MII 42115 Datasheet

42115

OPERATIONAL AMPLIFIER

DSCC DWG #5962-9082801

Replacement for OPA511 and PA 10

Mii

HYBRID MICROELECTRONICS

PRODUCTS DIVISION

Features:

• Wide Supply Voltage Range (±10 to ±50 Volts)

• High Output Current (5A Peak)

Small Size (TO-3, 8 Pins)

•

• Low Cost

DESCRIPTION

The 42115 ( DSCC Drawing #5962-9082801) is a high power, high voltage, high current, power operational amplifier which
also is an alternate to the popular OPA511 and PA10. The high current output stage delivers 5A and has externally
adjustable current limiting capability. This Hybrid IC is housed in an 8 pin, hermetic TO-3 and is designed for driving
inductive, capacitive and resistive loads.

Applications:

• Programmable Power Supplies

• Motor, Valve & Actuator Controls

Audio Amplifiers

•

• Magnetic Deflection Circuits

ABSOLUTE MAXIMUM RATINGS

Power Supply Voltage (VCC) .................................................................................................................................±50VDC

Differential Input Voltage ......................................................................................................................................±VCC -3V

Common Mode Input Voltage .....................................................................................................................................±V

CC

Operating Temperature Range (case) .................................................................................................... -55°C to +125°C

Storage Temperature Range ................................................................................................................... -65°C to +150°C

Output Current ..................................................................................................................................................... 5A Peak

Power Dissipation at TC = 25°C ..................................................................................................................................67W

Lead Temperature (Soldering < 10 sec)................................................................................................................. +300°C

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: [e-mail]

42115

OPERATIONAL AMPLIFIER DESC DWG #5962-9082801

Mechanical Configuration

A

C

K

R

SEATING PLANE

Q

B

E

D

H

G

F

1

8

J

2

3

4

5

6

7

Note: Leads in true position with 0.010” (0.25mm) R at MMC at seating plane

Pin Numbers shown for reference only. Numbers may not be marked on package.

DIM

A
B
C

D
E

F
G
H

J
K
Q
R

INCHES MILLIMETERS ELECTRICAL

CONNECTIONS

MIN MAX MIN MAX

1.510 1.550 38.35 39.37 Pin 2

0.760 0.780 19.30 19.81 Pin 3

Pin 1 Output

+

CL
+V

C

0.290 7.37 Pin 4 +IN

0.97 1.07 0.038 0.042 Pin 5 -IN

0.080 0.100 2.03 2.54 Pin 6

-V

S

40º BASIC 40º BASIC Pin 7 F.O.

.500 BASIC 12.7 BASIC Pin 8 CL-

1.186 BASIC 30.12 BASIC
.593 BASIC 15.06 BASIC

0.460 0.500 11.68 12.70

0.151 0.161 3.84 4.09

0.990 1.010 25.15 25.65

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: [e-mail]