
61063
PHOTODIODE “PILL PACK”
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Applications:
• Hermetically sealed
• High sensitivity
• Small package
• Suitable for high-density pc board mounting
• Incremental encoding
• Reflective sensors
• Position sensors
• Level sensors
• Spectrally matched to the 62000 series LED.
DESCRIPTION
The 61063 is a Silicon Photodiode in a package designed to be mounted in a double-clad printed circuit board. It is
available in a range of sensitivities and is lensed for minimum response to stray light. High sensitivity, low dark current
leakage, and low saturation voltage make this device ideal for interfacing with TTL circuits. Available in custom binned to
customer specifications or screened to MIL-PRF-19500.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature......................................................................................................................................... -65°C to +150°C
Operating Temperature (See part selection guide for actual operating temperature)...................................... -65°C to +125°C
Reverse Voltage .....................................................................................................................................................................30V
Power Dissipation (Derate at the rate of 1.67 mW/°C above 25°C) ............................................................................... 150mW
Lead Soldering Temperature (3 minutes) ......................................................................................................................... 240
°
C
Ø0 .061 [1.55]
Ø0 .058 [1.47]
ANODE
0.067 [1.70]
0.063 [1.60]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
Package Dimensions Schematic Diagram
0.019 [0.48]
0.009 0.23]
0.088 [2.24]
0.082 [2.08]
CERAMIC
0.115 [2.92]
0.102 [2.59]
LENS
0.092 [2.34]
0.084 [2.13]
0.010 [0.25]
0.005 [0.013]
R0 .010 ±0.001 [0.25 ]
CATHODE
0.24 [0.61]
0.016 [0.41]
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
6 - 18

61063
SILICON PHOTODIODE “PILL PACK”
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
Light Current 61063-X01
I
L
6.0 15
µ
V
A
= 5.0V, H = 20mW/cm
R
2
1
Dark Current 61063-XXX
Reverse Breakdown Voltage 61063-XXX
Rise Time 61063-X01
Fall Time 61063-X01
Angular Response 61063-X01
I
D
V
BR
t
r
t
f
θ
15 V I
300 nS V
300 nS V
24 degrees 2
NOTES:6
1. Irradiance in mW/cm2 from a tungsten source at a color temperature of 2870K.
2. The angle between incidence for peak response and incidence for 50% of peak response.
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Reverse Voltage V
R
Irradiance (H) H 15 25 mW/cm
SELECTION GUIDE
PART NUMBER PART DESCRIPTION
61063-001 Silicon Photodiode in pill package, commercial version
61063-101
Silicon Photodiode in pill package (-55° to +100°C) with 100% screening +6µA
250 nA V
510 V
= 5V, H = 0 1
CE
= 100µA, H = 0
R
= 5V
R
= 5V
R
2
I
Range
L
+6µA
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
6 - 19