Midea RG35A1/BGCEF, RG35B/BGCE, RG35A1/BGEF, RG35A/BGEF, RG35B/BGE Illustration Manual

CR004-RG35/36 202055090998 20110114

AIR CONDITIONER

REMOTE CONTROLLER ILLUSTRATION

Th a nk y o u ve r y mu ch fo r pu r ch a si n g ou r air c on d it i on e r. Pl e as e r ea d t hi s own er ' s ma n ua l c ar efu ll y b ef o re u s in g yo u r ai r c on d it ion er .

Th e d es ig n a nd s pec if ica ti ons a re s ubj ec t t o ch an g e wi th o ut p ri o r no tic e fo r pro du ct im p ro ve m en t. Co ns ult w it h the s al es ag en c y or m an u fa ct u re r fo r d et ail s.

11

CONTENTS

Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep.

Location of the remote controller.

8m

The remote controller is powed by two dry batteries(R03/LR03X2) housed in the rear part and protected by a cover. (1) Remove the cover by pressing and sliding off. (2) Remove the old batteries and insert the new batteries,placing the(+) and (-) ends correctly. (3) Reattach the cover by sliding it back into position.

NOTE: When the batteries are removed, the remote controller erases all programming. After inserting new batteries, the remote controller must be reprogrammed.

Replacing batteries

Handling t he remote con troller

CAUTIONS

The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit. Prevent any liquid from falling into the remote controller. Do not expose the remote controller to direct sunlight or heat. If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly. Use curtains to prevent the sunlight from falling on the receiver. If other electrical appliances react to the remote controller. either move these appliances or consult your local dealer.

22

CAUTIONS

Do not mix old and new batteries or batteries of different types. Do not leave the batteries in the remote controller if they are not going to be used for 2 or 3 months. Do not dispose batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

2

3

5

8

9

10

11

14

15

Handling the remote controller ......................................................

Remote controller Specifications...................................................

Function buttons .................. .........................................................

Indicators on LCD ..........................................................................

How to use the buttons .................................................................

Auto operation.................................................................................

Cooling/Heating/Fan operation......................................................

Dehumidifying operation ...............................................................

Adjusting air flow direction............................................................

Timer operation...............................................................................

SLEEP/FRESH function..................................................................

LED/FOLLOW ME function ...........................................................

TRUBO/SELF CLEAN function ......................................................

NOTE: Replace the batteries when there is no receiving beep from the indoor

unit or if the transmission indicator on the remote controller fails to light.

Model

Rated Voltage

8m (when using 3.0 voltage, it gets 11m)

3.0V(Dry batteries R03/LR03×2)

Remote Controller Specifications

1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling only model without), and FAN.

2. Timer Setting Function in 24 hours. 。。

3. Indoor Setting Temperature Range : 17 C~30 C.

4. Full function of LCD (Liquid Crystal Display).

Environment

Signal Receiving Range

Performance Feature

33 44

RG35A(2)/BG(C)EF,RG35A1/BG(C)EF,RG35B/BG(C)E,RG35C/BG(C)E

RG36A(1)/BG(C)EF

RG36A2/BG(C)EF RG36C/BG(C)E

RG35A(2)/BG(C)EF

RG35B/BG(C)E

RG35C/BG(C)E

RG36A(1)/BG(C)EF,RG36A2/BG(C)EF,RG36B(1)/BG(C)E,RG36C/BG(C)E

。。

-5 C 60 C

~~

TURBO SELF CLEAN

TURBO

SLEEP FRESH

SLEEP

SHORT CUT

TIMER ON

TIMER OFF

LOCK

RESET

LED FOLLOW ME

LED

FAN SPEED

DIRECT

SWING

MODE

R

M

O

Y

E

M

MODE

TEM P

MODE

SWING

TEMP

SHORTC UT

SHORTCUT

FAN SPEED

TIMER OFF

RESET

LOCK

LED FOLLOW ME

LED

TIMER ON

TURBO SELF CLEAN

TURBO

DIRECT

SLEEP FRESH

SLEEP

NO T E: T h er e is on ly sl ig h t di f fe ren ce on t he a p pe a ra nce b etw ee n R G3 5 se r ie s a nd R G 36 se rie s. T h e op e ra tio ns an d fu n ct i on s of th e but to n s ar e th e s am e . So me bu tto ns h a ve t w o fu nct ion s, s o me b u tt ons h ave o nl y o ne fu n ct i on , for e xam pl e : an d . P le ase r efe r to t h e ab o ve

il l us t ra tio ns fo r de t ai l s.

