MII 53204, 53203, 53200 Datasheet
53200
53203
53204
Features:
• Replacements for M31-1, M31-1A, M31-2 A
• SPDT, Break-Before-Make
• Up to 1500 V RMS Optical Isolation
• Output current up to 8.2 Amps (53203)
• Power FET Output Low On-state Resistance
• Full Military Temperature Operation:
-55ºC to +125ºC
• Military Environmental Screening Available
DESCRIPTION
The MII 53200, 53203, and 53204 are military SPDT high power, solid-state relays. These light-weight devices are resistant
to damage from shock and vibration, and are immune to contact-related problems (contamination, arcing) associated with
mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1500 volts
AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop for high current capability. The
control logic is CMOS compatible, and will accommodate bias supplies between 4 and 16 VDC. A TTL input driver with pullup resistor may also be used. These solid-state relays are ideal for use in military systems, or wherever high reliability, low
power actuation, and light-weight are design considerations. Applications include general-purpose signal switching and
electronic load control.
ABSOLUTE MAXIMUM RATINGS
Isolation Voltage
Continuous Operating Output Voltage
Load Current
Bias Supply Voltage, V
Control Logic Input Voltage ..............................................................................................................................................16 VDC
Operating Temperature ........................................................................................................................... -55ºC to +125ºC Case
Storage Temperature .........................................................................................................................................-55ºC to +125ºC
Notes:
permanent damage.
1
1
.................................................................................................................................................1000 VAC RMS
2
: 53200 ...........................................................................................................................................4.8 Amps DC
53203 ..........................................................................................................................................8.2 Amps DC
53204...........................................................................................................................................5.2 Amps DC
.................................................................................................................................................16 VDC
DD
60 Hz sine wave 2 at 25ºC with 2.0º C/W heat sink 3 Reversing polarity on the output may cause
SPDT SOLID-STATE RELAYS
Applications:
• Heater Load Switching
• Sensor Activation
• Remote Signal Activation
• Servo and synchro control
• High power switching
3
: 53200...............................................................................................................80 VDC
53203 ..............................................................................................................80 VDC
53204 ............................................................................................................160 VDC
MICROCIRCUITS PRODUCTS
Mii
DIVISION
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
www.micropac.com
E-MAIL:
hybridsales@micropac.com
8/12/02
Pg. 1 of 4
53200, 53203, and 53204 SPDT SOLID-STATE RELAYS
ELECTRICAL CHARACTERISTICS
TA = +25° C
PARAMETER CONDITIONS MIN TYP MAX UNIT
Isolation Voltage, I/O 60 Hz Sine Wave 1500 VAC RMS
Isolation Resistance Input to Case, at 50V 109 Ohms
Continuos Operating Output Voltage
53200
53203
53204
Transient Output Voltage
53200
53203
53204
Load Current: 53200
53203
53204
On Resistance: 53200
53203
53204
2.0 ºC/W Heat Sink 4.8
80
80
160
80
80
180
8.2
5.2
0.3
0.15
0.38
Capacitance, I/O 25 V, 1 MHz 5 PF
Leakage Current: 53200
53203
53204
Load Voltage =
Maximum
20
40
40
Bias Supply Voltage, VDD 4 16 VDC
Bias Current 13 16 MA
Control Logic Voltage 16 VDC
Control Logic Current 2 µA
Control Logic Level – High 0.75
VDC
VDD
Control Logic Level – Low 0 0.15 VDD VDC
tr (Rise Time): 53200
53203
53204
ton (Turn-On-Time): 53200
53203
53204
Load Voltage = 25 VDC
R
= 50Ω
L
3.0
2.0
3.0
3.0
4.0
4.0
tf (Fall Time) 50 µs
t
(Turn-Off-Time): 53200
off
53203
53204
200
250
250
td (Dwell Time) 0.5 1.5 ms
Thermal Resistance, θJA:
53200
53203
53204
Thermal Resistance, θJC:
53200
53203
53204
23
20
20
7.0
4.2
4.2
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
www.micropac.com
E-MAIL:
hybridsales@micropac.com
8/12/02
VDC
VDC
VDC
VDC
VDC
VDC
Amps DC
Amps DC
Amps DC
Ohms
Ohms
Ohms
µA
µA
µA
ms
ms
ms
ms
ms
ms
µs
µs
µs
ºC/W
ºC/W
ºC/W
ºC/W
ºC/W
ºC/W
Pg. 2 of 4
Loading...