How it Works
Miele
Loading...
TXi680WP
Brief operating instructions
2 pgs895.91 Kb1
Operating instructions
100 pgs5.16 Mb0
Operating instructions
96 pgs5.17 Mb1
Specification Sheet
3 pgs1.37 Mb1
Table of contents
Loading...

Miele TXI 680 WP Operating instructions

Download
Operating instructions Heat-pump dryer
It is essential to read these operating instructions before installation or use of this appliance. This prevents both personal injury and damage to the appliance.
en-CA M.-Nr. 11 677 010
Contents
Understanding the care-label symbols .......................................................... 25
Selecting the correct drying level................................................................... 25
Selecting the drying level for programs with a selectable drying level .......... 29
Time-controlled and other programs.............................................................. 29
2
Contents
Removing the fragrance flacon ...................................................................... 49
Removing visible lint....................................................................................... 49
Cleaning the lint filters and air flow openings thoroughly .............................. 50
Removing the plinth filter ............................................................................... 53
Cleaning the plinth filter.................................................................................. 54
Cleaning the plinth filter flap........................................................................... 55
3
Contents
Transporting the tumble dryer to its installation site ...................................... 73
Installation ...................................................................................................... 74
Downtime after installation............................................................................. 74
Ventilation....................................................................................................... 74
Before moving the tumble dryer again ........................................................... 75
Dimensions..................................................................................................... 77
Installation on a plinth .................................................................................... 77
Washer-dryer stack ........................................................................................ 77
Connection adapter for NEMA 14-30 socket................................................. 78
Laying the drain hose ..................................................................................... 79
Condensate drain........................................................................................... 79
Changing the hinging over ............................................................................. 80
Refitting .......................................................................................................... 85
4
Contents
Display............................................................................................................ 90
Buttons active ................................................................................................ 90
Buttons inactive.............................................................................................. 90
Running a RemoteUpdate.............................................................................. 94
5

Caring for the environment

Disposal of the transport packaging material

The packaging material protects the dryer from transport damage. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled.
Recycling the packaging reduces the use of raw materials in the manufacturing process and also the amount of waste.

Disposal of your old appliance

Electronic and electrical appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for the proper functioning and safe use of the equipment. These could be hazardous to your health and to the environment if disposed of with general waste or if handled incorrectly. Therefore, please do not dispose of your old appliance with general waste.
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. Please ensure that your old appliance is kept away from children until removal. Observe safety requirements for appliances that may tip over or pose an entrapment hazard.
6