SLEEP FRESH

SLEEP

MODE

SWING

TEMP

SHORTC UT

FAN SPEED

TIMER OFF

RESET LOCK

LED FOLLOW ME

TIMER ON

DIRECT

SLEEP

RG35A1/BGEF

TURBO FP

SLEEP

SHORT CUT

TIMER ON

TIMER OFF

LOCK

RESET

LED

FAN SPEED

DIRECT

SWING

MODE

TEM P

RG36B(1)/BG(C)E

TURBO FP

ON /OFF

Mo d le s o f RG 3 6B /BG (C ) E do no t h av e F P fu n ct ion .

F

E

O

M

L

W

L

O

55 66

Function buttons

1

2

Each time the button is pressed, the operation mode is selected in a sequence of following:

3

MODE Button

1

2

4

5

3

8

10

9

4

5

ON/OFF Button( ) Operation starts when this button is pressed and stops when this button is pressed again.

NOTE: Heat mode is for Cooling & Heating models only.

AUTO

COOL

DRY

HEAT FAN

6

7

11 12 13

14

SHORTCUT(MEMORY SHORTCUT) Button

NOTE: While the unit is running under SLEEP

mode, it would be cancelled if press the MODE, FAN SPEED or ON/OFF button.

TIMER ON Button

Used to restore the current settings or resume previous settings. On the first time connecting to the power, if push the SHORTCUT button, the unit

O

will operate on AUTO mode, 24 C, and fan speed is Auto. Push this button when remote controller is on, the system will automatically revert back to the previous settings including operating mode, setting temperature, fan speed level and sleep feature(if activated). And transmit the signals to the unit. If push this button when remote controller is off, the system will only resume the previous settings and will not transmit the signals to the unit. And the sleep feature is disable. If pushing more than 2 seconds, the system will automatically restore the current operation settings including operating mode, setting temperature, fan speed level and sleep feature(if activated ).

15

8

6

7

MODE

SWING

TEMP

SHORTCU T

FAN SPEED

TIMER OFF

RESET LOC K

LED FOLLOW ME

TIMER ON

TURBO SELF CLEAN

DIRECT

SLEEP FRESH

1

2

4

5

3

9

10

8

6 7

11

12

13

14

15

TURBO SELF CLEAN

SLEEP FRESH

SHORT CUT

TIMER ON

TIMER OFF

LOCK

RESET

LED FOLLOW ME

FAN SPEED

DIREC T

SWING

MODE

TEM P

RG 3 5A ( 2)

RG 3 6A ( 1)

SWING Button

DIRECT Button

Used to stop or start horizontal louver auto swing feature.

Used to change the louver movement and set the desired up/down air flow direction. The

O

louver changes 6 in angle for each press.

Active/Disable SLEEP function. If pushing more than 2 seconds, the FRESH function will be activated, pushing more than 2 seconds again to disable.

SLEEP/FRESH Button

,

Active/Disable TURBO function. If pushing more than 2 seconds, the SELF CLEAN function will be activated, pushing more than 2 seconds again to disable(depending on models).During the heating operation(only when the setting mode is HEAT),press this button and the unit will operate at a setting

O

temperature of 8 C.The display window of indoor

unit will display FP.Press the buttons of ON/OFF, SLEEP,FP,MODE,FAN SPEED,UP,DOWN and SHORTCUT while operating will cancel the FP function.

TURBO/SELF CLEAN(or FP) Button:

,

When you press the recessed RESET button, all current settings are cancelled and the control will return to the initial settings.

RESET Button:

Push this button to decrease setting temperature or to decrease Hour during Timer setting.

UP Button( ) Push this button to increase setting temper-

ature or to increase Hour during Timer setting.

DOWN Button( )

9

-

+

12

10

11

Used to select the fan speed in four steps: AUTO LOW MED HIGH

FAN SPEED Button

Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10H, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0:0.

