC) Coaxial Packaging
66116-101B Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging
66116-102B Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging
66116-103B Single Channel, 100% screened, (-55 to +125ºC) Bulkhead Packaging
66116-201 Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging
66116-202 Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging
66116-203 Single Channel, full mil-temp, (-55 to +125ºC) Coaxial Packaging
66116-201B Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging
66116-202B Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging
66116-203B Single Channel, full mil-temp, (-55 to +125ºC) Bulkhead Packaging

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com

E-MAIL: [e-mail]

3 - 13