Midea RG51G/E, RG51H/E, RG51F/E, RG51F1/E, RG51F3/E Owner's Manual

CR142-R51G(H) 202055091488

AIR CONDITIONER

REMOTE CONTROLLER ILLUSTRATION

Thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner.

The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details.

11

CONTENTS

22

Model

Rated Voltage

8m

3.0V(Dry batteries R03/LR03 2)

RG51G/E, RG51H/E

Remote Controller Specifications

Environment

Signal Receiving Range

-5 C 60C

~~

NOTE:

Buttons design is based on typical model and might be slightly different from the

actual one you purchased the actual shape shall prevail.

All the functions described are accomplished by the unit. If the unit has no this feature, there is no corresponding operation happened when press the relative button on the remote controller. When there are wide differences between Remote controller Illustration and USER'S MANUAL on function description, the description of USER'S MANUAL shall prevail.

,,

, ,

TEMP

AUTO COOL DRY HEAT

FAN HIGH MED LOW

MODE

FAN /SILENCE

TIMER ON

SLEEP

ECO

ON/OFF

TIMER OFF

RESET LOCK

O

SET TEMPERATURE( C)

O

SET TEMPERATURE( C)

SWING

DO NOT DISTURB

TURBO

2

3

5

6

7

8

12

Handling the remote controller ......................................................

Remote controller Specifications...................................................

Operation of buttons .................. ..................................................

Indicators on LCD ..........................................................................

How to use the buttons .................................................................

Auto operation.................................................................................

Cooling/Heating/Fan operation......................................................

Dehumidifying operation ...............................................................

Timer operation...............................................................................

RG51H/E

RG51G/E

33

44

Operation of buttons

NOTE Temperature contol is not available in Fan mode.

TEMP

AUTO COOL DRY HEAT

FAN HIGH MED LOW

MODE

TIMER ON

SLEEP

ECO

ON/OFF

TIMER OFF

RESET LOCK

1

2

4

5

6

7

3

9

8

10

11

12

13

O

SET TEMPERATURE( C)

O

SET TEMPERATURE( C)

SWING

TURBO

1

TEMP UP Button Push this button to increase the indoor temper-

OO

ature setting in 1 C increments to 30 C.

2

TEMP DOWN Button

Push this button to decrease the indoor temper-

OO

ature setting in 1 C increments to 17 C.

3

MODE Button

4

SWING Button

6

7

5

RESET Button Once the recessed RESET button is pressed, all of the current settings will be cancelled and the controller will return to the initial settings.

AUTO

COOL

DRY

HEAT FAN

Used to stop or start horizontal louver movement or set the desired up/down air flow direction. The louver changes 6 degree in angle for each press. If keep pushing more than 2 seconds, the louver will swing up and down automatically.

Press this button to modify the air conditioner mode in a sequence of following:

NOTE Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling only appliance.

DO NOT DISTURB Button

Press this button to turn off the indoor screen display, and also turn off the Air conditioner buzzer, the fan speed shifts to low, which create a comfortable and quiet environment. Press it again to cancel this function. Under DO NOT DISTURB mode, the display will illuminate for 10 seconds while adjusting the mode, set temperature or fan speed, etc.

8

9

ON/OFF Button Operation starts when this button is pressed and stops when the button is pressed again.

Used to enter the energy efficient mode. Under cooling mode, press this button, the remote controller will adjust the temperature

O

automatically to 24 C, fan speed of Auto to save energy(but only if the set temperature

O

is less than 24 C). If the set temperature is

OO

between 24 C and 30 C, press the ECO button, the fan speed will change to Auto, the set temperature will remain unchanged.

NOTE:

Pressing the TURBO and SLEEP button, modifying the mode or adjusting the set

O

temperature to less than 24 C will stop ECO operation. Under ECO operation, the set temperature

O

should be 24 C or more. it may result in insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.

ECO Button(applicalbe for RG51G/E):

DO NOT DISTURB

RG51G/E

RG51H/E

SLEEP Button(applicable for RG51H/E):

NOTE: While the unit is running under

SLEEP mode, it would be cancelled if MODE, FAN SPEED or ON/OFF button is pressed.

Active/Disable sleep function. It can maintain the most comfortable temperature and save energy. This function is available on COOL, HEAT or AUTO mode only . For the details, please see sleep operation in USER S MANUAL.

