![](/html/95/9527/952745a780605616ef9897dcf01a10b4abe4586f531f06858b1e6a8c05f63ada/bg1.png)
PRELIMINARY DATA SHEET
RADIATION TOLERANT, 90V - 0.8A
53253
DUAL POWER MOSFET OPTOCOUPLERS
Features:
Designed for 100 krad(Si) Total Dose
•
8-Pin Dual-In-Line Hermetic Package
•
Performance over –55°C to +125°C
•
Compact Isolation Solid State Switches
•
Continuous Output Current: 0.8 A
•
Optically Coupled between Input and Output
•
Isolation Tested to 1000 VDC
•
High Level of Transient Immunity
•
3 A Output Surge Current
•
Shock and Vibration Resistant
•
MIL-PRF-38534 screening optional
•
DESCRIPTION
(1)
Applications:
Satellite/Space systems
•
Military/High Reliability Systems
•
Standard 28 VDC and 48 VDC Load Driver
•
Aircraft Controls
•
Electromechanical and Solid State Relay
•
Replacement
I/O Modules
•
Switching Heaters
•
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
The 53253 is two power MOSFET optocouplers in a single 8-pin dual-in-line package suitable for applications where
two independent switches and radiation tolerant performance are required. The popular hermetic eight-pin dual-in-line
ceramic package combined with 1000 VDC isolation between input and output and between two isolated relays,
makes this device ideal for solid-state relay applications. Performance is specified over the full military temperature
range. This device is available as COTS, or screened to MIL-PRF-38534, Table C-IX, Class H or custom screening.
Lead options support both through-hole and surface-mount assembly. Gold plated leads are standard, but other lead
finishes per MIL-PRF-38534 are also available.
Functionally, the device operates as two SPST, normally open (2 Form A) solid-state relays. Each relay is actuated by
an input current, which can be driven from a standard TTL device. The input current biases a light emitting diode that is
optically coupled to an integrated photovoltaic diode array. The photovoltaic diode array energizes control circuitry that
operates the output MOSFET.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com 08/18/2001
![](/html/95/9527/952745a780605616ef9897dcf01a10b4abe4586f531f06858b1e6a8c05f63ada/bg2.png)
Preliminary Data Sheet 53253
Radiation Tolerant Dual Power MOSFET Optocouplers
ABSOLUTE MAXIMUM RATINGS:
(Per relay unless otherwise noted)
Storage Temperature Range ..………………………………………………………….........………........... -65°C to +150°C
Operating Ambient Temperature - T
Junction Temperature - T
..............................……………………………………………………...…..….........…. +150°C
J
...................……………………………………………….…....….. -55°C to +125°C
A
Lead Solder Temperature for 10 seconds .......................………………………………………....…...….............. +260°C
(1.6 mm below seating plane)
Average Input Current - I
Peak Repetitive Input Current - I
....................…...……………………………………………………….......................... 20 mA
F
.............……………………………………...…………..………...................... 40 mA
Fpk
(pulse width < 100 ms; duty cycle < 50%)
Peak Surge Input Current - I
Continuous Output Current per relay - I
Single Shot Output Current per relay- I
Output Voltage - V
............................…...………………………………………….……………….…….............. 90 VDC
O
surge .............…………………………………..……………………................... 100 mA
Fpk
(pulse width < 0.2 ms; duty cycle < 0.1%)
...…………………………………....………..............................…....... 0.8 A
O
surge (pulse width < 10 ms) ………..……………..…...………………...... 3 A
Opk
(1)
RECOMMENDED OPERATING CONDITIONS:
Parameter Symbol Min. Max. Units
Input Current (ON) I
Input Voltage (OFF) V
F (ON)
F (OFF)
Operating Temperature T
A
520mA
00.6VDC
-55 +125
C
°
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com 08/18/2001