This appliance is intended for
residential use only. Only use the
appliance for its intended purpose.
Improper use of the appliance can
lead to personal injury and material
damage. The manufacturer cannot
be held responsible for damages
caused by improper use of the plate
warmer.
This appliance complies with current
safety requirements.
Read all instructions before installing
or using for the first time.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Read all operating and installation
instructions for any other appliance
installed in combination with the
plate warmer.
Technical safety
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond in order to avoid risk
of damage to the appliance. If in doubt,
consult a qualified technician.
The electrical safety of this
appliance can only be guaranteed
when continuity exists between the
appliance and an effective grounding
system. The grounding system must
comply with local and national safety
regulations. It is imperative that this
basic safety requirement be tested by a
qualified electrician. The manufacturer
cannot be held responsible for the
damages caused by an inadequate
grounding system (e.g. electric shock).
Do not connect the appliance to
the electrical supply with an
extension cord. Extension cords do not
guarantee the required safety of the
appliance.
READ ALL INSTRUCTIONS!
This appliance must only be used
once it has been properly installed
into cabinetry to ensure that all
electrical components are protected.
Never open the outer casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
dangerous and may cause machine
damage.
3
IMPORTANT SAFETY INSTRUCTIONS
Installation, repair and
maintenance work should be
performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
Before installation or service,
disconnect the power supply to the
work area by removing the fuse,
"tripping" the circuit breaker or
unplugging the unit. Pull the plug not
the cord.
Use
The plate warmer interior gets very
hot when in use and stays hot for a
while once turned off.
Use heat-resistant pot holders
when removing dishes. Be sure
that they are not damp or wet. Danger
of steam burns!
Pull the drawer out all the way
when removing dishes to avoid
touching hot drawer parts.
Do not let children access the
appliance or its controls. Supervise
its use by the elderly or infirm.
Do not use the plate warmer to
reheat, cook or keep food and
drinks warm. The condensation from
food or drinks could lead to moisture
damage in the appliance.
Do not lean or sit on the warming
drawer. This will damage the
drawer which can hold a maximum of
33 lbs (15 kg).
Do not store anything in the
warming drawer. Forgotten items
could melt or catch fire when the
appliance is turned on. Flammable
liquids and materials should never be
stored in, above or under the plate
warmer.
Do not use the plate warmer to
heat the room. Due to the high
temperatures radiated, objects left near
the appliance could catch fire.
Do not use a steam cleaner to
clean this appliance. Steam could
penetrate electrical components and
cause a short circuit. Pressurized
steam may cause permanent damage
to the surface and to components of
the appliance, for which the
manufacturer cannot accept
responsibility.
4
a Temperature selector
Guide to the machine
b On/Off button
c Sticker
d Indicator
e Warming drawer
f Non-slip mat
5
Before using the plate warmer
Clean the plate warmer with a damp
^
cloth and wipe dry.
Heat the empty plate warmer for a
^
minimum of 2 hours. Turn the
temperature selector to "Maximum"
(see "Selecting a temperature").
Vent the room when heating the
^
drawer for the first time.
Metal components have a protective
coating which may give off a slight odor
the first time your new appliance is
heated. The smell will dissipate after a
short time and does not indicate a
faulty connection.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.