WARNING AND SAFETY INSTRUCTIONS

WARNING
In order to prevent fire, electric shock or injury to persons during the use of this tumble dryer, you must observe the following vital precautionary measures:
WARNING
This tumble dryer is intended for use in domestic households and similar working and residential environments.
You must read all instructions before using the tumble dryer for
the first time.
Children must not play with, on or inside the tumble dryer.
Children should be supervised in the vicinity of the tumble dryer. Make sure the door of the tumble dryer is always closed in order to avoid endangering children.
If the tumble dryer is no longer in use and you wish to dispose of
it, remove the door.
Do not install or use a dryer with visible damage.Do not touch the drum whilst it is still rotating.Do not store or operate the tumble dryer outdoors.Do not make any alterations to the tumble dryer.Unauthorized repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Do not make any alterations to the tumble dryer, unless authorized to do so by Miele. Repairs should only be carried out by a Miele approved service technician, otherwise there could be a considerable danger to the user.
7
WARNING AND SAFETY INSTRUCTIONS
Important information regarding use of fabric softener sheets:
We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine. Follow the manufacturer's instructions. If you still wish to use fabric softener sheets, be sure to follow the cleaning instructions under “Cleaning and care” in the “Cleaning instructions when using fabric softener sheets” section.
Tip: Using a fragrance capsule (optional accessory) will add a pleasant fragrance to your laundry. When a fragrance capsule is used, the fragrance is absorbed by the entire load of laundry. The disadvantage of fabric softener sheets is that the fragrance is sometimes only absorbed by a few items of laundry, especially when drying a full load.
When you use a fragrance capsule, always follow the warnings in this section as well as those under “Fragrance capsule”.
8
WARNING AND SAFETY INSTRUCTIONS
To prevent the risk of fire, the following items must not be tumble
dried:
- Items which have not been washed.
- Items which have not been thoroughly cleaned and are still soiled with grease, oil or other deposits (such as work clothes, kitchen linens or cosmetics cloths with lubricants, cooking oils, grease, lotions, etc, as there is a danger that they might ignite when heated (chemical reaction), even after they have been removed from the dryer at the end of the program.
- Items which have been washed or dry-cleaned using chemicals or other flammable substances (e.g. professional dry-cleaning agents). They could emit explosive fumes.
- Items that have been soiled with flammable or explosive cleaning agents or substances containing acetone, alcohol, gasoline, petroleum, kerosene, spot removers, turpentine, waxes, wax removers and other chemicals (e.g. mops and floor cloths).
- Items which have been soiled with hair lacquer, hair spray, nail polish remover or similar substances.
When washing such heavily soiled items ensure that you use a larger quantity of detergent and select a high temperature. If in doubt, wash the items several times.
- Items which contain a large proportion of rubber, foam rubber or rubber-like materials. For example, products made from latex foam rubber, shower caps, waterproof textiles, rubberized articles, and items of clothing and pillows with foam rubber filling.
- Items which contain padding or fillings (e.g. pillows, jackets) and are damaged. The filling could fall out and cause a risk of fire.
9
WARNING AND SAFETY INSTRUCTIONS
In many programs, the heating phase is followed by a cooling
down phase to ensure that the items are not too hot to handle when you remove them (this also prevents the danger of the laundry igniting). The program is not finished until after the cooling down phase. It is advisable to remove all laundry as soon as the program has finished.
The lint filters must be cleaned before or after every drying cycle!Keep the room where the tumble dryer is located, particularly the
plinth area, free from dust and lint.
The inside of the tumble dryer must be cleaned regularly by an
authorized specialist.
GROUNDING INSTRUCTIONS
The electrical safety of this dryer can only be guaranteed when continuity is complete between it and an effective grounding system. It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply.
WARNING – If the grounding conductor is connected incorrectly,
this can result in electric shock. Contact a qualified electrician if you are unsure whether the appliance is properly grounded.
10
WARNING AND SAFETY INSTRUCTIONS
Do not change the plug: If it does not fit into the socket, you
should have a proper outlet installed by a qualified electrician.
In the event of a fault or during cleaning and maintenance, the
tumble dryer is only completely disconnected from the electricity supply when the tumble dryer plug has been removed or if the fuse has been disconnected or if the screw-out fuse has been removed. Do not switch on the supply until the task has been completed.
Miele tumble dryers and Miele washing machines can be installed
as a washer-dryer stack. A Miele washer-dryer connection kit is required as an optional accessory for this. Please ensure that the washer-dryer connection kit is suitable for the Miele tumble dryer and the Miele washing machine.
If you order a plinth for this tumble dryer (available from Miele as
an optional accessory), make sure it is the correct one.
The maximum dry laundry weight is 8,0kg.
See the “Program chart” for the maximum recommended loads for individual programs.
Do not place shoes inside the drum for drying. Placing shoes
inside the drum for drying can cause the belt to tear, requiring a service call. You must always use the dryer basket (optional accessory) when drying/airing shoes. Follow the additional operating instructions for the dryer basket.
This tumble dryer is supplied with a special lamp to cope with
particular conditions (e.g. relating to temperature, moisture, chemical resistance, abrasion resistance and vibration). This special lamp must only be used for the purpose for which it is intended. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorized person or by Miele Customer Service.
11
WARNING AND SAFETY INSTRUCTIONS
Heat pump technology and refrigerant:
The heat pump in this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquefied by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place.
Damage to the tumble dryer by switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer, wait for at least one hour before starting a drying program.
- The humming noises caused by the heat pump during the drying process are normal. They do not impair the efficient functioning of the tumble dryer.
- The refrigerant is not flammable or explosive.
- This tumble dryer contains fluorinated greenhouse gases. Hermetically sealed. Designation of refrigerant: R134a Amount of refrigerant: 0,47 kg Global warming potential of refrigerant: 1430 kg CO2 e Global warming potential of appliance: 672 kg CO2 e
This product can contain chemicals known by the state of
California to cause cancer, birth defects and other genetic defects.
12
WARNING AND SAFETY INSTRUCTIONS

