MIDWAY Touch Master Infinity Anti-tip Device User Guide

FEBRUARY 2000

16-11089

Anti-Tip Device Installation Instructions

To ensure that your Touchmaster Infinity upright cabinet is UL-compliant, you must
install the provided anti-tip device.

Materials supplied (in coin vault

)

[ ] anti-tip plate (1) [ ] #8 screws (6)
[ ] leg leveler (1) [ ] 3/8-16 leg leveler nut (1)

INSTALLATION

Before you begin, verify the operation of
the existing game before making any
changes to the cabinet.

Switch off power to the game and
disconnect the line cord from the A.C.
power. Clear the work area and gently
lower the game onto its side.

Center the anti-tip plate on the bottom
edge of the back of the cabinet and attach
the plate with the provided self-tapping
screws. Install the leg leveler, making
sure it is raised above the level of the
other levelers on the cabinet.

Stand the cabinet upright and return the
game to its proper location. Lower the leg
leveler on the anti-tip plate to the floor and
tighten the nut against the anti-tip plate.
Reconnect the line cord to the A.C.
power. Switch on power to the game, and
verify proper operation.

4108-01219-11

08-8178

04-13030

4422-01117-00

Midway Amusement Games, LLC 3401 North California Avenue Chicago, Illinois 60618 USA