MII 51992 Datasheet
51992
CURRENT DRIVER
DSCC DWG #5962-87617
(Replacement for DH0006)
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
• Operation from a Single +10V to +45V Power
Supply
• Low Standby Power Dissipation of only 35mW
for 28V Power Supply
• 1.5A, 50ms on, 1 sec off, Pulse Capability
• Meets MIL-PRF-38534 Class H Requirements
• Environmentally Screened per MIL-STD-883
DESCRIPTION
The 51992 is a high voltage current driver with DTL compatible TTL logic levels and drive a load up to 400 mA at 28V.
Should additional gating be required, AND inputs are provided along with an Expander connection. The addition of an
external capacitor provides control of the rise and fall times of the output in order to decrease cold lamp surges or to
minimize electromagnetic interference if long lines are driven. Device can be gated On and Off at normal inputs or at pin 8.
Since one side of the load is normally grounded there is less likelihood of false turn-on due to an inadvertent short in the
drive line.
Meets the requirements of SMD 5962-87617.
ABSOLUTE MAXIMUM RATINGS
Applications:
• Military / High Reliability Systems
• Aircraft Engine Environment
• Controls – High Current
• Pulse Applications
• Lamp Driver
Peak Power Supply Voltage (for less than 0.1s) ................................................................................................................... 60V
Continuous Supply Voltage ....................................................................................................................................................45V
Input Voltage …………..……………………………………………………………………………………………………………5.5V
Input Expander Current ......................................................................................................................................................5.0mA
Peak Output Current (50ms On 1 sec. Off)...........................................................................................................................1.5A
Continuous Output Current ................................................................................................................................................... 0.4A
Operating Temperature ......................................................................................................................................-55ºC to +125ºC
Storage Temperature .........................................................................................................................................-65ºC to +150ºC
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com E-MAIL: hybridsales@micropac.com
12/18/01
1
51992
CURRENT DRIVER
ELECTRICAL CHARACTERISTICS
(-55ºC ≤ Ta ≤ +125ºC)
PARAMETER CONDITIONS MIN MAX UNITS
Logical “1” Input Voltage 10V ≤ Vcc ≤ 45V 2.0 V
Logical “0” Input Voltage 10V ≤ Vcc ≤ 45V 0.8 V
Logical “1” Output Voltage V
Logical “0” Output Voltage V
= 10V, Vin = 2V, I
cc
V
= 28V, Vin = 2V, RL = 82
cc
= 45V, V
cc
Logical “1” Input Current V
Logical “0” Input Current V
“Off” Power Supply Current V
“On” Power Supply Current V
Rise Time V
Fall Time V
Turn on Time V
Turn off Time V
= 45V, Vin = 2V, I
cc
= 28V, V
cc
= 28V, V
cc
= 28V, V
cc
= 28V, V
cc
= 150mA
out
Ω
= 0.8, RL = 1K
in
= 45V, Vin = 2.4V
cc
V
= 45V, Vin = 5.5V
cc
= 45V, Vin = 0.4V -1.0 mA
cc
= 45V, Vin = 0.8V 2.0 mA
cc
out
= 5V, RL = 82
in
= 5V, RL = 82
in
= 5V, RL = 82
in
= 5V, RL = 82
in
Ω
= 0mA 8.0 mA
Ω
Ω
Ω
Ω
8.8
26.5
10 mV
5.0
100
300 ns
1.5
1.0
5.2
V
V
A
µ
A
µ
s
µ
s
µ
s
µ
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com E-MAIL: hybridsales@micropac.com
12/18/01
2
Loading...