Midwest MW-P6716S, MW-P6716L, MW-P6716R, MW-P6716B, MW-SSP6716L Booklet

Regular Models

You’ll feel the difference!

Midwest Snips® forged blade regular model aviation snips are the world’s best!

We offer four different blade pattern models and two blade hardness options in

this product category as well as two tradesmen sets. These models perform

superior to ASME Performance Requirements.

Cuts “Pinch-Thru-Point”

Precision cuts completely to blade tip end
which reduces cutting strokes and enables
complete and accurate trim cuts.

Requires Less Hand Force
& Stays In Adjustment

Blade pivot bolt is threaded into bottom
blade keeping blades in adjustment for
ease of operation.

Securely Latches Closed

Latch keeps blades safely closed when
not in use.

Longest Lasting Cutting Edge

Blades are hot drop-forged of molybdenum
alloy steel and austemper heat-treated.

07

Strongest Blades

Hot drop-forged process uses grain struc­ture of steel to produce maximum strength.

Optimum Serrations

Blades are serrated 40 serrations per inch to
grip material without scarring.

Highest Quality Components

Grade 8 blade pivot bolt and heavy-duty
double-overwind spring are unconditionally

guaranteed!

Compound Leverage

Multiplies handle force to cutting blades

by 8 : 1 power ratio.

Strongest Handles

High tensile strength steel will not bend
from hand pressure and provides most
efficient conversion of hand force to
cutting power.

Comfortable Handle Grips

Thick textured Santoprene® grips comfort
user’s hand and prevent steel handles from
wearing through.

18ga.

CR STEEL

MW-P6716S MW-P6716L MW-P6716R MW-P6716B

18ga.

CR STEEL

18ga.

CR STEEL

16ga.

CR STEEL

FORGED BLADE STANDARD MODELS

Standard Models are versatile and can be used to cut a wide range of sheet materials

including sheet metal, vinyl, plastic, rubber, screening, canvas, cloth, cardboard, etc.

METAL

MW-P6716S Straight Aviation Snip

Cuts straight and wide curves to the left and

right. Use in either hand. Serrated blades.
Meets ASME Standard B107.500-2010(B107.16).

MW-P6716L Left Aviation Snip

Cuts straight and left curves. Easiest used in

right hand. Serrated blades. Meets ASME
Standard B107.500-2010(B107.16).

MW-P6716C Two-piece Set

Includes left and right standard models.

FORGED BLADE
SPECIAL HARDNESS MODELS

Special Hardness Models are recommended for
cutting extremely hard sheet materials such as
stainless steel, inconel, titanium, etc.

MW-P6716R Right Aviation Snip

Cuts straight and right curves. Easiest used in

left hand. Serrated blades. Meets ASME
Standard B107.500-2010(B107.16).

MW-P6716B Bulldog Aviation Snip

Cuts straight. Use in either hand to cut thick materials,
multiple layers of materials, seams, etc. Serrated blades.
Meets ASME Standard B107.500-2010(B107.16).

MW-P6716RLS Three-piece Set

Includes left, right and straight standard models.

22ga.

STAINLESS

22ga.

STAINLESS

MW-SSP6716L Special Hardness Left Aviation Snip

Cuts straight and left curves. Use to cut hardened metals.

Easiest used in right hand. Serrated blades.

MW-SSP6716R Special Hardness Right Aviation Snip

Cuts straight and right curves. Use to cut hardened metals.

Easiest used in left hand. Serrated blades.

MW-SSP6716L MW-SSP6716R

08