Miglia Technology Alchemy TV User Manual

AlchemyTV DVR

User Guide

Revision 2.2

(c) 2003-2004, Miglia Technology Ltd

Table of contents

Introduction and Overview of AlchemyTV DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Introduction and System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Overview of AlchemyTV DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Hardware and software installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Hardware installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Software installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Setting up the TV tuner for viewing and recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Serial Number and Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Setting up AlchemyTV DVR for TV reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Using the AlchemyTV DVR Menus and Onscreen Remote . . . . . . . . . . . . . . . . . . . . . . . . .15

AlchemyTV DVR Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

AlchemyTV DVR Onscreen Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Using the AlchemyTV DVR Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

AlchemyTV DVR preferences overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

The Storage menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

The Video input menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

The image sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

The Video compression sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

The Video compression Expert settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

The Size sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

The Audio sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

The Audio Expert settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

The TV Tuner sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Channel Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

The plugins menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Scheduling a recording with AlchemyTV DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Schedule a recording with AlchemyTV DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

iCal Synchronisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Scheduling a recording with TitanTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Registering with TitanTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

TitanTV plug-in settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Scheduling a recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Plug-ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

AlchemyTV DVR SDK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Installing Third-Party Plug-ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Using the Plug-ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Current Plug-ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

The infrared remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

The remote control settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

QuickTime Codecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Recommended codecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Third party codecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

License agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Introduction and Overview

of AlchemyTV DVR

AlchemyTV DVR™ User Guide

Page 1

Introduction

Thank you for choosing AlchemyTV DVR™ from Miglia Technology. AlchemyTV DVR™ allows you to
watch TV on your PowerMac and enables you to record your favorite programmes onto your hard
drive in a supported QuickTime format of your choice.

System requirements:

• PowerMac G4 or G5 with a free PCI or PCI-X slot

• G4/400 MHz or higher processor

• 256 MB of RAM

• Mac OS X 10.2.8 or higher

• QuickTime 6.5 or higher

Package contents

• AlchemyTV™ DVR card

• CD-ROM with software and installation guide

• Infrared remote control

• Infrared remote control receiver

• Warranty card

User Guide Overview

This User Guide will guide you through the hardware and software installation as well as explain the
functions and options of the AlchemyTV DVR™ software.

Technical Support

Should you ever have any questions regarding your product, please do not hesitate to contact Miglia
Technology:

AlchemyTV DVR™ User Guide

Page 2

Miglia Technology Ltd

Unit 1, The Old Silk Mill
Brook Street
Tring
HP23 5EF
United Kingdom
Tel: [phone]
Fax: [phone]
E-mail: [e-mail], for general enquiries

[e-mail], for technical enquiries

Web: http://www.miglia.com

Overview of AlchemyTV DVR™

Video inputs

AlchemyTV™ features several video inputs:

• TV input

• Composite input

• S-Video input

• Stereo audio input (jack type)

• Stereo audio output (jack type)

AlchemyTV DVR™ User Guide

Page 3

Composite IN

S-Video IN

Audio IN

TV/Antenna

FM Radio

Audio OUT

Composite IN

S-Video IN

Audio IN

TV/Antenna

Audio OUT

Remote Receiver

G4-Only version (no longer in production

Product code: DVRPCI-PALSEC

DVRPCI-NTSC

G4/G5 version

Product code: DVRPCI-SIL

Remote Receiver

• TV/Antenna connection: This connector should be used for your analogue TV cable coming

from an RF antenna or a cable box.

• FM Connector: This connector is available solely with the G4-only version of the

card. It allows you to connect an FM antenna.

• Composite input: Composite is a widely used standard for connecting video

equipment. Note that the quality of this connection is not as good as
S-Video. This type of connector is often found on camcorders and
VCRs.

• S-Video input: This connection gives a better image quality than composite and is

generally found on mid-range camcorders, VCRs and DVD players. If
you intend to capture video from an analogue source, use this
connection whenever you can.

• Stereo audio IN: The AlchemyTV™ card uses a conventional stereo jack plug

• Stereo audio OUT: The AlchemyTV™ card uses a conventional stereo jack plug to

output audio to external speakers. This connector is a pass-through
only and cannot be used as an audio output with other applications.

• Remote receiver: This connector is used to connect the IR receiver for the AlchemyTV

DVR remote control.

AlchemyTV DVR™ User Guide

Page 4

Hardware and Software

Installation

AlchemyTV DVR™ User Guide

Page 5

I. Hardware Installation

The installation of AlchemyTV™ is a two step process starting with the hardware installation into
your PowerMac. AlchemyTV™ is a PCI card that should be installed in a free expansion slot of your
Mac.
Makes sure you are wearing an anti-static wrist wrap before beginning the installation.

PowerMac G4

1. Shut down your Mac and open the side door of your PowerMac. Locate an unused PCI slot.
Using a small Phillips-head screwdriver, remove the retaining screw from the PCI expansion
slots access panel, then remove the access panel itself.

2. Align the connector end of the card with the PCI expansion slot and insert the card. Secure the
card with the screw that you removed in the previous step.

AlchemyTV DVR™ User Guide

Page 6

PowerMac G5

1. Shut down your Mac. Remove the side panel and plastic door of your PowerMac. Locate an
unused PCI slot. Using a small Phillips-head screwdriver, remove the retaining screw from the
PCI expansion slots access panel, then remove the access panel itself.

