Mier DA-052, DA-052WV Instructions Manual

1500 North Ann Street

Kokomo, IN 46901
800-473-0213 ~ Fax: [phone]
Email: [e-mail]
Website: www.mierproducts.com

DA-052

DA-052

REMOTE WHISTLE INSTALLATION:

1. Unplug Drive-Alert Control Panel

2. Connect the DA-052 or DA-052WV wires as shown below in Diagram “A”

3. Connect the BLUE wire (-) to the Drive-Alert Control Panel’s NEG Terminal

4. Connect the BLACK wire (+) to the Drive-Alert Control Panel’s NO Terminal

5. Whistle Switch must be “ON” at all times (if equipped on the Drive-Alert model you choose)

__________________________________________________________________________________________

REMOTE WHISTLE AND DA-052WV (WITH VOLUME CONTROL) INSTRUCTIONS

Diagram A

1

DA-052 and DA-052WV Remote Whistles’ Kit Limited Warranty:

Mier Products, Inc.’s Limited Warranty Program, for Drive-Alert models and accessories, protects the original
owner for one year from the date of purchase against defects in original parts or workmanship. Mier Products,
Inc. agrees to repair or replace parts (Mier’s option) that are deemed defective by our Quality Control Team,
without charge for parts or labor, if the defective unit is returned prepaid to Mier Products, Inc., Kokomo, IN,
46901, within the one year period.
Close inspection at the time of receipt by the customer will quickly determine product quality. Thus, Mier

Products, Inc. recommends inspection of Drive-Alert models and accessories immediately upon receipt and
contacting Mier Products, Inc. if quality issues arise.
Mier Products, Inc. does not assume responsibility for claims or damages caused by improper installation or use

of these products, accessories, and/or products connected to or stored within them. Mier Products, Inc. does not
assume responsibility for damages to these products or their accessories due to shipping damage or damage
occurring while in a customer’s warehouse and/or possession. Mier Products, Inc. does not assume
responsibility for damage due to accident, faulty wiring, overload of Drive-Alert or Drive-Alert accessory
output, or components attached to the Drive-Alert parts.
Drive-Alert models and accessories must be shipped, handled, stored, and installed with strict adherence to

OEM installation instructions.
This warranty constitutes the entire warranty with respect to Mier’s Drive-Alert Models and Accessories and IS
IN LIEU OF ALL OTHERS, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OR
MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND IN NO
EVENT IS MIER PRODUCTS, INC., OR IT’S OEM PARTNERS, RESPONSIBLE FOR ANY
CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER.
Any warranty OR sales questions should be directed to Mier Products at 800-473-0213, or via e-mail to
[e-mail]
Repair work not covered by this Warranty is available for a nominal charge.

2