Midea WQP6-3305E Service Manual

Technical Service Guide
Compact Dishwasher 6 settings
MODEL SERIES:
WQP6-3305E
IMPORTANT SAFETY NOTICE
WARNING
To avoid personal injury, disconnect power before servicing this product. If electrical power is required for diagnosis or test purposes, disconnect the power immediately after performing the necessary checks.
RECONNECT ALL GROUNDING DEVICES
If grounding wires, screws, straps, clips, nuts, or washers used to complete a path to ground are removed for service, they must be returned to their original position and properly fastened.
MIDEA CONSUMER PRODUCTS
T
ECHNICAL SERVICE GUIDE
COPYRIGHT.
2003
A
LL RIGHTS RESERVED. THIS SERVICE GUIDE MAY NOT BE REPRODUCED IN WHOLE OR IN PART, IN ANY FORM, WITHOUT
WRITTEN PERMISSION FROM THE MIDEA DISHWASHER MANUFACTURING
COMPANY.
CONTENTS
Introduction.............................................................................................................................................................3
Specification...........................................................................................................................................................3
Control Panel Features............................................................................................................................... ..........3
Component Locator Views...................................................................................................................................3
Dishwasher Components.....................................................................................................................................5
Main control board............................................................................................................................... ..........5
Outer Door......................................................................................................................................................6
Dispenser............................................................................................................................... .........................7
Door Handle Assembly.................................................................................................................................8
Microswitch (door handle assembly)..........................................................................................................9
Inner Door.......................................................................................................................................................9
Shell.................................................................................................................................................................9
Operating board...........................................................................................................................................10
Air Breather Assembly................................................................................................................................11
Siphon...........................................................................................................................................................
11
Pressure switch............................................................................................................................................12
Tank assembly.............................................................................................................................................12
Sump assembly............................................................................................................................................14
Drain pump assembly.................................................................................................................................16
Motor pump assembly.................................................................................................................................17
Heater elements assembly.........................................................................................................................17
Heater elements support assembly..........................................................................................................18
Thermal resistor...........................................................................................................................................18
Check plate...................................................................................................................................................18
Flowmeter.....................................................................................................................................................19
Inlet valve......................................................................................................................................................19
Floater assembly..........................................................................................................................................20
Microswitch (floater assembly)..................................................................................................................20
Water softener..............................................................................................................................................20
Troubleshooting......................................................................................................................................................22
Explodedview............................................................................................................................................................
WQP6-3305E compact electrical dishwasher with 6 washing cycles offers good washing performance to satisfy every washing requirement. Its electronic control is easy and convenient to operate. The rack can hold up to 6 sets of dishes. The size (width * depth * height: 550mm * 500mm * 436mm) can easily fit in any corner of the kitchen, and it’s recommended to locate at which the water hose connection is accessible.
Rating voltage: 220~240V / 50Hz Heater elements: 1200W Water pressure: 0.04~1.0MPa Water temperature: Colder water Capacity: 6 settings
1
Power button / indicator light: Press the button to turn on / off the
power supply, at the same time, the indicator light will be on / off.
2
Program button / indicator lights: Press the button to select one of
programs, at the same time, selected program indicator light will be on.
3
Delay button: Press the button to delay start the dishwasher in a delay
time.
4
Salt warning indicator lights: The salt warning indicator light will be on when the softener needs to be refilled Rinse-aid warning indicator light: and the rinse-aid warning indicator
light will be on when the rinse-aid dispenser needs to be refilled.
Note: all models have different control panel features and appearances. All detail can be
referred to user manuals of the model.
FrontView
Part Name: 1 – shell 2 – aesthetic panel 3 – washboard
Component Locator Views
Control Panel Features
Specification
Introduction
1
2
3
1
2
4
3
InteriorView(withbasket)
Part Name: 1 – cutlery basket 2 – basket 3 – dispenser
InteriorView(WithBasketRemoved)
Part Name: 1 – Nut of air breather 2 – Nut of siphon 3 – Cover of softener
4 – Sprayer 5 – Filter S ystem
BackView
1
2
3
1
2
3
4
5
Part Name: 1 – Backboard 2 – Hollow plate 3 – Bottom board 4 – Power cord
Note: Throughout this manual, features and appearance may vary from your model. WARNING: Always turn off the electric power supply before servicing any electrical component,
making ohmmeter checks, or replacing any parts.
Note: All voltage checks should be made with a voltmeter having a full scale range of 250 volts
or higher. After service is completed, be sure all safety grounding circuits are complete, all electrical connections are secure, and all access panels are in place.
The main control board controls all electrical elements in the dishwasher machine. It located in the protecting box in the bottom of dishwasher machine. And it easy is replaced when it cannot work.
Removal and Replacement
1. Disconnect power supply.
2. Take off cutlery basket, basket and filter system.
3. Turn the dishwasher machine. And remove all screw for fixing cover of protecting box.
Part Name: 1 – cover of protecting box
4. Pull out all housings and terminals (including some locking terminals), then remove all screws for fixing main control board.
Main control board
Dishwasher Components
1
1
2
3
4
Drain Hose connecter
Inlet Hose Connecter
Screw
Part name: 1 – protecting box 2 – main control board
Note: mark all housings and terminals’ positions and colors before pulling out them.
Note: some terminals are locking terminals.
5. Reverse the above procedure to install. And check out all connectors connect s well.
The outer door covers the door to the dishwasher and protects the detergent dispenser.
Removal and Installation
1. Open the door of dishwasher. And remove all screws for fixing outer door assembly.
2. Hold on outer door assembly. Remove all screws for fixing the operating board.
Part Name: 1 – outer door 2 – handle cover 3 – operating board
Caution: Inner door of edges are sharp. Some corners and edges of parts are sharp.
3. Remove all screws for fixing handle cover.
4. Reverse the above procedure to install. And check out all connectors connect s well.
Outer Doo
r
1
2
3
Screws
Screws
Screws
Screws
Screws
1
2
FrontView(withouterdoorassemblyremoved)
Part Name: 1 – door handle assembly 2 – microswitch (Door handle assembly)
3 – dispenser 4 –door hinge (right) 5 – Rod for door hinges 6 – door hinge (left) 7 – operating board
The dispenser automatically dispenses both the detergent and the rinse agent at the appropriate times. The dispenser is activated twice during a wash cycle.
The first time, the dispenser is activated, the lever slides up the right-hand path of the connecting rod. This action moves the cover catch and releases the detergent cover. When deactivated, the lever resets to rest under the notch in the center of the
connecting rod. When activated for the second time in a cycle, the lever lifts the connecting rod by the notch, lifting the rinse dispenser plunger and releasing the rinse agent. When
deactivated, the lever returns to its original starting position. The magnetic sensor is connected to rinse aid warning light at control panel by wires. When the indicator lights up, it should add more rinse aid.
Part Name: 1 – cover catch 2 – detergent power compartment
3 – cover 4 –sight glass 5 – rinse agent cap 6 – detergent tablet compartment
Dispenser
5
1
2
3
4
6
7
5
1
2
3
4
6
Loading...
+ 16 hidden pages