Using a fragrance capsule (optional accessory)

Only use genuine Miele original fragrance capsules.The fragrance capsule must be stored in its original packaging so
please make sure you retain this.
Caution: The fragrance can leak out of the capsule! Make sure
that you always keep the capsule or the lint filter with the capsule inserted in it in a horizontal position when carrying, and do not tip or place it down on any surface.
Use an absorbent cloth to wipe up any fragrance which has
leaked out of the capsule onto the floor, the dryer or any dryer components (e.g. the lint filter) immediately.
If fragrance comes in contact with the body: Wash skin
thoroughly with soap and water. Flush eyes with clean water for at least 15minutes. If swallowed, rinse mouth thoroughly with clean water. Seek medical attention if the fragrance comes in contact with the eyes or is swallowed!
Immediately change clothes that have come in contact with the
fragrance. Thoroughly wash clothing or fabric using a large amount of water and detergent.
There is the risk of fire or damage to the tumble dryer if the
following instructions are not observed:
- Never refill a capsule with fragrance.
- Never use a faulty fragrance capsule.
Dispose of an empty fragrance capsule with the household waste
and never use it for any other purpose.
Please also observe the information supplied with the fragrance
capsule.
13
WARNING AND SAFETY INSTRUCTIONS

FCC Declaration of Conformity

This appliance complies with Part 15 of the FCC regulations. This
appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference. The appliances may be interconnected as desired.

FCC Radiation Exposure Statement

This appliance complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. These appliances should be installed and operated with a minimum distance of 8" (20cm) between the radiator and body.

Industry Canada Statement

This digital device does not exceed the Class B limits for radio
noise emissions from digital devices specified in the radio regulations of the Canadian Radio-television and Telecommunications Commission. This appliance complies with the Class B specification of the Canadian ICES-003.

KEEP THESE OPERATING INSTRUCTIONS IN A SAFE PLACE

14

Control panel

Operating the tumble dryer

a
Control field
The control field consists of a display and various sensor buttons. The individual sensor buttons are explained in the following sections.
b
Display
The following values are displayed and/or selected on the display:
1. The program names, the drying level and the duration of the selected program.
2. The individual values of the selection lists for the settings.
c
Sensor buttons 
The values in the display can be changed with the  sensor buttons. The sensor button increases the value or moves the selection list up; the sensor button decreases the value or moves the selection list down.
d
OK sensor button
Confirm the selected values with the OKsensor button.
e
PerfectDry indicator
The PerfectDry indicator will flash after the program has started and go out when the program duration appears in the display. With programs with a selectable drying level, the PerfectDry system calculates the residual moisture present in the laundry to ensure a precise drying result. The PerfectDry indicator will light up again when the selected drying level is reached and remain on until the end of the program. In the Woolens Handcare, Silks
Handcare, Cold Air, Time Dry, Basket programs, the PerfectDry
indicator does not light up at all.
15
Operating the tumble dryer
f
Optical interface
This is used by the Service department as a transmission point.
g
Sensor buttons for extra options
You can select extra options to augment the wash programs. If a drying program has been selected, the sensor buttons for the possible extra options light up dimly.
h
Sensor button You can use the sensor button to call up an energy consumption forecast for the selected drying program.
i
Sensor buttons The sensor button starts the delay start function. With the delay start function, you can delay the start of the program. The start of the program can be delayed from 15minutes up to a maximum of 24hours. This allows you to make use of night-time economy electricity rates, for example. Further information can be found in “4. Selecting program settings”.
j
Start/Add laundry sensor button
Touching the Start/Add laundrysensor button starts a
program. The current program can be interrupted to add laundry. The program can be started when the sensor button is flashing on and off. The sensor button lights up constantly once the program has started.
k
Program selector
For selecting programs and for switching off. The tumble dryer is switched on when you select a program, and switched off by turning the program selector to the position.

