The de si gn and specific at ions are subject to c hange without pri or notice
for pr od uct improveme nt . Consult with the sa les agency or manuf acturer
for de ta ils.
AIR CONDITIONER
REMOTE CONTROLLER ILLUSTRATION
Than k yo u very much for pur ch asing our air condi tioner.
Plea se r ead this owner' s ma nual carefully be fore using
your a ir c onditioner.
CONTENTS
Remote controller Specifications...................................................
Operation of buttons ............ .........................................................
Indicators on LCD ..........................................................................
How to use the buttons .................................................................
AUTO/COOL operation....................................................................
DRY/FAN operation.........................................................................
HEAT operation ..............................................................................
Setting the Timer function .............................................................
Handling the remote controller ......................................................
Remote Controller Specifications
Model
Rated Voltage
Signal Receiving Range
Environment
RG70C/BGEF, , RG70C1/BGEF RG70F/BGEF
3.0V(Dry batteries R03/LR03×2)
8m
。 。
-5 C 60 C
~
13
Operation of buttons
ON/OFF Button( )
1
This button turns the air conditioner ON
and OFF.
Temp Up Button( )
2
1
2
6
7
7
8
9
9
1
3
4
5
6
7
Temp
Mode Fan
Sleep
OK
Options
Timer
Turbo LED
RG70C/BGEF
RG70C1/BGEF
Fav.
2
8
9
10
11
12
13
Press this button to increase the set
temperature or Timer setting hours.
Temp Down Button( )
Push this button to decrease the set
temperature or Timer setting hours.
NO TE：
When the air conditio ne r op er ates under
heating mode with the s et t em pe rature of
O
17 C, pressing button c on ti no usly for
two times will activa te 8 D eg re e heating.
The indoor unit displ ay s ho ws F P .
Mode Button
3
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO
NO TE：Pl ea se do not s elect H EAT mode i f th e
machi ne y ou purc hased i s co oling o nly typ e.
Heat mo de i s not sup porte d by t he cool ing onl y
appli an ce.
Sleep button(applicable to
4
RG70C(1)/BGEF)
Used to active/cancel Sleep mode. It can
maintain the most comfortable temperature
and save energy. This function is available
on COOL, HEAT or AUTO mode only .
For the detail, see sleep operation in
,,
USER S MANUAL.
ECO Button(applicable to RG70F/BGEF)
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
remote controller will adjust the temperature
automatically to 24 C, fan speed of Auto to
save energy(but only if the set temperature
is less than 24 C). If the set temperature is
between 24 C and 30 C, press the ECO
button, the fan speed will change to Auto,
the set temperature will remain unchanged.
COOL
,
O O
DRY
,,
,,
O
O
,,
HEAT
,,
,,
FAN
1
2
Operation of buttons
Temp
1
3
4
5
6
Mode Fan
ECO
OK
Options
Timer
Turbo LED
Fav.
7
RG70F/BGEF
2
10
11
12
13
NOTE:
Pressing the ON/OFF button, or modifying
the mode or adjusting the set temperature to
less than 24 C will stop ECO operation.
Under ECO operation, the set temperature
should be 24 C or more. it may result in
O
O
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
5
Timer Button
Press this button to initiate the auto-on/
auto-off time sequence.
6
Turbo Button
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you press the TURBO button in
8
9
COOL mode, the unit will blow cool air
with strongest wind setting to jump-start
the cooling process.
When you press the TURBO button in
HEAT mode, for units with Electric heat
elements, the Electric Heater will activate
and jump-start the heating process.
7
LED Button
If you are sensitive to light when you go to
sleep, you can press the LED button to turn
off the LED display on the indoor unit. Press
the button again to turn it back on.
Fan Button
8
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NO TE：
You can not switch the fan speed in AUTO
or DRY mode.
Hold down this button for at least 2 seconds
to activate/cancel Silent mode. Due to low
frequency operation of compressor, it may result
in insufficient cooling and heating capacity
(applicalbe to the air conditioner with Silent
feature only)
Press Fan, MODE, Sleep, ON/OFF ,ECO or
Turbo button will cancel the Silent function.
