MII 62074-102, 62074-101, 62074-002, 62074-001 Datasheet
FIBER OPTIC GaAlAs LIGHT EMITTING DIODE
62074
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
• Hermetically Sealed
• High Radiant Output for Fiber Optic Applications
• High Speed
• Spectrally Matched to the 61082 Series PIN
Diode
• Computer Peripheral Link
• Tempest Applications
• Mobile Communications
• Local Area Networks
DESCRIPTION
The 62074 Light Emitting Diodes are designed to interface with multimode fibers from 50/125 to 200/300 microns. These
LED’s convert electrical current into optical power that can be used in fiber optic communication. This series provides high
irradiance and is mounted on a TO-46 header with metal protective cap. Available binned to customer specifications and/or
screened to MIL-PRF-19500.
ABSOLUTE MAXIMUM RATINGS
25°C FREE AIR TEMPERATURE UNLESS NOTED
Storage Temperature............................................................................................................................................. -55°C to +150°C
Operating Temperature ......................................................................................................................................... -40°C to +125°C
Reverse Voltage( at 25°C case temperature) .........................................................................................................................1Vdc
Forward Current-Continuous................................... ....(See note 1).................................................................................... 100mA
Soldering Temperature (1/16 inch from case for 10 seconds)..........(See note 2) ............................................................... 240°C
Transmission Rate at 100mA I
NOTES:
1. Derate linearly to 125
2. RMA flux is recommended.
°C free-air temperature at the rate of 1.0 mA/°C.
....................................................................................................................................... 10Mbits/s
F
Package Dimensions Schematic Diagram
.131 [3.33]
.121 [3.07]
.220Ø [5.59]
.208Ø [5.28]
.185Ø [4.70]
.182Ø [4.62]
0.030 [0.76]
MAX
0.500 [12.70]
MIN
3 LEADS
0.019 Ø [0.48]
.016Ø [0.41]
CATHODE
ANODE
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
CASE
Ø0.100 [Ø2.54] NOM
45°
A
.048 [1.22]
.028 [0.71]
.046 [1.17]
.036 [0.91]
K
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
6 - 32
62074
FIBER OPTIC GaAlAs LIGHT-EMITTING DIODE
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
Output Power 62074-X01
62074-X02
Coupled Power Out 62074-XX1
62074-X02
Forward Voltage 62074-XXX
P
O
P
OC
V
F
2.5 7.5
150
50
2.0
mW IF = 100mA
µWI
VI
= 100mA
F
= 100mA
F
1
Reverse Breakdown Voltage 62074-XXX
Reverse Current 62074-XXX
Radiation Rise/Fall Time 62074-XXX
Peak Wavelength 62074-XXX
NOTES:
1. Tested using a 100/140µm fiber with a 0.29nA. Actual coupled power may vary due to alignment procedures and/or receptable and fiber tolerances.
B
VR
I
R
t
R
λ
P
1
610
10
830 870
VI
µA
ns
= 10µA
R
V
= 1.0V
R
IF = 100mA
Prebias @ 5 mA
nm IF = 50mA
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Forward Current I
Transmission Rate 10 MBits/S
F
75 100 mA
SELECTION GUIDE
PART NUMBER PART DESCRIPTION PO Range
62074-001 GaAlAs Fiber Optic LED in TO-46 package, commercial version 2.0-5.0
62074-101 GaAlAs Fiber Optic LED in TO-46 package (-55° to +125°C) with 100% screening 2.0-5.0
62074-002 GaAlAs Fiber Optic LED in TO-46 package, commercial version 2.5-5.0
62074-102 GaAlAs Fiber Optic LED in TO-46 package (-55° to +125°C) with 100% screening 2.5-5.0
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
6 - 33
Loading...