1

2

4

5

3

8

10

9

6

7

11 12 13

14

15

MODE

SWING

TEMP

SHORTCU T

FAN SPEED

TIMER OFF

RESET LOC K

LED FOLLOW ME

TIMER ON

TURBO FP

DIRECT

SLEEP

RG 3 5A 1

1

2

4

5

3

9

10

8

6 7

11

12

13

14

15

TURBO

FP

SLEEP

SHORT CUT

TIMER ON

TIMER OFF

LOCK

RESET

LED

FAN SPEED

DIREC T

SWING

MODE

TEM P

RG 3 6B 1

,,

ON /OFF

ON/ OFF

Function buttons(continued)

14

77 88

Indicators on LCD

15

LOCK Button

LED/FOLLOW ME Button

Disable/Active indoor screen Display. When pushing more than 2 seconds, the FOLLOW ME function will be activated, pushing more than 2 seconds again to disable.

,

Transmission Indicator

Temp./Timer display

Fan speed display

Sleep Display

Mode display

ON/OFF display

This transmission indicator lights when remote controller transmits signals to the indoor unit.

Displays the current operation mode. Including auto( ), cool( ), dry( ), heat( ) (Not applicable to cooling only models), fan( ) and back to auto( ).

O O

Displays the temperature setting(17 C~30 C). When you set the operating mode to FAN, no temperature setting is displayed. And if in the TIMER mode, shows the ON and OFF settings of the TIMER.

Displayed by pressing the ON/OFF button. Press the ON/OFF button again to remove.

Displays the selected fan speed, AUTO(no display) and three fan speed levels " " (LOW) " " (MED) " " (HIGH) can be indicated. The fan speed is AUTO when the operating mode is either AUTO or DRY.

Displayed under sleeping operation. Press the SLEEP button again to remove.

Note:

All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation only the relative functional signs are shown on the display window.

Lock Display

Displayed when LOCK mode is activated.

FOLLOW ME Display

Displayed when FOLLOW ME function is activated.

1

2

4

5

3

9

10

8

6 7

11

12

13

14

15

TURBO SELF CLEAN

SLEEP FRESH

SHORT CUT

TIMER ON

TIMER OFF

LOCK

RESET

LED FOLLOW ME

FAN SPEED

DIRECT

SWING

MODE

TEM P

When you press the recessed LOCK button, all current settings are locked in and the remote controller does not accept any operation except that of the LOCK. Press again to cancel the LOCK mode.

NO T E: Bu t to n s de sig n mig ht b e s li g ht ly di f fe r en t fro m the a ct u al o n e yo u pu r ch a se d dep end in g o n in d iv idu al mo d el s . Al l t he f u nc tio ns de sc r ib e d ab ove ar e a cc o mp lis hed b y th e i nd o or u nit ,

if t h e in d oo r uni t has n o th i s fe a tu re, th e re i s n o co rre spo nd i ng o p er ati on ha p pe n ed w hen p res s th e r el a ti ve bu t to n o n th e rem ote c on t ro l le r.

auto cool dr y heat fan

sleep foll ow me lock run

SET TEM P. TIMER ONO FF

TIMER OFF Button

13

Press this button to initiate the auto-off time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10H, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-off time to 0:0

ON /OFF

How to use the buttons

99 1010

Cooling /Heating/Fan operation

En s ur e t he u nit i s plu gg e d in a n d po wer i s av a il a bl e.

1. P r es s t he M O DE b utt on t o s el e ct C OOL , HE A T( c oo lin g & hea ti n g mo d el s onl y) or FA N m od e .

2. P r es s t he U P /D OWN b ut t on s t o se t the de s ir e d te mpe rat ur e .

3. P r es s t he F A N bu tto n to s e le c t th e fan s pee d in f o ur s t ep s- Au to, L ow , M ed , or H igh .

4. P r es s t he O N /O FF bu tt o n to s t ar t the a ir co n di t io ner .

Th e t em p er atu re ca n

O O O

be s e t wi t hi n a ran ge of 1 7 C~ 30 C in 1 C in c re m en ts.

In the FAN mode, the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either. In this case, only step 1, 3 and 4 may be performed.