Operation of buttons
Temp
1
3
4
5
6
Mode Fan
Sleep
OK
Options
Timer
Turbo LED
Fav.
7
RG70C/BGEF
RG70C1/BGEF
Swing Button
9
Used to stop or start horizontal louver movement or set the desired up/down air flow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
10
OK Button
Used to confirm the optional fucntions.
11
Swing Button
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The louver changes 6 degree in angle for each
press. If keep pushing more than 2 seconds,
2
8
9
10
11
12
13
the louver will swing left and right automatically.
12
Options Button
Press this button to select the air conditioner
function in a sequence of following:
Fresh
Press the Options button to select the desired
function, the selected symbol will flash on
the display area, then press the OK button
to confirm.
FRESH function( )
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending on
models) is energized and will help to
remove pollen and impurities from the air.
FOLLOW ME function( )
When the Follow Me func ti on i s ac tivated,
the remote display is a ct ua l te mperature
at its location. Th e remote control will sen d
this signal to the air co nd it io ner every 3
minutes interval un ti l pr es s the FOLLOW
ME button again.
Comfort function( )
When the Comfort func ti on i s ac tivated,
the air conditioner w il l be s et a t 23 C
automatically. It is not available under
fan mode.
Follo w me
Comfo rt
Self cl ea n
O
3
4
SELF CLEAN function( )
Under SELF CLEAN mode , th e ai r
conditioner will au to ma ti cally clean and
dry the Evaporator an d ke ep i t as f resh
for the next operatio n. I t is n ot a vailable
under heating or fan mo de .
( Indicate optional f un ct io ns)
13
Fav.Button
Used to restore the current settings or resume
previous settings.
Temp
2
1
3
4
5
6
Mode Fan
ECO
OK
Options
Timer
Turbo LED
Fav.
7
RG70F/BGEF
8
9
10
11
12
13
On the first time connecting to the power,
if push the Fav. button, the unit will operate on
AUTO mode, 26 C, and fan speed is Auto.
Push this button when remote controller is
on, the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature(if activated).
If pushing more than 2 seconds, the system
will automatically restore the current operation
settings including operating mode, setting
temperature, fan speed level and sleep
feature(if activated ).
NOTE:
Buttons design is bas ed o n ty pi cal model
and might be slightly d ifferent from the
actual one you purcha se d，th e ac tual
shape shall prevail .
All the functions des cr ib ed a re
accomplished by the u ni t. I f th e unit has no
this feature, there i s no c or re sponding
operation happene d wh en p re ss the
relative button on th e re mo te c ontroller.
When there are wide dif ferences between
,,
Remote controller I ll us tr ation and
,,
USER'S MANUAL on function desc ri pt io n,
the description of US ER 'S M AN UAL
shall prevail.
O
,,
,,
,,
,,
Indicators on LCD
Information are displayed when
the remote controller is powered
up.
Mode display
COOLAUTO
Displayed when data transmitted.
Displayed when remote controller is ON.
Displayed in ECO mode operation
Battery display(low battery detection)
Displayed when TIMER ON time is set.
Displayed when TIMER OFF time is set.
Not available for this unit.
Displayed when Silent feature is activated
Show set temperature or room
temperature, or time under TIMER setting.
Indicated that the air conditioner is
operating in Follow me mode
Displayed when select Fresh feature
Displayed Self clean when select feature
Displayed when Comfort feature select
Displayed in Sleep Mode operation.
Not available for this unit.
Fan speed indication
DRY HEAT FAN
Low speed
Medium speed
High speed
AUTO
Auto fan speed
Note:
All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
5
6
How to use the buttons
How to use the buttons
Temp
2
1
Mode
ECO
Timer
Turbo LED
Fan
OK
Options
Fav.
3
COOL operation
1. Press the MODE butto n to s el ec t
COOL mode.
2. Set your desired tem pe ra tu re using
the Temp or Temp button.