Operating the sensor buttons

The sensor buttons react to fingertip contact. Selection is possible as long as the respective sensor button is illuminated.
If a sensor button is brightly lit, this means: currently selected
If a sensor button is dimly lit, this means: selection possible
16
Operating the tumble dryer
OK
Normal 0:55
OK
2:00
OK
Language 
OK
On
OK
:0000
Start in h

Display

The basic display shows the following for a drying level program:
- The selected drying level and the expected program duration
- The drying level reached after the start of the program and the remaining program duration
The basic display shows only the program duration for a time-controlled program:

Appliance operation examples

Scrolling through a list

The scroll bar in the display indicates
that a selection is available.

Identifying the selected option

An activated option in a list will have a check mark next to it.

Setting numerical values

The numerical value is highlighted in white. Touching the sensor button decreases the value and touching the sensor button increases it. The OK sensor button is used to activate the value in the display.

Exiting a sub-menu

Select Back  to exit a sub-menu.
Touching the sensor button scrolls down the list to the next option and touching the sensor button scrolls up the list to the next option. The OK sensor button is used to activate the option in the display.
17

Energy saving tips

OK
       
This dryer with heat pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily.
- Make sure your laundry is spun at the maximum spin speed in the washing machine before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying, e.g., approx. 20% energy can be saved if spun at 1,600rpm instead of 1,000rpm.
- Load according to the optimum amount of laundry recommended for the drying program being used. This will mean that the energy consumption for the amount of laundry is at its most economical.
- Make sure that the room temperature is not too high. If there are other heat­producing appliances in the room in which the dryer is located, make sure the room is well ventilated and switch the other appliances off.

Viewing the estimated energy consumption

You can view information about the energy consumption of your tumble dryer with the sensor button.
After selecting a drying program,
touch the sensor button.
The estimated energy consumption levels will be displayed as a bar chart.
The more bars visible (), the higher the energy consumption.
The estimate will vary depending on the drying program and any extra options selected.
Touch the OK sensor button or wait
until the display automatically returns to the standard display.
- Clean the lint filters in the door opening after every drying cycle.
18

Functioning of the heat-pump dryer

Two separate circuits ensure that the laundry is dried:
Dry air circuit
The drying air flows through a heat exchanger, the drum and several filters. This is ensured by a blower in the dryer.
- The drying air flows through the heat exchanger in the longitudinal direction and is heated in the rear area.
- The drying air is then blown into the drum, where it absorbs the moisture of the laundry.
- The damp drying air is blown back through the heat exchanger via several filters in the fill area and the plinth area of the dryer.
- The drying air cools down in the front, cool area of the heat exchanger and loses its moisture.
- The circuit begins afresh.
Refrigerant circuit
The refrigerant circuit regulates the heating and cooling of the drying air through the heat exchanger. The heat pump is the central component: This is a compressor that is connected to a pipeline system which is filled with refrigerant.
- The pipeline system surrounds the heat exchanger in several bends.
- The compressor draws in the gaseous refrigerant and compresses it, causing the temperature to rise.
- The hot refrigerant is passed through the pipeline system to the rear of the heat exchanger. The heat is released into the drying air, which flows through the heat exchanger.
- The refrigerant liquifies by dissipating the heat.
- The liquid refrigerant then flows through a capillary tube (a very thin tube) to the front area of the heat exchanger. This changes the pressure of the refrigerant.
- The refrigerant cools and reverts to its gaseous state. This in turn cools the front area of the heat exchanger and dehumidifies the drying air.
- The circuit begins anew.
19

Initial commissioning

Downtime after installation

Damage caused by switching the
appliance on too soon. This can damage the heat pump. After setting up the tumble dryer,
wait for at least one hour before starting a drying program.

Removing the protective foil and stickers

Remove:
- any protective film from the door
- any stickers from the front and the lid
Please do not remove any labels (e.g. the data plate) which are visible when you open the door.

Miele@home

Your tumble dryer is equipped with an integrated WiFi module.
To use this feature, you will need:
- a WiFi network
- the Miele@mobile app
- a Miele user account You can create a user account via the Miele@mobile app.
The Miele@mobile app will guide you as you connect your tumble dryer to your home WiFi network.
Once your dryer is connected to your WiFi network, you can use the app to carry out various activities, such as:
- controlling your tumble dryer remotely
- calling up information on the operating status of your tumble dryer
- calling up information on the program sequence of your tumble dryer
20
Connecting your tumble dryer to your WiFi network will increase energy consumption, even when the tumble dryer is switched off.
Before installing the dryer in its final location, ensure the signal strength is sufficient for your WiFi network.

