Miele G5505SCi User Manual

Product and Cut-out Dimensions Page 1 o f 3

Dimension G 5505

SCi

Integrated Dishwasher

Location Codes
C - Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.

Adjust according to water and drain location.

D - 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E - 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be

hardwired.

W - 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.

Notes

All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 o f 3

Dimension G 5505

SCi

Integrated Dishwasher

Width:

23 7/16 (598 mm) in all cases

Note:

Control panel height is determined by the

Maximum panel weight:

Pounds (10.4 kg)

Custom Panel Installations

Some Miele dishwashers do not come equipped with a front panel. These dishwashers are designed to accept a
custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the
dishwasher to align with the surrounding cabinets.

”

Thickness: ¾” (19 mm) in all cases
Height: Determined using the following

calculation:

Panel Height = HTC – CPH – TKH

Miele Integrated

Dishwasher

GDU Kit Installations

Miele offers pre-fabricated panels for all integrated units called GDU kits. These panels are designed for various
toe-kick heights and include a black plastic toe kick cover.

HTC = Height to the underside of countertop
CPH = Control panel height (Note 1)
TKH = Toe kick height

height of the adjoining drawers in the cabinets.
The height is adjustable between 4 5/8” and 5
7/8” (116-150 mm) with spacer strips provided.

Maximum panel height: 27 1/4” (692 mm)
Minimum panel height: 21 1/4” (540 mm)

23

GDU 60/65-1 4” Toekick GDU 60/60-1 6” Toekick

This GDU accepts a
custom insert:
Height: 25 11/16” (650 mm)
Width 23 1/8” (587 mm)
Thick 1/8” (3 mm)

This GDU accepts a
custom insert:
Height: 23 5/8” (600 mm)
Width 23 1/8” (587 mm)
Thick 1/8” (3 mm)

Exposed toe-kick

Drawing is not to scale Specification Sheets OJS 11012011

Exposed toe-kick