MII 53211, 53210, 53209 Datasheet
53209
53210 SPDT SOLID-STATE RELAYS
53211 High Power AC/DC Switching
Mii
MICROCIRCUITS PRODUCTS
DIVISION
Features:
• Replacements for M30-1, M30-3, M30-4
• SPDT, Break-Before-Make
• Up to 1500 V RMS optical isolation
• Output voltage up to
• Power FET output low on-state resistance
• Full military temperature operation:
-55ºC to +125ºC
• Military environmental screening available
320 VDC (53211)
±
Applications:
• High power switching
• Line drivers
• Servo control
• Harsh environment
• Load control
• General purpose switching
DESCRIPTION
The 53209, 53210, and 53211 are military SPDT high power, solid-state relays. These light-weight devices are resistant to
damage from shock and vibration, and are immune to contact-related problems (contamination, arcing) associated with
mechanical equivalents.
Optical coupling between the input and output stages provides effective isolation up to 1500 volts AC RMS. Power FET
outputs eliminate bipolar offset, and minimize output voltage drop for high current capability.
The control logic is CMOS compatible, and will accommodate bias supplies ranging between 4 and 16 VDC. A TTL input
driver with pull-up resistor may also be used.
These solid-state relays are ideal for use in military systems, or wherever high reliability, low power actuation, and light
weight are design considerations. Applications include general purpose signal switching and electronic load control.
ABSOLUTE MAXIMUM RATINGS
Isolation Voltage
Continuous Operating Output Voltage: 53209 ............................................................................................................. ±80 Peak
Load Current
Bias Supply Voltage, V
Control Logic Input Voltage ..............................................................................................................................................16 VDC
Operating Temperature ...........................................................................................................................-55ºC to +125ºC Case
Storage Temperature ........................................................................................................................................-55ºC to +125ºC
Notes:
1
60 Hz sine wave 2 at 25ºC with 2.0º C/W heat sink max
1
................................................................................................................................................ 1500 VAC RMS
53210 ......................................................................................................... ±160 Peak
2
: 53209 ...............................................................................................................................................4.1 A RMS
53210 ..............................................................................................................................................2.6 A RMS
53211...............................................................................................................................................1.3 A RMS
................................................................................................................................................16 VDC
DD
53211 ......................................................................................................... ±320 Peak
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com 8/12/02
Pg. 1 of 4
53209, 53210, & 53211
SPDT SOLID-STATE RELAYS
ELECTRICAL CHARACTERISTICS
T
= +25° C
A
PARAMETER CONDITIONS MIN TYP MAX UNITS
Isolation Voltage, I/O 60 Hz Sine Wave 1500 VAC RMS
Isolation Resistance at 500 V 109 Ohms
Continuous Operating Output Voltage
53209
53210
53211
Transient Output Voltage
53209
53210
53211
Load Current
53209
2.0 ºC/W Heat Sink
53210
53211
On Resistance
53209
53210
53211
Capacitance, I/O 25 V, 1 MHz 5 pF
Leakage Current Load Voltage = Maximum 20
Bias Supply Voltage, VDD 4 16 VDC
Bias Current 13 16 mA
Control Logic Voltage 16 VDC
Control Logic Current 2
Control Logic Level – High 0.75
Control Logic Level – Low 0 0.15 VDD VDC
tr (Rise Time)
t
(Turn-On-Time)
on
t
(fall Time)
f
t
(Turn-Off Time)
off
t
(Dwell Time)
d
Load Voltage = 28 VDC
Thermal Resistance, θJA
θ
JC
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
80
160
320
VAC Peak
VAC Peak
VAC Peak
80
180
380
4.1
VAC Peak
VAC Peak
VAC Peak
Amps
2.6
1.3
= 25ºC
T
A
R
= 50Ω
L
20
0.6
1.5
6.0
V
DD
0.5
V
3.0
VDC
DD
4.0
50
250
1.5
ºC/W
Ohms
Ohms
Ohms
4.2
E-MAIL: hybridsales@micropac.com 8/12/02
RMS
µA
µA
ms
ms
µs
µs
ms
ºC/W
Pg. 2 of 4
Loading...