,

,,

Used to select the fan speed in four steps: AUTO LOW MED HIGH

FAN/SILENCEC Button

If pushing more than 2 seconds, the Silence function will be activated, pushing more than 2 seconds again to disable. When the Silence function is activated, the compressor will operate at low frequency and the indoor unit will bring faint breeze, which will reduce the noise to the lowest level and creat a quiet and comfortable room for you. Due to low frequency operation of compressor, it may result in insufficient cooling and heating capacity.

FAN /SILENCE

Indicators on LCD

Fan speed indication

Mode display

Information are displayed when the remote controller is powered up.

Displayed when data transmitted.

Displayed when remote controller is ON.

Low speed

NO display

Medium speed

High speed

Auto fan speed

Note:

All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation only the relative functional signs are shown on the display window.

Displayed when TIMER ON time is set.

Indicated all the current settings are locked

Displayed when TIMER OFF time is set.

Show set temperature or room temperature, or time under TIMER setting.

AUTO

HEAT FAN

COOL DRY

55

66

TIMER ON OFF

TIMER ON

TIMER OFF

SET TEMPERATURE

FAN HIGH MED LOW

HIGH MED LOW

AUTO COOL DRY HEAT

Active/Disable Turbo function. Turbo function enables the unit to reach the preset temperature at cooling or heating operation in the shortest time(if the indoor unit does not support this function, there is no corresponding operation happened when pressing this button.)

13

TURBO Button

TEMP

AUTO COOL DRY HEAT

FAN HIGH MED LOW

MODE

TIMER ON

ECO

ON/OFF

TIMER OFF

RESET LOCK

1

2

4 5 6

7

3

9

8

10

11 12

13

O

SET TEMPERATURE( C)

SWING

TURBO

DO NOT DISTURB

TIMER OFF Button

11

Press this button to initiate the auto-off time sequence. Each press will increase the auto

-timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the autotimed program, simply adjust the auto-off time to 0.0

12

LOCK Button Press this recessed button to lock all current settings, and the remote controller will not accept any operation except that of the LOCK. Use the LOCK mode when you want to prevent settings from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol will appear on the remote controller display when the lock function is activated.

TIMER ON Button

10

Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays

10.0, each press will increase the autotimed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0.0.

FAN /SILENCE

77

Dehumidifying operation

Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.

1. Press the MODE button to select DRY mode.

2. Press the UP/DOWN buttons to set the desired temperature.

3. Press the ON/OFF button to start the air conditioner.

The temperature

OO

can be set within a range of 17 C~ 30 C

O

in 1 C increments.

In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically controlled.

NOTE

How to use the buttons

77

88

TEMP

AUTO COOL DRY HEAT

FAN HIGH MED LOW

MODE

TIMER ON

ECO

ON/OFF

TIMER OFF

RESET LOCK

O

SET TEMPERATURE( C)

SWING

TURBO

3

1

2

TEMP

AUTO COOL DRY HEAT

FAN HIGH MED LOW

MODE

TIMER ON

ECO

ON/OFF

TIMER OFF

RESET LOCK

O

SET TEMPERATURE( C)

O

SET TEMPERATURE( C)

SWING

DO NOT DISTRUB

TURBO

How to use the buttons

Cooling /Heating/Fan operation

Ensure the unit is plugged in and power is available.

1. Press the MODE button to select COOL, HEAT(cooling & heating models only) or FAN mode.

2. Press the UP/DOWN buttons to set the desired temperature.

3. Press the FAN button to select the fan speed in four steps- Auto, Low, Med,or High.

4. Press the ON/OFF button to start the air conditioner.

The temperature can

OOO

be set within a range of 17 C~ 30 C in 1 C increments.

In the FAN mode, the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either. In this case, only step 1, 3 and 4 may be performed.

NOTE

Auto operation

Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.

1. Press the MODE button to select Auto.

2. Press the UP/DOWN button to set the desired temperature. The temperature can

OOO

be set within a range of 17 C~ 30 C in 1 C increments.

3. Press the ON/OFFbutton to start the air conditioner.

1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller.

2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.

3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.

NOTE

4

3

1

2

FAN /SILENCE

The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,

5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.

CAUTION

!

Example of timer setting

(Auto-on Operation)

The TIMER ON feature is useful when you want the unit to turn on automatically before you return home. The air conditioner will automatically start operating at the set time.

To start the air conditioner in 6 hours.

1. Press the TIMER ON button, the last setting of starting operation time and the signal "h " will show on the display area.

2. Press the TIMER ON button to display "6.0h " on the TIMER ON display of the remote controller.

3. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON" indicator remains on and this function is activated.

