MII 42118-030, 42118-024, 42118-018, 42118-015, 42118-012 Datasheet
...
42118
POSITIVE HIGH TEMPERATURE
FIXED VOLTAGE REGULATOR
Designed for use in high temperature environments
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
• Operating temperature +200º
C
• Output current to 1.0 A
• Input voltage to +30 V
• Internal short circuit protection, foldback and
Applications:
• Military and Hi Rel Industrial harsh environment
applications where hermetically sealed product is
required
• Down hole applications
current limiting
• Isolated TO-258 package
DESCRIPTION
The 42118 series of fixed voltage regulators covers the output voltage range from +5 VDC through +30 VDC. These voltage
C. These devices are
regulators are fabricated using hybrid techniques and will operate at temperatures up to +200
º
complete with internal short circuit protection, which includes voltage shutdown and current foldback. The 42118 series
voltage regulators normally do not require any additional components. However, for good design practice, an external filter
cap of 2
F should be installed at the input, as close to the case as possible.
µ
ABSOLUTE MAXIMUM RATINGS AT 200°C CASE TEMPERATURE
Output Current (I
Input Voltage (V
Storage Temperature (T
) ............................................................................................................................................................1.0 A
OUT
) ........................................................................................................................................................ +38 VDC
IN
)............................................................................................................................................. +250°C
STG
Power Dissipation (Pd) ........................................................................................................................................................... 8 W
Typical Connection Diagram
D1
HEADER
RECTIFIED
INPUT
AS REQUESTED
V
IN
+ COMMON +
2uf
2
V
OUT
REGULATED
OUTPUT
AS REQUESTED
Note: D1 should be installed for input safety.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com E-MAIL: hybridsales@micropac.com 08/03/01
POSITIVE HIGH TEMPERATURE, FIXED VOLTAGE REGULATOR
ELECTRICAL CHARACTERISTICS
42118
PARAMETER
*Output voltage I
TEST CONDITIONS
OUT
V
= V
IN
*Line regulation VIN = (V
to +38
I
OUT
Load regulation VIN = V
= 0.05 to 1.0 A
I
OUT
Ripple rejection at 120 Hz VIN = V
I
L
Standby current VIN = V
Short circuit current VIN = V
Short circuit current VIN = V
Foldback current (knee) VIN = V
Foldback current (knee) VIN = V
Noise output VIN = V
I
OUT
Differential voltage
V= VIN – V
(
∆
*V
= 10V Min
IN
OUT
)
I
OUT
TEMPERATURE TYPICAL
= 1.0 A
+3 VDC
OUT
+3 VDC)
OUT
DC
+25°C to +200°C V
+25°C to +200°C V
OUT
OUT
±1.0%
±0.5%
= 50 mA
+5 VDC
OUT
+25°C to +200°C V
±0.5% @ 25ºC
OUT
± 1.0% @ 200ºC
+5 VDC
OUT
+25°C -50 dB
= 300 mA
+5 VDC
OUT
= 0
I
OUT
+5 VDC +25°C 400 mA
OUT
+5 VDC +200°C 200 mA
OUT
+5 VDC +25°C 2 A
OUT
+5 VDC +200°C 1.5 A
OUT
+5 VDC
OUT
+25°C 30 mA
+25°C 2 mVRMS
= 300 mA
= 300 mA +25°C to +200°C 3 VDC MIN
TABLE 1 (see note)
TYPE V
(volts) MAX I
OUT
(amps) I
OUT
KNEE
TYP
(amps at
C)
25
°
42118-005 5 1.0 2.0
42118-012 12 1.0 2.0
42118-015 15 1.0 2.0
42118-018 18 1.0 2.0
42118-024 24 1.0 2.0
42118-030 30 1.0 2.0
NOTE: Under condition (V
– V
IN
OUT)
x l
≤ 8 watts at 200°C
OUT
Option: 1) Other output voltage available
2) MIL-STD-883 type screening available
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com E-MAIL: hybridsales@micropac.com 08/03/01
Loading...