Mii 4N22, 4N23, 4N24 Technical data
查询4N22供应商
4N22
4N23
4N24
JAN, JANTX, JANTXV,
SINGLE CHANNEL OPTOCOUPLERS
OPTOELECTRONIC PRODUCTS
Features:
Applications:
• Overall current gain...1.5 typical (4N24)
• Base lead provided for conventional transistor
biasing
• Rugged package
• High gain, high voltage transistor
• Eliminate ground loops
• Level shifting
• Line receiver
• Switching power supplies
• Motor control
• +1kV electrical isolation
DESCRIPTION
Gallium Aluminum Arsenide (GaAlAs) infrared LED and a high gain N-P-N silicon phototransistor packaged in a hermetically
sealed metal case. The 4N22, 4N23 and 4N24’s can be tested to customer specifications, as well as to MIL-PRF-19500 JAN,
JANS, JANTX and JANTXV quality levels.
Mii
DIVISION
*ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage........................................................................................................................................................
±
1kV
Emitter-Collector Voltage..........................................................................................................................................................4V
,
Collector-Emitter Voltage (
Collector-Base Voltage (
V
V
CEO
CEO
,
) .................................................................................................................................... 35V
IF = 0
) .......................................................................................................................................35V
IF = 0
Reverse Input Voltage ............................................................................................................................................................. 2V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) .................................... 40mA
s PRR < 300 pps) ..............................................................................1A
Peak Forward Input Current (Value applies for tw
< 1µ
Continuous Collector Current ..............................................................................................................................................50mA
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................300mW
Storage Temperature..........................................................................................................................................-65°C to +125°C
Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C
Lead Solder Temperature (1/16” (1.6mm) from case for 10 seconds) .............................................................................. 240°C
Notes:
1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C.
2. Derate linearly to 125°C free-air temperature at the rate of 5 mW/°C above 65°C.
* JEDEC registered data
0.305 [7.75]
0.335 [8.51]
NOTE: ALL LINEAR DIMENSIONS ARE IN INCHES (MILLIMETERS)
Package Dimensions Schematic Diagram
0.040 [1.02]
MAX.
0.016Ø [0.41]
0.019Ø [0.48]
0.500 [12.70]
0.155 [3.94]
0.185 [4.70]
6 LEADS
0.022Ø [5.08]
MIN.
5
6
3
2
1
0.034 [0.864]
0.028 [0.711]
TO5
7
45°
0.045 [1.14]
0.029 [0.73]
A
5
K
7
C
3
E
1
B
2
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
3 - 7
4N22, 4N23, and 4N24
JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS
*ELECTRICAL CHARACTERISTICS INPUT LED
TA = 25°C Unless otherwise specified
PARAMETER SYMBOL MIN MAX UNITS TEST CONDITIONS NOTE
Input Diode Static Reverse Current I
Input Diode Static Forward Voltage -55°C
+25
°
C
+125°C
*OUTPUT TRANSISTOR
TA = 25°C Unless otherwise specified
R
V
F
0.8
0.7
100 µA VR = 2V
1
1.5
1.3
VI
1.2
= 10mA
F
PARAMETER SYMBOL MIN MAX UNITS TEST CONDITIONS NOTE
Collector-Base Breakdown Voltage V
Collector-Emitter Breakdown Voltage V
Emitter-Base Breakdown Voltage V
*COUPLED CHARACTERISTICS
TA = 25°C Unless otherwise specified
(BR)CBO
(BR)CEO
(BR)EBO
35 V IC = 100µA, I
35 V IC = 1mA, I
4VI
= 0, IE = 100µA, IF = 0
C
= 0, IF = 0
B
= 0, IF = 0
B
PARAMETER SYMBOL MIN MAX UNITS TEST CONDITIONS NOTE
On State Collector Current 4N22
4N23
I
C(ON)
4N24
On State Collector Current 4N22
4N23
I
C(ON)
4N24
On State Collector Current 4N22
-55°C 4N23
I
C(ON)
4N24
On State Collector Current 4N22
+100°C 4N23
I
C(ON)
4N24
Off State Collector Current +25°CI
Off State Collector Current +100°CI
Collector-Emitter Saturation Voltage 4N22
4N23
4N24
Input to Output Resistance ALL R
Input to Output Capacitance ALL C
Rise Time 4N22
4N23
4N24
Fall Time 4N22
4N23
4N24
C(OFF)
C(OFF)
V
CE(SAT)
V
CE(SAT)
V
CE(SAT)
t
t
t
t
t
t
I-O
I-O
r
r
r
f
f
f
NOTES:
1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.
0.15
0.2
0.4
2.5
10
2.5
2.5
10
6
1
4
1
4
100 nA V
100
0.3
0.3
0.3
11
5 pF F = 1MHz, V
15
15
20
15
15
20
mA V
= 5V, IB = 0, IF = 2mA
CE
mA
V
= 5V, IB = 0, IF = 10mA
CE
mA
V
= 5V, IB = 0, IF = 10mA
CE
mA
V
= 5V, IB = 0, IF = 10mA
CE
= 20V, IB = 0, IF = 0mA
CE
µ
AV
V
V
V
= 20V, IB = 0, IF = 0mA
CE
IC = 2.5mA, IB = 0, IF = 20mA
IC = 5mA, IB = 0, IF = 20mA
IC = 10mA, IB = 0, IF = 20mA
V
µ
s
µ
s
µ
s
µ
s
µ
s
µ
s
V
= 10V, IF = 10mA, RL = 100
CC
V
= 10V, IF = 10mA, RL = 100
CC
= 1kV 1
IN-OUT
= 1kV 1
IN-OUT
Ω
Ω
4N22, 4N23, and 4N24
JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS
RECOMMENDED OPERATING CONDITIONS:
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
3 - 8
Loading...