Mightymast Leisure 7ft Revolver Operating Instructions Manual

INSTRUCTIONS FOR THE 7FT REVOLVER 3-IN-1 MULTIGAMES TABLE

Please keep these instructions for future reference. Adult assembly required.

This table is not a toy & is intended for use by or under the

supervision of adults.

Tools required

Philips Screwdriver – not included
Standard (flat head) Screwdriver – not included
Allen Key – included
Note: electric screwdrivers may be helpful during assembly however please set a low torque & use extreme caution.

Assembly Tips

Make sure you understand the following before you begin to assemble your games table.

1. READ THIS MANUAL all the way through before beginning assembly.

2. Some drawings or images in the manual may not look exactly like your product.

3. You will need a second adult to assist with this assembly (ideally 4 adults needed for lifting).

4. Save all packing materials until the parts have been inspected & the table is assembled.

Unpack the pieces

1. Lay the box on a flat surface (the floor). You may want this near your area of assembly.

2. Unpack the boxes & parts bags. Inspect & count the parts. The Parts Identifier page can be used to record your

results.

3. Some parts on the Parts Identifier page are pre-assembled.

4. If any parts are missing please contact Mightymast Leisure immediately.

5. Note that some parts are stored inside the table top.

1