TIMER ON

Example:

99

1010

TIMER ON

Start

Off

6 hours later

h

Set

TEMP

AUTO COOL DRY HEAT

FAN HIGH MED LOW

MODE

TIMER ON

ECO

ON/OFF

TIMER OFF

RESET LOCK

O

SET TEMPERATURE( C)

SWING

TURBO

1

2

Timer operation

Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit.

1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation.

2. Push the TIMER ON button again to set desired Auto-on time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3. After setting the TIMER ON ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "h" will disappear and the set temperature will re-appear on the LCD display window.

To set the Auto-on time.

To set the Auto-off time.

1. Press the TIMER OFF button. The remote controller shows TIMER OFF, the last Auto-off setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-off time to stop the operation.

2. Push the TIMER OFF button again to set desired Auto-off time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3. After setting the TIMER OFF ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "H " will disappear and the set temperature will re-appear on the LCD display window.

DO NOT DISTRUB

FAN /SILENCE

1111

1212

Example:

TIMER ON TIMER OFF (Off Start Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house.

To start the air conditioner 2 hours after setting, and stop it 5 hours after setting.

1. Press the TIMER ON button.

2. Press the TIMER ON button again to display

2.0H on the TIMER ON display.

3. Press the TIMER OFF button.

4. Press the TIMER OFF button again to display

5.0H on the TIMER OFF display .

5. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON OFF" indicator remains on and this function is activated.

1111

1212

Off

Stop

Start

TIMER ON OFF

h

2 hours later after setting

5 hours later after setting

Set

(Auto-off Operation)

The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time.

To stop the air conditioner in 10 hours.

1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "h " will show on the display area.

2. Press the TIMER OFF button to display "10h " on the TIMER OFF display of the remote controller.

3. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER OFF" indicator remains on and this function is activated.

TIMER OFF

Example:

To stop the air conditioner 2 hours after setting and start it again 10 hours after setting.

1. Press the TIMER OFF button.

2. Press the TIMER OFF button again to display

2.0H on the TIMER OFF display.

3. Press the TIMER ON button.

4. Press the TIMER ON button again to display 10H on the TIMER ON display .

5. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON OFF" indicator remains on and this function is activated.

TIMER OFF TIMER ON (On Stop Start operation) This feature is useful when you want to stop the air conditioner after you go to bed, and start it again in the morning when you wake up or when you return home.

Example:

COMBINED TIMER

(Setting both ON and OFF timers simultaneously)

TIMER OFF

Stop

On

Set 10 hours later

h

TIMER ON OFF

h

On

Stop

2 hours later after setting

Set

Start

10 hours later after setting

The following cases signify exhausted batteries. Replace old batteries with new ones. Receiving beep is not emitted when a signal is transmitted. Indicator fades away.

The remote controller is powed by two dry batteries (R03/LR03X2) housed in the back rear part and protected by a cover. (1) Remove the cover in the rear part of the remote controller. (2) Remove the old batteries and insert the new batteries,placing the(+) and (-) ends correctly. (3) Install the cover back on.

NOTE: When the batteries are removed, the remote controller erases all programming. After inserting new batteries, the remote controller must be reprogrammed.

Replacing batteries

CAUTIONS

Do not mix old and new batteries or batteries of different types. Do not leave the batteries in the remote controller if they are not going to be used for 2 or 3 months. Do not dispose batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

1313

1212

Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep.

The remote controller can be attached to a wall or pillar by using a remote controller holder(not supplied, purchased separately). Before installing the remote controller, check that the air conditioner receives the signals properly. Install the remote controller with two screws. For installing or removing the remote controller, move it up or down in the holder.

Location of the remote controller.

Using the remote controller holder(optional)

CAUTIONS

The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit. Prevent any liquid from falling into the remote controller. Do not expose the remote controller to direct sunlight or heat. If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly. Use curtains to prevent the sunlight from falling on the receiver. If other electrical appliances react to the remote controller, either move these appliances or consult your local dealer. Do not drop the remote controller. Handle with care. Do not place heavy objects on the remote controller, or step on it.

Handling the remote controller

8m

T E M

P

A U TO C O O

L D R Y H E A T

F

A

N H I GH M E D

LOW

M O D E

F

A N

SP E

ED

T I M

E R O

N

S L E

E P

O

N / O

F F

T I M E

R O

F F

A

IR

D IR E C

TION

R E

S E T L

O CK

S

E T T

E MP

E R

A T U R E

()

L E D

D

IS P LA

Y

T U R

B O