Classic Plus
Fully Integrated Dishwasher
CLASSIC PLUS G 4976 Vi, G 4976 Vi SF, G 4976 SCVi, G 4976 SCVi SF
Specification Sheets TRS 02282017
8mieleusa.com
Classic Plus
Fully Integrated Dishwasher
SPECIFICATIONS
Overall Unit Width 23
Overall Unit Height 33
Overall Unit Depth 22
Niche
Minimum Cabinet Opening Width
Minimum Cabinet Opening Height 33
Minimum Cabinet Opening Depth 22
Plumbing
Water Supply Requirements
Water Connection Line
Drain Hose 4’ 11” (1.5m) flexible drain hose is supplied.
Electrical
Electrical Requirements - Volts/Amps 110V / 120V, 60Hz, 15 Amps
Power Cord - Plug and length
Shipping
Shipping Weight 118 lbs (53.5kg)
Support
Call Miele 800.843.7231
Miele Website
20/20 Link
9
/16” (598mm)
11
/16” - 361/4” (855 - 920mm)
7
/16” (570mm)
5
/8 ” (600mm)
23
3
/4” (857mm)
7
/16” (570mm)
May be connected to a cold or hot water
supply up to a maximum of 140°F/60°C.
Must be connected to a shut-off valve with
a male 3/8” compression. The water shut-off
valve must be accessible after installation.
The water pressure must be between 4.35
psi (0.3 bar) and may not exceed 145 psi (10
bar). If the pressure is higher than 145 psi
(10 bar), a pressure reducing valve must be
installed.
4’ 11” (1.5m) flexible water intake hose is
supplied with a 3/8 compression connection.
NEMA 5-15 plug, 3’ 11” (1.2m)
(Measured from back of unit, Convertible to
Hardwire)
8www.mieleusa.com
82020technologies.com
Fully Integrated Dishwasher
Classic Plus
Page 2 of 5
Specification Sheets TRS 02282017
Classic Plus
Fully Integrated Dishwasher
INSTALLATION SPECIFICATIONS
Drain - 4 ft 11 in (1.5 m) exible drain hose.
(Connects from lower center rear)
Water - 4 ft 11 in (1.5 m) exible water intake hose with 3/8” compression tting.
(Connects from lower center rear)
Electric - 4 ft 11 in (1.5 m) 120V 15 A 3 wire molded NEMA 5-15 plug power
supply. (Connects via Front End Supply or may be hardwired)
Fully Integrated Dishwasher
Specification Sheets TRS 02282017
Classic Plus
Page 3 of 5
Classic Plus
Fully Integrated Dishwasher
Custom Panel Istallation
For Knock2open (K2o) models, an additional kit is required for use with stainless steel panel. Please contact
Miele for further details.
Fully Integrated Dishwasher
Specification Sheets TRS 02282017
Classic Plus
Page 4 of 5
Classic Plus
Fully Integrated Dishwasher
Acceptable Height Istallation
Fully Integrated Dishwasher
Specification Sheets TRS 02282017
Classic Plus
Page 5 of 5
Loading...