MII 61082-101, 61082-001 Datasheet

61082

FIBER OPTIC PIN PHOTODIODE

Mii

OPTOELECTRONIC PRODUCTS

DIVISION

Features:

Applications:

• Hermetically sealed

• Optimized for fiber optic applications using 50-

200

m fiber

µ

• Electrically isolated TO-46 package

• Mobile communication links

• Computer peripherals

• Computer links

• Industrial control links

• Spectrally matched to the 62074 series LED.

DESCRIPTION

The 61082 is designed for high speed use in fiber optic receivers. The case is electrically isolated to enhance EMI/RFI
shielding. The Pin Photodiodes are designed to interface with multimode optical fibers from 50-125 microns. Available custom
binned to customer specifications and/or screened to MIL-PRF-19500.

ABSOLUTE MAXIMUM RATINGS

Storage Temperature........................................................................................................................................... -65°C to +150°C

Operating Temperature (See part selection guide for actual operating temperature)....................................... -55°C to +125°C

Reverse Voltage .......................................................................................................................................................................25V

Power Dissipation (Derate at the rate of 2.0 mW/°C above 25°C) ....................................................................................200mW

Lead Soldering Temperature (1/16” (1.66mm) from case for 5 sec. with soldering iron)................................................... 240°C

Package Dimensions Schematic Diagram

.131 [3.33]
.121 [3.07]

.185Ø [4.70]
.182Ø [4.62]

0.030 [0.76]
MAX

ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]

3 LEADS

0.019 Ø [0.48]
.016Ø [0.41]

0.500 [12.70]
MIN

CATHODE

ANODE

CASE

Ø0.100 [Ø2.54] NOM

45°

.048 [1.22]
.028 [0.71]

.046 [1.17]
.036 [0.91]

A

K

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com

E-MAIL: [e-mail]

6 - 20

61082

FIBER OPTIC PIN PHOTODIODE

ELECTRICAL CHARACTERISTICS

TA = 25°C unless otherwise specified.

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE

Flux Responsivity 61082-XXX R 0.40 0.55

A/W

V

= 5.0V 2

R

Dark Current 61082-XXX

Peak Response Wavelength 61082-XXX

Rise Time 61082-XXX

Total Capacitance 61082-XXX C

Field of View 61082-XXX F

NOTES:

1. R

= 50Ω, 10%-90%.

L

2. Test @ V
fibers.

= 5V with 50/125 micron, 0.20 N.A. fiber, @ 10µW optical power @ 850nm. Responsivity levels apply to 50µm, 62.5µm and 100µm core optical

R

RECOMMENDED OPERATING CONDITIONS:

PARAMETER SYMBOL MIN MAX UNITS

Reverse Voltage V

Irradiance (H) H 15 25 mW/cm

PART NUMBER PART DESCRIPTION

61082-001 Photodiode in coax package, domed lens, commercial version
61082-101

Photodiode in coax package, domed lens (-55° to +100°C) with 100% screening +5µA

I

D

λ

P

t

r

T

OV

SELECTION GUIDE

10 nA VR = 5V, H = 0

880 nm

10 nS V

6pFV

80 degrees

R

510 V

= 15V 1

R

= 20V

R

I

Range

L

+5µA

2

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com

E-MAIL: [e-mail]

6 - 21