NOTE

Auto operation

En s ur e t he u nit i s plu gg e d in a n d po wer i s av a il a bl e. Th e OPE RA T IO N i nd ica tor o n th e di s pl a y pa nel o f the i nd o or u n it s tar ts fl as h in g .

1. P r es s t he M O DE b utt on t o s el e ct A uto .

2. P r es s t he U P /D OWN b ut t on t o s et t he de s ir e d te mpe rat ur e . Th e t em per atu re c a n

O O O

be s e t wi t hi n a ran ge of 1 7 C~ 30 C in 1 C in c re m en ts.

3. P r es s t he O N /O FFb ut t on t o s ta rt th e air co n di t io ner .

1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller.

2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.

3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.

NOTE

3

1

2

MODE

SWING

TEMP

SHORTC UT

FAN SPEED

TIMER OFF

RESET LOCK

LED FOLLOW ME

TIMER ON

TURBO SELF CLEAN

DIRECT

SLEEP FRESH

4

1

2

MODE

SWING

TEMP

SHORTC UT

FAN SPEED

TIMER OFF

RESET LOCK

LED FOLLOW ME

TIMER ON

TURBO SELF CLEAN

DIRECT

SLEEP FRESH

3

Dehumidifying operation

En s ur e t he u nit i s plu gg e d in a n d po wer i s av a il a bl e. Th e OPE RA T IO N i nd ica tor o n th e di s pl a y pa nel o f the i nd o or u n it s tar ts fl as h in g .

1. P r es s t he M O DE b utt on t o s el e ct D RY mo de.

2. P r es s t he U P /D OWN b ut t on s t o se t the de s ir e d te mpe rat ur e .

3. P r es s t he O N /O FF bu tt o n to s t ar t the a ir co n di t io ner .

Th e t em p er atu re

O O

ca n b e se t w it hin a r ang e of 1 7 C~ 3 0 C

O

in 1 C in c re m en ts.

In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically controlled.

NOTE

Adjusting air flow direction

Use the SWING and DIRECT button to adjust the desired airflow direction.

1. When push the DIRECT button, the horizontal louver changes 6 degree in angle for each push.

2. When push the SWING button, the louver will swing up and down automatically.

NOTE: When the louver swing or move to a position which would affect the cooling or heating effect of the air conditioner, it would automatically change the swing/moving direction.

3

1

2

MODE

SWING

TEMP

SHORTC UT

FAN SPEED

TIMER OFF

RESET LOCK

LED FOLLOW ME

TIMER ON

TURBO SELF CLEAN

DIRECT

SLEEP FRESH

1111

1212

Timer oper ation

Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit.

1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "h" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation.

2. Push the TIMER ON button again to set desired Auto-on time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3. After setting the TIMER ON ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "h" will disappear and the set temperature will re-appear on the LCD display window.

To set the Auto-on time.

To set the Auto-off time.

1. Press the TIMER OFF button. The remote controller shows TIMER OFF, the last Auto-off setting time and the signal "h" will be shown on the LCD display area. Now it is ready to reset the Auto-off time to stop the operation.

2. Push the TIMER OFF button again to set desired Auto-off time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.

3. After setting the TIMER OFF ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then after approximately another 2 seconds, the signal "h" will disappear and the set temperature will re-appear on the LCD display window.

1

2

MODE

SWING

TEMP

SHORTC UT

FAN SPEED

TIMER OFF

RESET LOCK

LED FOLLOW ME

TIMER ON

TURBO SELF CLEAN

DIRECT

SLEEP FRESH

The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,

5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.

CAUTION

!

Example of t imer settin g

Start

Off

6 hours later

(Auto-on Operation)

The TIMER ON feature is useful when you want the unit to turn on automatically before you return home. The air conditioner will automatically start operating at the set time.

To start the air conditioner in 6 hours.

1. Press the TIMER ON button, the last setting of starting operation time and the signal "h" will show on the display area.

2. Press the TIMER ON button to display "6:0h" on the TIMER ON display of the remote controller.

3. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON" indicator remains on and this function is activated.

TIMER ON

Example:

t

Se

TIME R ON

1313

1414

Stop

On

Set 10 hours later

(Auto-off Operation)

The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time.

To stop the air conditioner in 10 hours.

1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "h" will show on the display area.

