MII 42109 Datasheet

42109

OPERATIONAL AMPLIFIER

DSCC DWG #5962-9065901

Replacement for PA12

Mii

HYBRID MICROELECTRONICS

PRODUCTS DIVISION

Features:

• Wide Supply Voltage Range (±10 to ±50 Volts)
High Output Current (15A Peak)

•

• Small Size (TO-3, 8 Pins)

• Low Cost

DESCRIPTION

The 42109, DSCC drawing #5962-9065901 is a high power, high voltage, high current, power operational amplifier and is a
replacement for the PA12. The Op Amp is designed to drive capacitive, inductive and sensitive loads. The device is
complete with current limiting using external resistors, and fabricated using hybrid techniques to maximize reliability,
minimize size and give top performance.

Applications:

• Motor, Valve and Actuator Control
Magnetic Deflection Circuits

•

• Audio Amplifiers

• Power Transducers

ABSOLUTE MAXIMUM RATINGS

Power Supply Voltage (VCC) .................................................................................................................................±50VDC

Differential Input Voltage ......................................................................................................................................±VCC -3V

Common Mode Input Voltage .....................................................................................................................................±V

CC

Operating Temperature Range (case) .................................................................................................... -55°C to +125°C

Storage Temperature Range ................................................................................................................... -65°C to +150°C

Output Current .................................................................................................................................................... 15A Peak

Power Dissipation at TC = 25°C ................................................................................................................................125W

Lead Temperature (Soldering < 10 sec)................................................................................................................. +300°C

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: [e-mail]

05/17/01

42109

OPERATIONAL AMPLIFIER DESC DWG #5962-9065901

Mechanical Configuration

A

C

K

R

SEATING PLANE

Q

B

E

D

H

G

F

1

8

J

2

3

4

5

6

7

Note: Leads in true position with 0.010” (0.25mm) R at MMC at seating plane

Pin Numbers shown for reference only. Numbers may not be marked on package.

DIM

A
B
C

D
E

F
G
H

J
K
Q
R

INCHES MILLIMETERS ELECTRICAL

CONNECTIONS

MIN MAX MIN MAX

1.510 1.550 38.35 39.37 Pin 2

0.760 0.780 19.30 19.81 Pin 3

Pin 1 Output 1

+

CL
+V

C

0.290 7.37 Pin 4 +IN

0.97 1.07 0.038 0.042 Pin 5 -IN

0.080 0.100 2.03 2.54 Pin 6

-V

C

40º BASIC 40º BASIC Pin 7 N.C.

.500 BASIC 12.7 BASIC Pin 8 CL-

1.186 BASIC 30.12 BASIC
.593 BASIC 15.06 BASIC

0.460 0.500 11.68 12.70

0.151 0.161 3.84 4.09

0.990 1.010 25.15 25.65

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]

www.micropac.com E-MAIL: [e-mail]

05/17/01