MII 52175, 52150 Datasheet

52150/52175

78HGA REPLACEMENT

POSITIVE ADJUSTABLE 5-AMP
VOLTAGE REGULATOR

Mii

HYBRID MICROELECTRONICS

PRODUCTS DIVISION

Features:

Replacement for 78HGA

•

5.0 A Output Current

•

Internal Current And Thermal Limiting

•

Internal Short Circuit Current Limit

•

Low Drop-Out Voltage (Typically 2.3 V @ 5.0

•

A)

50W Power Dissipation

•

Electrically Isolated Case

•

Steel TO-3 Case

•

ORDER INFORMATION

52150 Standard
52175 MIL-STD-883 Screened

DESCRIPTION

The 52150/52175, which is a replacement for the 78HGA, is an adjustable 4-terminal positive voltage regulator
capable of supplying in excess of 5.0 A over a 5.0 V to 24 V output range. Only two external resistors are required to
set the output voltage. It is packaged in a hermetically sealed TO-3, and provides 50W power dissipation. The
regulator consists of a monolithic chip driving a discrete series-pass element. A beryllium-oxide substrate is used in
conjunction with an isothermal layout to optimize the thermal characteristics of each device and still maintain electrical
isolation between the various chips. This unique circuit design limits the maximum junction temperature of the power
output transistor to provide full automatic thermal overload protection. If the safe operating area is ever exceeded
(Note 1), the device simply shuts down rather than fail or damage other system components. This feature eliminates
the need to design costly regulators built from discrete components.

Applications:

Designed for use in general purpose

•

applications where adjustability is
advantageous.

•

Military and Hi Rel Industrial applications where
hermeticity is required.

ABSOLUTE MAXIMUM RATINGS

Input Voltage................................................................................................................................................................. 40 V

Internal Power Dissipation @T

Maximum Input-to-Output Voltage Differential ............................................................................................................35 V

Operating Junction Temperature .............................................................................................................................. 150°C

Storage Temperature Range ................................................................................................................... -55°C to +150°C

Pin Temperature (Soldering, 60 seconds)................................................................................................................ 300°C

Commercial Temperature Range 52150 .....................................................................................................0°C to +125°C

Military Temperature Range 52175 ......................................................................................................... -55°C to +125°C

= 25°C....................................................................................................................... 50W

c

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: [e-mail]

12/13/01

1

52150/52175

POSITIVE ADJUSTABLE 5-AMP VOLTAGE REGULATOR

ELECTRICAL CHARACTERISTICS

= 25ºC, V

T

J

= 10 V and I

IN

= -2.0A unless otherwise specified

OUT

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT

Output Voltage (Note 4) V

Line Regulation (Note 2)
Load Regulation (Note 2)
Quiescent Current I

OUT

V

∆

OUT

V

∆

OUT

Q

Ripple Rejection RR I

Output Noise V

Dropout Voltage (Note 5) V

Short-Circuit Current

n

DD

I

OS

I

V

IN

OUT

= V

= 2.0A,

+ 3.5V

OUT

5.0 24 V

VIN = 7.5 to 25V 0.2% 1% V

10mA ≤ I

I

OUT

OUT

f = 210Hz, 5.0V

10Hz ≤ f ≤ 100 kHz

= V

V

IN

I

OUT

I

OUT

VIN = 15V, V

5.0A 0.2% 1% V

≤

OUT

= 0 3.4 10 mA

= 1.0A,

pk-pk

60 dB

50

+ 5.0V

OUT

= 5.0A
= 3.0A

OUT

2.3

2.0

= 5V 7.0 12.0 A

2.5

2.3

V

µ

RMS

V
V

Limit
Control Pin Voltage V

C

4.85 5.0 5.25 V

NOTES:

1. This voltage regulator offers output transistor safe-area protection. However, to maintain full protection, the
device must be operated within the maximum input-to-output voltage differential rating listed on the data sheet
under “Absolute Maximum Ratings”. For applications violating these limits, device will not be fully protected.

2. Load and line regulation are specified at constant junction temperature. Pulse testing is required with a pulse
width ≤ 1 ms and a duty cycle ≤ 5%. Full Kelvin connection methods must be used to measure these parameters.

3. The performance characteristics of the adjustable series (78HGA) is specified for V

= 5.0 V, unless otherwise

OUT

noted.

4. V

is defined as V

OUT

= R1+ R2 (V

OUT

) where R1 and R2 are defined in the Basic Test Circuit diagram.

CONT

R2

5. Dropout Voltage is the input-output voltage differential that causes the output voltage to decrease by 5% of its
initial value.

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: [e-mail]

12/13/01

2