Availability of the WiFi connection

The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This may result in sporadic or even complete connection failures. Therefore, the availability of featured functions cannot always be guaranteed.

Miele@home availability

The ability to use the Miele app depends on the availability of the Miele@home service in your country.
The Miele@home service is not available in every country.
For information about availability, please visit www.miele.com.

Miele app

The Miele App is available to download free of charge from the Apple App
Store® or from the Google Play™ store.
Initial commissioning
21
Initial commissioning
OK
english (US)
OK
Set up now

Switching on the tumble dryer

Turn the program selector to the
Normal program.
The welcome tone will sound and the welcome screen will light up.

Setting the display language

You will be asked to select the language you require for the display. It is possible to change the language at any time by setting the program selector to the More Programs/ position in the
Settings  sub-menu.
Touch the sensor button until the
language you want appears in the display.
Confirm your language selection by
touching the OK button.

Setting up Miele@home

The following message appears in the display: Miele@home
Touch the OKsensor button.
22
To set up Miele@home now:
Touch the OK sensor button.
To postpone setup until later:
Touch the sensor button until Set
up later appears in the display and
press the OK sensor button to confirm.
The following selection options appear in the display:
1. Connect via WPS
2. Connect via App Select the required connection type.
Initial commissioning
OK
Connection OK
You will then be guided by the display and the Miele@mobile app.
Before installing the dryer in its final location, ensure the signal strength is sufficient for your WiFi network.
If the connection is successful, the following will appear in the display:
Confirm with the OK sensor button
You will require a WPS-compatible router for the Connect via
WPSconnection type.
Activate the WPS function on your
router within 2minutes.

Continuing with commissioning

Confirm with the OKsensor button.Please see “1. Notes on correct
laundry care”.
You can then select a program and
load the tumble dryer as described in “2. Selecting a program” and ”3. Loading the tumble dryer”.
The procedure for initial commissioning is completed when a program lasting longer than one hour has been carried out in full.
23

1. Notes on correct laundry care

Points to note regarding washed laundry

- When washing very heavily soiled items, ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times.
- Do not load the drum with items that are still soaking wet. Make sure your laundry is spun at the maximum spin speed before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.
- New dark-coloured garments should be washed and dried separately from light-coloured garments. There is the risk of colours running and discolouring other garments or even plastic components in the dryer. Dark coloured fibres can also settle on light coloured garments and vice versa.
- Starched laundry can be tumble dried. To achieve the usual finish, double the amount of starch should be used.

Preparing the laundry before drying

Damage due to foreign objects
which were not removed from the laundry.
Foreign objects can melt, burn, or explode.
Ensure that any foreign objects (e.g., detergent dispensing balls, lighters, etc.) have been removed from the laundry.
Risk of fire due to incorrect use
and operation. The laundry can burn and destroy
the tumble dryer and the surroundings.
See “WARNING AND SAFETY INSTRUCTIONS” for further information.
- Sort the laundry according to the type of fibre and weave, size, garment care label symbol, and the drying level required.
- Check seams and stitching to ensure that padding and linings are intact. This way you will avoid the danger of fillings coming out. These could catch fire when being dried.
- Untangle the laundry.
- Tie together textile belts and apron ties.
- Fasten duvet covers and pillow cases to prevent small items from becoming rolled up inside them.
- Fasten hooks and eyes.
- Leave jackets open and undo any long zippers so that textiles dry evenly.
- Sew in or remove underwiring from bras.
- If necessary, reduce the size of the load for these types of fabric. Wrinkle-free fabric tends to crease more, the larger the load. This is particularly the case for garments made from very fine weave fabric, such as dress shirts or blouses.
24
1. Notes on correct laundry care

Drying

Useful tip: See the “Program chart”.
This describes the programs and gives their maximum load.
- Always observe the maximum recommended load for each program. This will mean that the energy consumption for the amount of laundry is at its most economical.
- Down-filled garments have linings which have a tendency to shrink, depending on the quality of the item. Only use the SoftSteam program for these items.
- You should only tumble dry pure linen if it is specified as suitable by the manufacturer on the care label, as the surface of the fabric may otherwise become rough. Only use the SoftSteam program for these items.
- Woolens and wool blends tend to become matted and shrink if tumble dried. Only use the Woolens Handcare program for these items.
- Jersey fabrics (e.g. T-shirts, underwear) tend to shrink when they are washed for the first time. Therefore, do not over-dry the fabrics to prevent them from shrinking further. Buy jersey fabrics that are one or two sizes bigger.