2. Press the TIMER OFF button to display "10h" on the TIMER OFF display of the remote controller.

3. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER OFF" indicator remains on and this function is activated.

TIMER OFF

Example:

On

Stop

2 hours later after setting

Set

To stop the air conditioner 2 hours after setting and start it again 10 hours after setting.

1. Press the TIMER OFF button.

2. Press the TIMER OFF button again to display

2.0h on the TIMER OFF display.

3. Press the TIMER ON button.

4. Press the TIMER ON button again to display 10h on the TIMER ON display .

5. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON OFF" indicator remains on and this function is activated.

TIMER OFF → TIMER ON (On → Stop → Start operation) This feature is useful when you want to stop the air conditioner after you go to bed, and start it again in the morning when you wake up or when you return home.

Example:

COMBINED TIMER

(Setting both ON and OFF timers simultaneously)

Start

Example:

TIMER ON → TIMER OFF (Off → Start → Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house.

To start the air conditioner 2 hours after setting, and stop it 5 hours after setting.

1. Press the TIMER ON button.

2. Press the TIMER ON button again to display

2.0h on the TIMER ON display.

3. Press the TIMER OFF button.

4. Press the TIMER OFF button again to display

5.0h on the TIMER OFF display .

5. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON OFF" indicator remains on and this function is activated.

Off

Stop

Start

10 hours later after setting

2 hours later after setting

5 hours later after setting

Set

NOTE: The timer setting(TIMER ON or TIMER OFF) that in sequence occurs directly after the set time will be activated first.

SLEEP/FRESH function

TIM ER OFF

TIM ER ON OFF

TIME R ON OFF

1

MODE

SWING

TEMP

SHORTC UT

FAN SPEED

TIMER OFF

RESET LOCK

LED FOLLOW ME

TIMER ON

TURBO SELF CLEAN

DIRECT

SLEEP FRESH

Press this button less than 2nds will initiate SLEEP function. And if keep pressing this button more than 2nds,the FRESH function is initiated. The sleep function enables the unit to automatically increase(cooling) or decrease(heating)

O

1 C per hour for the first two hours, then hold steady for the next 5 hours, after that the unit will stop operation. It can maintain the most comfortable temperature and save energy.

NOTE: The SLEEP function is only available under Cooling, Heating and AUTO operations.

When the FRESH function is initiated, the Ionizer/Plasma Dust Collector(depending on models) is energized and will help to remove pollen and impurities from the air.

1515

LED/FOLL OW ME functio n

Press this button less than 2nds will initiate LED function. And if keep pressing this button more than 2nds,the FOLLOW ME function is initiated.

Wh e n th e F ol l ow M e fun ct i on i s a ct i va ted , th e re m ot e d is p la y is ac tu a l te m pe r at ure a t it s lo c at i on . T he r emo te c o nt r ol w i ll s end t hi s si g na l t o th e a ir c ond it i on e r ev e ry 3 m inu te s in t er v al u n ti l pre ss t h e FO L LO W M E bu tto n ag a in . Th e F ol l ow M e f un cti on i s n ot a v ai l ab le un de r DR Y a nd F A N mo d e. Sw i tc h t he o p er ati on m o de o r t ur n o ff t he un it wi l l ca n ce l t he F oll ow M e f un c ti o n au tom at i ca l ly .

Press this button less than 2nds will initiate TURBO function. And if keep pressing this button more than 2nds,the SELF CLEAN function is initiated.

Turbo function enables the unit to reach the preset temperature in the shortest time. When press this button on cooling mode, the unit will blow strong cooling air with super high fan speed. When press this button on heating mode(applicable to the unit adopts PTC only), the PTC will be energized and bring fast heating operation.

1

2

MODE

SWING

TEMP

SHORTC UT

FAN SPEED

TIMER OFF

RESET LOCK

LED FOLLOW ME

TIMER ON

TURBO SELF CLEAN

DIRECT

SLEEP FRESH

Un d er S E LF C LEA N mod e, t h e ai r c on dit ion er wi l l au t om ati cal ly c l ea n a nd d ry th e Eva po r at o r an d k ee p i t as f res h for t he n e xt o p er ati on.

TRUBO/SE LF CLEAN func tion