3. Press the FAN button to s el ec t th e
fan speed: AUTO, L OW, M ED,or
HIGH.
4. Press the ON/OFF but to n to s ta rt the
unit.
AUTO operation
SETTING TEMPERATURE
The operating tempe ra tu re r ange for units is
O
17-30 C. You can increa se o r decrease the
set tmeperature in 1 C in cr em en ts.
O
In AUTO mod e, t he u ni t will automatically
select the COOL, FAN, HE AT or DRY mode
based on the set temper at ur e.
1. Press the MODE butto n to s el ec t Auto mode.
2. Set your desired tem pe ra tu re using the
Temp or Tem p button.
3. Press the ON/OFF but to n to s ta rt the unit.
NOTE: FAN SPEED can t be set in Auto mode.
,
COOL
Temp
2
1
Mode
ECO
Timer
Turbo LED
Fan
OK
Options
Fav.
4
3
DRY
Temp
2
1
Mode
Sleep
Timer
Turbo LED
FAN operation
1. Press the MODE butto n to s el ec t FAN
mode.
2. Press FAN button to sel ec t th e fa n
speed: AUTO, L OW, M ED o r HIGH.
3. Press the ON/OFF but to n to s ta rt the
unit.
NOTE: You can t set temperature in FA N
mode. As a result, your re mo te c on trol s
LCD screen will not dis pl ay t em perature.
Fan
OK
Options
Fav.
,
3
,
DRY operation(dehumidifying)
1. Press the MODE butto n to s el ec t DRY
mode.
2. Set your desired tem pe ra tu re using the
Temp or Tem p button.
3. Press the ON/OFF but to n to s ta rt the unit.
NOTE: FAN SPEED can t be changed in
,
DRY mod e.
FAN
Temp
1
Mode
ECO
Timer
Turbo LED
Fan
OK
Options
Fav.
3
2
7
8
7
How to use the buttons
HEAT
Temp
2
1
Mode
ECO
Options
Timer
Turbo LED
Fan
OK
Fav.
HEAT operation
1. Press the MODE butto n to s el ec t
HEAT mode.
2. Set your desired tem pe ra tu re using
the Temp or Temp button.
3. Press the FAN button to s el ec t th e
fan speed: AUTO, L OW, M ED,or HIGH.
4. Press the ON/OFF but to n to s ta rt the
unit.
4
3
NOTE: As outdoor tempe ra tu re d rops,the
performance of your u ni t s HE AT fun ct io n
may be affe ct ed . In s uch instances, we
recommend using thi s ai r co nd itioner in
,
conjunction with ot he r he at ing appliance.
Setting the TIMER function
Your a ir c on ditioning unit has two ti me r- re lated
functions:
TIMER ON- sets the amou nt o f ti me r after
which the unit will aut om at ic ally turn on.
TIMER OFF- sets the a mo un t of t im e after
which the unit will aut om at ic ally turn off .
TIMER ON function
The TIMER ON function a ll ow s yo u to set a
period of time after wh ic h th e un it will
automatically tur n on, such as wh en y ou
come home fro m wo rk .
Press the Tim er b ut ton, the Timer on
1.
indicator " " display s an d fl as hes. By
defalt, the last time p er io d th at you set
and an "h" (indiction g ho ur s) will appear
on the display.
Note:
This number indicat es t he
amount of time after th e cu rrent time
that you want the unit to turn on.
For example, if you s et TIMER ON for
2 hours, will appear on the
" 2.0h "
screen, a nd t he u ni t wi ll t ur n on aft er
2 hours.
2. Press the Tem p or b ut ton to set
the time when you want th e un it t o tu rn
on.
3. Wa it 2 s ec onds, then the TI ME R ON
function will be acti va te d. The digital
display on your remot e co nt ro l will then
return to the tempera tu re d is play.
1
2
x5
Temp
or
3
MODE
FAN
S
L
E
EP
Example
hours.