Understanding the care-label symbols

Drying
Normal/higher temperature
Low temperature*
*Select Gentle
Do not tumble dry
Ironing
Very hot
Warm

Selecting the correct drying level

- Extra dry for hard-wearing and very thick fabrics.
- Normal plus if you want to fold the laundry after drying and put it in the closet.
- Normal for textiles that can shrink. Or for light cotton or jersey textiles.
- Slightly dry for particularly delicate garments that you wish to line dry afterwards.
- Hand iron/ or Machine iron if you want to iron the laundry after drying.
Hot
Do not iron
- Select the Gentle extra option for fabric which is particularly heat­sensitive or susceptible to creasing.
25

2. Selecting a program

Switching on the tumble dryer

The tumble dryer is switched on when you select a program, and switched off by turning the program selector to the position.
Turn the program selector to a
program.
When a program is selected, the program name and the maximum load (weight of dry laundry) possible for the program will appear in the display for a few seconds.

Selecting a program

There are three possible ways to select a program.

1. Selecting standard programs with the program selector

Turn the program selector to the
required program.
The selected program will be shown in the display. This will then be replaced by the standard display.
26
Important: When selecting the
Soft Steam program, you must make sure that the condensed water container has been filled as described in these operating instructions (see “Cleaning and care”).
2. Selecting a program
OK
Time Dry
2. Selecting programs via the “More
programs/” setting and the display
Turn the program selector.
You can select the program you want via the display.
Touch the sensor buttons until
the program you want appears in the display.
3. Selecting programs via the MobileStartprogram selector position and the Miele@mobile app
Useful tip: In order to use
MobileStart, the tumble dryer must be logged on to the WiFi network and
Remote control must be switched on.
Turn the program selector.Follow the instructions in the display.Touch the Start/Add laundry sensor
button.
Confirm the program with the OK
sensor button.
The selected program will be shown in the display. This will then be replaced by the standard display.
Important: When selecting the
Soft Steam program, you must make sure that the condensed water container has been filled as described in these operating instructions (see “Cleaning and care”).
The dryer can now be operated via a mobile device together with the Miele@mobile app.
27

3. Loading the tumble dryer

Loading the laundry

Textiles may be damaged. Before loading, read “1. Notes on
correct laundry care”.
Unfold the laundry and load loosely
into the drum.
Do not overload the drum. Overloading can cause unnecessary wear and tear to the laundry, give a disappointing drying result, and cause more creasing.

2 sockets for inserting fragrance capsules

The “Fragrance capsule” chapter describes how to use the fragrance capsule.
If you are not using a fragrance capsule: push the tab down completely (see arrow) so that the socket is closed. Otherwise, lint will accumulate here.

Closing the door

This can result in damage to the laundry.
When closing the door, make sure that laundry does not get trapped in the door opening.
28
Shut the door with a gentle swing.

4. Selecting program settings

OK
Normal 0:55
OK
2:00

Program settings

Selecting the drying level for programs with a selectable drying level

Normal, Delicates, Bed Linens, Dress Shirts, Denims, SoftSteam, Express, Outdoor, Table Linens/Drapes, Smoothing, Wrinkle-free, Sportswear
The preset drying level can be changed if required.
Touch the or sensor buttons to
select a drying level.
Not all drying levels are suitable for use with every program. The range is limited for certain programs.
When selecting the SoftSteam program, you must make sure that the condensed water container has been filled as described in these operating instructions (see “Condensed water container”).

Time-controlled and other programs

Time Dry, Cold Air, Basket, DryFresh
You can change the duration in 10­minute increments.
Cold Air: 20min – 1:00h Time Dry: 20min – 2:00h Basket: 40min – 2:30h DryFresh: 1:00–2:00h
Touch the or sensor buttons to
select a duration.
Woolens/Silks, Pillows, Proofing
The drying result is preset by the dryer and cannot be altered.
29
Loading...
+ 67 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use