16kV HIGH VOLTAGE ISOLATOR WITH PHOTOTRANSISTOR
66005
or PHOTODARLINGTON OUTPUT, CERAMIC PACKAGE
Features:
Applications:
• High Reliability
• Rugged package
• Stability over wide temperature
+16kV electrical isolation
•
Grid current modulator
•
Power Supply Feedback
•
Switching between power supplies
•
Patient station isolation
•
DESCRIPTION
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
In the
66005,
high voltage isolation is provided with a GaAlAs light emitting diode and by your choice of outputs, either
silicon phototransistor or photodarlington, hermetically sealed in TO-46 packages and mounted in a high reliability,
hermetically sealed, ceramic package. Available in commercial (0
and full Military temperature range (-55
to +125°C).
°
Contact the factory for special custom or multi-channel
to +70°C), extended temperature range (-40° to +85°C)
°
requirements!
ABSOLUTE MAXIMUM RATINGS
Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ...................... 35V
Emitter-Collector Voltage...................................................................................................................................................... 7V
Continuous Collector Current .......................................................................................................................................... 50mA
Continuous Transistor Power Dissipation ..................................................................(see Note 1) ............................. 250mW
Input to Output Isolation Voltage .......................................................................................................................................16kV
Input Diode Continuous Forward Current at (or below) 65°
C Free-Air Temperature .................................................. 100mA
Reverse Input Voltage ......................................................................................................................................................... 2V
Continuous LED Power Dissipation ..........................................................................(see Note 1) .............................. 250mW
Storage Temperature...................................................................................................................................... -65
Operating Free-Air Temperature Range ........................................................................................................ -55
Lead Solder Temperature (1/16” from case for 10 seconds max.).................................................................................240
C to +150°C
°
C to +125°C
°
C
°
Notes:
1. Derate linearly to 125°C free-air temperature at the rate of 2.45 mW/°C.
ANODE(+)
CATHO DE(-)
2 LEADS
0.500 MIN [12.70]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] NOMIN AL
Package Dimensions Schematic Diagram
A
(1)
Ø0.0175 [Ø0.44]
16,000 V, BLACK DOT
BASE
Ø0.0175 [Ø0.44]
EMITTER(-)
RED DOT
3 LEADS
0.500 MIN [12.70]
0.8493 [21.57]
COLLECTOR (+)
Ø0.1550 [Ø3.94]
Ø0.3100 [Ø7.87]
K
(2)
A
(1)
K
(2)
NOTE: BLACK DOT INDICATES ANODE FOR LED
RED DOT INDICATES COLLECTOR FOR
TRANSISTOR.
-X01
-X02
C
(3)
E
(5)
B
(4)
C
(3)
(5)
B
(4)
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
7 - 5
66005
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Input Diode Static Reverse Current 66005-X01
66005-X02
16kV HIGH VOLTAGE ISOLATER
I
R
100 µA V
R
= 2V
Input Diode Static Forward Voltage 66005-X01
66005-X02
Reverse Breakdown Voltage 66005-X01
66005-X02
Input Diode Capacitance 66005-X01
66005-X02
OUTPUT TRANSISTOR
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Collector-Emitter Breakdown Voltage V
Collector-Emitter Dark Current I
COUPLED CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
Current Transfer Ratio 66005-X01
66005-X02
Collector-Emitter Saturation Voltage 66005-X01
66005-X02
V
V
F
B
VR
C
IN
(BR)CEO
CEO
CTR 15
CE(SAT)
1.15 1.8 V IF = 20mA
210 V I
= 100µA
R
25 pF V = 0V, f = 1MHz
35 V IC = 1mA, I
75
300
nA
VCE = 10V, I
nA
%V
= 5V, I
CE
300
0.5
VI
= 50mA, I
F
1.2
= 0, IF = 0
B
= 0mA
F
= 10mA
F
= 1mA
C
DC Isolation Voltage 66005-X01
66005-X02
Rise Time 66005-X01
66005-X02
Fall Time 66005-X01
66005-X02
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Input Current, High Level I
Supply Voltage V
Operating Temperature T
PART # PART DESCRIPTION
66005-001 Transistor output, military operating range (-55° to +125°C)
66005-101 Transistor output, full mil-temp (-55° to +125°C) with 100% device screening (on discrete components)
66005-011
66005-002 Darlington output, military operating range (-55° to +125°C)
66005-102 Darlington output, full mil-temp (-55° to +125°C) with 100% device screening (on discrete components)
66005-012 Darlington output, commercial version Isolator (0° to 70°C)
Transistor output, commercial version Isolator (0° to 70°C)
V
ISO
16
16
t
r
t
f
FH
CE
SELECTION GUIDE
kV
15
25
µ
sV
= 5V, IF = 16mA, RL = 100
CC
Ω
15
25
µ
sV
CC
= 5V, I
= 16mA, RL = 100
F
Ω
16 50 mA
510 V
A
-55 125
°
C
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
7 - 6