ON/OFF
SHORT
CUT
TEMP
TIMER ON
TIMER OF
F
: Setting unit to turn on after 2.5
1sec
4
2sec
TIMER funct io nOFF
The TIMER OFF functio n al lo ws y ou to
set a period of time afte r wh ic h th e unit
will automaticall y tu rn off , such as when
you wake up.
1
2
x10
Temp
or
1sec
4
2sec
3
ON/OFF
MODE
F
AN
S
L
EEP
Example
SHORT
CUT
TEMP
TIMER ON
TIMER OF
F
: Setting unit to turn off after 5
hours.
NOTE:
When setting the TI MER ON or
TIMER OFF functions , up t o 10 h ou rs,
the time will incre ase in 30 minute
increme nt s wi th e ach pres s. Af ter 10
hours and up to 24, it will incre as e in 1
hour increm en ts . The timer wil l revert to
zero afte r 24 h ou rs .
You ca n tu rn off either function by
setting its timer to .
" 0.0h "
Continue to press
Temp or
Temp
button untill desir ed
time is reached.
Mode
9
10
Fan
Setting both TIME R ON a nd T IM ER OFF at the same time
Keep in mind that the tim e pe ri od s you set for both functi on s re fe r to h ours after the
current time. For exa mp le , sa y that the curren t ti me i s 1:00 PM, and you want the u ni t
to tur n on a utomatically at 7:00 PM . You wa nt i t to o perate for 2 hours, the n au to ma tically turn off at 9:0 0 PM .
Example: Setting th e un it t o tu rn on after 6 hours, oper at e fo r 2 ho urs, then turn off
(see the figure below )
Your remot e di sp la y
Do the following:
1
5
2
Temp
or
6
X12
Temp
or
X16
Timer is set To turn ON
3
7
4
sec
3
ON/OFF
MODE
SHORT
CUT
TEMP
TIMER ON
8
sec
3
ON/OFF
MODE
SHORT
CUT
TEMP
TIMER ON
Timer starts
Current
time 1PM
2PM 3PM
6 hours later
8 hours later
4PM 5PM
6 hours from current time
Timer is set to turn OFF
8 hours from current time
Unit turns Unit turns
ON
6PM 7PM 8PM 9PM
OFF
11
11
12
12
Handling the remote controller
Location of the remote controller.
Use the remote controller within a distance of 8
8m
meters from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
The air conditioner will not operate if curtains,
doors or other materials block the signals from
the remote controller to the indoor unit.
Prevent any liquid from falling into the remote
controller. Do not expose the remote controller
to direct sunlight or heat.
If the infrared signal receiver on the indoor unit
is exposed to direct sunlight, the air conditioner
may not function properly. Use curtains to
prevent the sunlight from falling on the receiver.
If other electrical appliances react to the remote
controller, either move these appliances or
consult your local dealer.
Do not drop the remote controller. Handle with care.
Do not place heavy objects on the remote controller,
or step on it.
Using the remote controller holder
(optional)
The remote controller can be attached to a wall or
pillar by using a remote controller holder(not supplied,
purchased separately).
Before installing the remote controller, check that the
air conditioner receives the signals properly.
Install the remote controller with two screws.
For installing or removing the remote controller, move
it up or down in the holder.
CAUTIONS
Replacing batteries
The following cases signify exhausted batteries.
Replace old batteries with new ones.
Receiving beep is not emitted when a signal
is transmitted.
Indicator fades away.
The remote controller is powed by two dry
batteries (R03/LR03X2) housed in the back rear
part and protected by a cover.
(1) Remove the back cover of the remote
controller.
(2) Remove the old batteries and insert the new
batteries,placing the(+) and (-) ends correctly.
(3) Install the cover back on.
NOTE: When the batteries are removed, the
remote controller erases all programming. After
inserting new batteries, the remote controller
must be reprogrammed.
CAUTIONS
Do not mix old and new batteries or batteries
of different types.
Do not leave the batteries in the remote
controller if they are not going to be used for
2 or 3 months.
Do not dispose batteries as unsorted
municipal waste. Collection of such waste
separately for special treatment is necessary.
13
14
Loading...