2. Align the connector end of the card with the PCI expansion slot and insert the card. Secure the
card with the screw that you removed in the previous step.

3. Close the plastic cover and side panel. Start your PowerMac and proceed to the software
installation step.

AlchemyTV DVR™ User Guide

Page 7

Remote Installation:

Connect the remote control receiver cable to the RM port on the AlchemyTV card. Make sure
the plug of the cable rests on the PCI card and not the metalwork of the case.

Note that the infrared remote control has a plastic separator between the battery and the electric
contacts. Remove it to operate the remote.

AlchemyTV DVR™ User Guide

Page 8

II. Software Installation

1. Insert the Installation CD that shipped with your AlchemyTV DVR™ card into your CD/DVD drive.

2. Before installing the version available on the CD, it is recommended that you check any available
updates on the Miglia site. Double-click on the icon named ‘Click here to check if a newer
version is available’ to access the website page.

3. Open the folder AlchemyDVR and double-click on the ‘’Install AlchemyTV DVR™” icon to launch
the installer. Select the startup drive of your choice and click on ‘Install’. Note that you will be
asked for your administrator password when performing the installation.

4. Once the installation process is finished, restart your Mac.

5. If you are using two AlchemyTV cards in your system, you will need to launch the ‘Install
Multiple Card Support’ installation application. An enhanced driver will be installed into your
system folder.

AlchemyTV DVR™ User Guide

Page 9

Note: If you own a FireWire webcam and wish to use iChat AV, install the AlchemyTV ichat patch
located on the first level of the CD. This will avoid error messages in iChat rendering your webcam
unusable. The iChat patch requires Application Enhancer to be installed first. A link to a download
page is provided on the CD.

6. The AlchemyTV DVR folder will be located in the ‘Applications’ folder of the volume containing
your system software.

7. Note that the control panel “Remote Control’ is also added to the System Preferences panel.

If you have installed the Application Enhancer (for the iChat patch), the APE manager will also
appear.

8. The installation log is located in: <Username> / Library / Logs

AlchemyTV DVR™ User Guide

Page 10

Setting up AlchemyTV DVR

for viewing and recording

AlchemyTV DVR™ User Guide

Page 11

Introduction

This chapter will guide you through the initial setup of the AlchemyTV DVR card and software.
Before proceeding, make sure you have installed the PCI card and the software and connected your
video source via the composite or S-Video or coaxial connectors.

I. Serial Number and Registration

1. Launch AlchemyTV DVR located in your Applications folder

2. You will be asked to enter your serial number located on the CD sleeve or the CD itself. Enter
the 32 digits serial number with the dashes as shown below:
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX

II. Setting up AlchemyTV DVR for TV reception

The Setup Assistant will launch automatically on the first startup of the software. You can
access it at anytime via AlchemyTV DVR > Setup Assistant
The AlchemyTV DVR Setup Assistant will guide you through the set up process and create a list
of settings based on your choices and hardware configuration.

1. Start by selecting your country. If your country is not in the list, select the relevant TV standard
via the ‘Other’ option.

AlchemyTV DVR™ User Guide

Page 12

2. The Setup Assistant will ask you to choose the type o f connection you are using.
If you connect your card directly to an antenna or a cable TV outlet, choose the ‘TV Tuner’
option.
If you are subscribing to a premium or digital cable service or digital satellite, it is recommended
that you make a connection via S-Video. This will ensure the best quality possible. Channels will
have to be switched via the remote control of your cable or satellite receiver.
If you are using AlchemyTV DVR for video capture from a VCR, camcorder or DVD player,
choose either composite or S-Video.
Then Click Next

3. Composite or S-Video Connection
If you have selected TV Tuner as the input, please skip to step 6.
Select the audio input based on your connection. You will most likely use the audio in on the
AlchemyTV™ card or built-into your PowerMac.
Click on Next and skip to step 5

AlchemyTV DVR™ User Guide

Page 13

USA residents only

If you have selected TV Tuner as the input connection, the Setup Assistant will ask you to enter
your ZIP code to download the relevant channel naming templates from TVGuide.com. This will
prevent you from having to give names manually to the individual channels.

4. TV Tuner Connection:
Press the ‘Start Scan’ button to start the automatic channel search.
You will be given three options during the channel scan:

Get all Channels: The software will scan and store all channels without interruption until the

process is complete. This option will not allow you to name individual
channels and some channels with poor reception may be stored. Naming
and deleting stations can be performed at a later stage in the preference
menu.

Ignore Channel: When the software finds a channel, it will be displayed in the preview

window leaving you the decision to store or discard it. By clicking ignore,
you skip a channel and enable the scan to continue.

Next Channel: Once a channel is found you can enter a name (this is optional) and press

‘Next Channel to store it and continue the scan. Repeat the operation until
all channels are found. The Assistant automatically moves to the next

5. Once this operation finished, the Setup Assistant will create video compression and display
settings based on the performance of your computer. These settings can be modified at a later
stage by using the Preferences submenu.

6. If you wish to view live TV, you can open the TV window via the View menu.

AlchemyTV DVR™ User Guide

Page 14

Using the AlchemyTV DVR

Menus and Onscreen Remote

AlchemyTV DVR™ User Guide

Page 15