MII 61060-102, 61060-101, 61060-002, 61060-001 Datasheet

61060

PHOTODIODE “PIGTAIL”

Mii

OPTOELECTRONIC PRODUCTS

DIVISION

Features:

Applications:

• Hermetically sealed

• High sensitivity

• Small package

• Suitable for high-density pc board mounting

• Incremental encoding

• Reflective sensors

• Position sensors

• Level sensors

• Spectrally matched to the 62017 series LED.

DESCRIPTION

The 61060 is a Silicon Photodiode in a package designed to be mounted in a single-clad printed circuit board. It is available
with a wide angle flat lens or narrow angle domed lens for minimum response to stray light. High sensitivity, low dark current
leakage, and low saturation voltage make this device ideal for interfacing with TTL circuits. Also available with lead attached to
the case so that it may be connected without the use of a printed circuit board. Available in custom binned to customer
specifications or screened to MIL-PRF-19500.

ABSOLUTE MAXIMUM RATINGS

Storage Temperature........................................................................................................................................... -65°C to +150°C

Operating Temperature (See part selection guide for actual operating temperature)........................................ -55°C to +125°C

Reverse Voltage .......................................................................................................................................................................50V

Power Dissipation (Derate at the rate of 1.67 mW/°C above 25°C) ................................................................................... 75mW

Lead Soldering Temperature (3 minutes) ............................................................................................................................240°C

Package Dimensions Schematic Diagram

Ø0.0810

0.1730

0.450 min

A

K

0.1460

0.450 min

Ø0.0810

0.0490

ANODE

CATHODE

Dia = 0.018

-XX1

DIMENSIONS ARE IN INCHES

-XX2/XX3

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com

E-MAIL: [e-mail]

6 - 16

61060

SILICON PHOTODIODE “PIGTAIL”

ELECTRICAL CHARACTERISTICS

TA = 25°C unless otherwise specified.

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE

Light Current 61060-XXX

I

L

5.0 15

µA

V

= 5.0V, H = 20mW/cm

R

2

1

Dark Current 61060-XXX

Reverse Breakdown Voltage 61060-XXX

Rise Time 61060-XXX

Angular Response 61060-X01
61060-X02

I

D

V

BR

t

r

θ

50 V IR = 5µA, H = 0

300 nS V

30
12

NOTES:

1. Irradiance in mW/cm2 from a tungsten source at a color temperature of 2870K.

2. The angle between incidence for peak response and incidence for 50% of peak response.

RECOMMENDED OPERATING CONDITIONS:

PARAMETER SYMBOL MIN MAX UNITS

Reverse Voltage V

R

Irradiance (H) H 15 25 mW/cm

SELECTION GUIDE

PART NUMBER PART DESCRIPTION

61060-001 Photodiode in coax package, domed lens, commercial version
61060-101 Photodiode in coax package, domed lens with 100% screening
61060-002 Photodiode in coax package, flat lens, commercial version
61060-102 Photodiode in coax package, flat lens with 100% screening

25 nA V

= 10V, H = 0 1

R

= 5V,

R

degrees 2

510 V

2

I

Range

L

+5µA
+5µA
+5µA
+5µA

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com

E-MAIL: [e-mail]

6 - 17