Midwest Equipment Manufacturing Trac Vac 655-IC, Trac Vac 655-PRO, Trac Vac 655-R, Trac Vac 655-H Operating And Assembly Manual

07-02-14

Model 655-IC/PRO/H/R

Operating and

Assembly

Manual

Midwest Equipment Manufacturing, Inc.

5225 Serum Plant Road

Thorntown, IN 46071

1

SAFETY RULES

Remember, any power equipment can cause injury if operated improperly or if the user does not understand

how to operate the equipment. Exercise caution at all times when using power equipment.

This symbol means Attention!!!!! It is used to point out safety precautions.

▪ Read and follow all instructions in this manual before assembly or operation of this equipment.
Failure to comply with these instructions may result in personal injury. Keep this manual for future
reference and for ordering replacement parts.
▪ Read this instruction manual carefully. Become familiar with the controls and proper use of this
equipment.
▪ Read the engine owners manual and safe operation rules before using this equipment.
▪ Never allow children less than 16 years of age to operate the Trac-Vac. Children 16 years
and older should operate only under close parental supervision.
▪ Do not allow anyone to operate this equipment without proper instruction.
▪ Do not allow passengers to ride on the Trac-Vac or on the towing vehicle.
▪ Keep children and pets out of area of operation.
▪ Check fuel before starting engine. Do Not fill fuel tank indoors, or while engine is running or hot.
Wipe off any spilled fuel before starting engine.
▪ Engine and muffler get HOT! Do Not touch! Keep debris from accumulating on or around engine
and muffler to avoid fire hazard.
▪ Allow engine to cool before storing in any enclosed area. Never store Trac-Vac with fuel in tank.
▪ Do not operate engine if air cleaner or cover is removed, except for adjustments. Removal of the part
could create a fire hazard.

▪ Keep hands, feet, face, long hair and clothing out of inlet and discharge areas. There are ROTATING

BLADES inside these openings.

▪ Make certain that all moving parts come to a complete stop before cleaning, repairing or inspection.
Disconnect spark plug wire and keep away from plug to prevent accidental starting.

▪ If Trac-Vac should become clogged with debris, SHUT OFF ALL ENGINES and wait until impeller
comes to a complete stop before attempting to remove obstruction. Disconnect spark plug wire to
prevent accidental starting.
▪ If excessive vibration occurs while operating your Trac-Vac, stop the engine immediately, disconnect
the spark plug wire and allow all moving parts to stop completely before taking the following steps.
A. Inspect for damage.
B. Repair or replace any damaged parts.
C. Check for loose parts and tighten to assure continued safe operation.
▪ Check all hardware periodically to insure safe operation.
▪ Check cart cover periodically for wear and replace if worn or damaged.
▪ Never operate Trac-Vac without intake hose and exhaust hose attached in proper place.
▪ Do Not remove exhaust hose or attempt to empty contents of container while engine in running.
▪ Keep all shields and guards in place and securely attached.
▪ Always wear eye protection (safety glasses or goggles) when operating this equipment.
▪ Do Not stand behind unit in exhaust discharge area while engine is running.
▪ Do Not operate this equipment while intoxicated or while taking medications that could impair
reactions or senses.
▪ Operate this equipment at reduced ground speed on rough terrain, along creeks and ditches and on
slopes to prevent tipping or loss of control.
▪ Vehicle stability and braking are affected by the addition of this unit. Do not fill the Trac-Vac to its
full capacity without checking the capability of the towing vehicle to safely pull and stop with the unit
attached.
▪ Do Not operate on slopes in excess of 10 degrees. STAY OFF OF STEEP SLOPES!
▪ Follow the maintenance instructions outlined in this manual.

2

Model 655-IC/PRO/H Trac-Vac Parts List

Key Part No. Description Key Part No. Description

1 65510 Frame, 655 33 45101 6" Metal Hose Clamp

2 47014 Frame, 470-FD 34 85226 Bent Pin. 5/8"
3 56510-1 Frame, 565-RH 35 66230 Exhaust Hose, 662
86510-1 Frame, 865 (9HP Robin) 36 86115 Muffler Deflector (Briggs
4 47020 Vertical Upright 5.5 & 6.5 HP
5 56021 Engine, 5.5HP Briggs Intek I/C 560221 Muffler Deflector, Honda
56018 Intek, 6.5HP Intek Pro, 5.5HP
56022 5.5HP Honda 37 1101301 Hairpin Cotter, ½”
86028 9HP Robin (Subaru) 38 1101302 Hairpin Cotter, 1”
6 56030 Turbine Housing (5.5HP Briggs, Honda) 41 6250152 Caster Bolt, 5/8” x 6 ½”
46242 Turbine Housing (6.5HP Briggs) 42 6251101 Caster Nut, 5/8” Nylon Insert
7 56040 Turbine, 5HP (5.5 Briggs, Honda) 43 6250800 Caster Washer
46253 Turbine, 6.5HP Briggs Pro 44 3120518 Eyebolt, 5/16 x 2 ¼”
8 18050 Inlet, 8" (5.5HP Briggs, Honda) 45 3122501 Grease Zerk, 5/16”
66010 Inlet, 8" 6.5 Briggs 47 11100 Hairpin Cotter
9 18119 Hose Clamp, 8" 48 3120612 Housing Bolt
10 86101 Hose, 8" x 60" 3120608 Housing Bolt, (Honda only)
11 47018 Container Holder, 470 49 3120608 Turbine Bolt
12 46217 Top Support 3170110 Turbine Bolt (6.5 Briggs Pro only)
13 46227 Filter Support, Double Top 50 56107 Turbine Washer
14 46228 Filter, Open Mesh 51 3750238 Turbine Set Screw
15 66238 Exhaust Boot, 662 52 1871714 Key Stock
16 46248 Filter Shield 53 3120801 Turbine Lock Washer (Honda)
17 28014 Handle 3750801 Turbine Lock Washer (6.5 Briggs
18 68222 Double Molded Top Pro)
19 46219 Seal, Molded Top 54 56052 Connector Clip, Exhaust Hose
20 46235 Container Latch 55 ***-8 Discharge Chute (tractor specific)
21 46210 Container, 44 Gallon 56 656** Hitch Kit (tractor specific)
22 48038 Spring 57 58075 Engine Guard
23 56115 Nylon Spacer 45133 Decal, Warning Stop Engine
24 46218 Clevis Pin, Vertical Support 45131 Decal, 2 x 8 Trac-Vac Clear
25 47019 Bushing, 470 45130 Decal, 3 x 12 Trac-Vac Clear
26 65032 Bearing, 1" Nylon 48096 Decal, Danger
27 65513 Wheel, 13" x 5.00-6
28 65511 Caster Yoke Assembly
29 65514 1" Collar Clamp
30 58058 Cover, Collar Clamp
31 65512 Stand Optional Accessories
32 28801 Clevis Pin, 1" x 4" 190 6" Remote Pickup Assembly
for 8" Hose