MII 66013-003, 66013-002, 66013-001, 66013-000 Datasheet
DUAL CHANNEL, HERMETICALLY SEALED, HIGH-SPEED
66013
6N134 OPTOCOUPLER
Features:
DSCC Approved 8102801EX
•
5 MHz bandwidth typical
•
1500 Vdc isolation test voltage
•
TTL compatible input and output
•
High radiation immunity
•
Faraday shield to provide high common mode
•
rejection
DESCRIPTION
Applications:
Military and space
•
High reliability systems
•
Voltage level shifting
•
Isolated receiver input
•
Communication systems
•
Medical systems
•
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
The
dual channel optocoupler consists of two LED’s optically coupled to two high speed, high gain inverting detector
66013
gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns
typical. The 66013 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534
screened versions or tested to customer specifications.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature..........................................................................................................................................-65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C
Lead Solder Temperature (For 10s, 1/16” [1.6mm] from package)................................................................................... 260°C
Peak Forward Input Current (each channel) .............................................................................................. 40mA (1ms duration)
Average Forward Input Current (each channel)................................................................................................................. 20mA
Input Power Dissipation (each channel)............................................................................................................................ 35mW
Reverse Input Voltage (each channel) .................................................................................................................................... 5V
Supply Voltage.........................................................................................................................................7V(1 minute maximum)
Output Current - I
(each channel) ......................................................................................................................................25mA
O
Output Power Dissipation (each channel) .........................................................................................................................40mW
Output Voltage - V
(each channel).........................................................................................................................................7V
O
Total Power Dissipation (both channels)..........................................................................................................................350mW
Package Dimensions Schematic Diagram
.800±.020 [20.32]
Vcc
Vo1
Vo2
15
14
12
PIN 1
0.120 [3.05]
0.290 [7.37]
A
2
K
1
A
6
0.175 [4.45]
0.100 [2.54]
ALL DIMENSION S ARE IN INCHES [MILLIM ETERS]
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
0.018 [0.46]
www.micropac.com
0.301 [7.65]
5
0.011 [0.28]
E-MAIL: optosales@micropac.com
K
3 - 22
GND
10
66013
DUAL CHANNEL, HERMETICALLY SEALED, HIGH SPEED 6N134 OPTOCOUPLER
ELECTRICAL CHARACTERISTICS
Ta=-55°C TO AT 125°C UNLESS OTHERWISE SPECIFIED.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
High Level Output Current I
Low Level Output Voltage V
High Level Supply Current (Both Channels)
Low Level Supply Current (Both Channels)
Input Forward Voltage
Input Reverse Breakdown Voltage
Input-Output Insulation Leakage Current
Propagation Delay Time To High Output Level t
Propagation Delay Time To Low Output Level t
Delay Time To Low to High Output Level (90%) t
Delay Time To High to Low Output Level (90%) t
TYPICAL CHARACTERISTICS
TA = 25°C, VCC = 5V EACH CHANNEL
I
CCH
I
CCL
BV
I
I—O
PLH
PHL
OH
V
LH
HL
OL
F
R
5V
5250µAV
= 5.5V, VO = 5.5V,
CC
0.35 0.6 V VCC = 5.5V IF = 10mA
IOL(Sinking) = 10mA
18 28 mA
26 36 mA
VCC = 5.5V, IF = 0
VCC = 5.5V, IF = 20mA
1.5 1.75 V
1.0 µA V
I—0
Relative Humidity = 45%
ta = 25°C, t = 5s
45 100 ns R
= 510Ω, CL = 50pF
L
I
= 13mA,
f
55 100 ns RL = 510Ω, CL = 50pF
If = 13mA, Ta = 25°C
90 ns RL = 510Ω, CL = 50pF
IF = 13mA,
40 ns RL = 510Ω, CL = 50pF
I
= 13mA,
f
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
Input Capacitance
Input Diode Temperature Coefficient
Resistance (Input-Output)
Capacitance (Input-Output)
Input-Input Insulation Leakage Current
Resistance (Input-Input)
Capacitance (Input-Input)
Output Rise-Fall Time (10-90%)
Common Mode Transient Immunity at High
∆
C
v
R
C
R
C
t
CM
IN
T
∆
F
A
I-0
I-O
I
I-I
I-I
I-I
t
,
f
f
H
1000 10000 V/µsV
Output Level
Common Mode Transient Immunity at Low
CM
L
1000 10000 V/µsV
Output Level
NOTES:
1. Each channel
2. Measured between pins 1 through 8 shorted together and pins 9 through 16 shorted together.
3. Measured between pins 9 and 10 or 11 and 12 shorted together, and pins 9 through 16 shorted together.
4. Measured between pins 9 and 10 shorted together, and pins 11 and 12 shorted together.
5. The t
6. The t
7. CMh is the max. tolerable common mode transient to assure that the output will remain in a high logic state (i.e. Vo >2.0V).
propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse.
plh
propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse.
phl
8. CMl is the max. tolerable common mode transient to assure that the output will remain in a low logic state (i.e. Vo < 0.8V).
9. It is essential that a bypass capacitor (.01 to 0.1µF ceramic) be connected from pin 10 to pin 15.
60 pF
-1.9
12
10
mV/°C
Ω
VF = 0, f = MHz
V
1.7 pF f = 1MHz 3
0.5 nA Relative Humidity = 45%
V
I-I
10
12
Ω
0.80 pF f = 1MHz 4
35 90 ns
RL = 510Ω, CL = 50pF
CM
V
RL = 510Ω, IF = OmA
CM
V
O
R
= 510Ω, I
L
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Input Current, Low Level Each Channel I
Input Current, High Level Each Channel I
Supply Voltage V
FL
FH
C
0250µA
12.5 20 mA
4.5 5.5 V
SELECTION GUIDE
PART NUMBER PART DESCRIPTION
66013-000 Dual Channel Optocoupler with 100% device screening
66013-001 DSCC Dwg 8102801EX Dual Channel Optocoupler
66013-002
66013-003
Dual Channel Optocoupler, Commercial, tested over full military temperature range (-55°C to +125°C)
Dual Channel Optocoupler, Commercial (0° to 70°C)
IF = 250µA
IF = 20mA
IR = 10µA
= 1500Vdc,
= 25°C
Ta
= 25°C
Ta
= 25°C
T
a
IF = 20mA
= 500V
I—O
= 500V, t = 5s
V
= 500V
I-I
IF = 13mA
= 10V (peak),
(min) = 2V,
O
= 10V (peak),
(max) = 0.8V,
= 10mA
F
1
1,9
1
2
5
6
1
1
3
4
4
7
8
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
3 - 23
Loading...