Midea R05/BGE, RM05/BGTE-A, RM05/BGE-A User Manual

Control System

USER MANUAL for RM05/BGE; RM05/BG (T) E-A

Remote controller specifications

Model R05/BGE; RM05/BG (T) E-A

Rated Voltage 3.0V(2 pieces of LR03 7# batteries)

Lowest Voltage 2.4V

Effective Distance 8M~11M

Operation Condition

-5℃~60℃

Performance Features

1. Operating Mode: COOL HEAT DRY FAN and AUTO.

2. Timer Setting Function in 24 hours.

3. Indoor Setting Temperature Range: 17°C ~30°C.

4. LCD (Liquid Crystal Display) of all functions.

5. Night Light Function

1.2.1 Parts name

1

5

7

9

6

8

11

10

2

4

1

3

15

13

12

14

16

TIME ON

TI ME OF F

CLOCK

SWIN G

AIR DIRE CTI ON

OK

ECO

SW I N G

MOD E

FAN
SPEED

M

AUTO

COOL

DRY

HEAT

FAN

TE M P

SET

SET

Control System

(1) Mode Button

Once pressing, running mode will be selected in the following sequence:

Notes: No heating mode for cool only type unit.

(2) FanSpeed

Fan speed will be selected in following sequence once pressing this button:

(3) Adjust button ▼

Decrease the set temp. Keeping pressing will decrease the temp with 1℃ per 0.5s.

(4) Adjust button ▲

Increase the set temp. Keeping pressing will increase the temp with 1℃ per 0.5s.

(5) ON/OFF button

For turning on or turning off the air conditioner.

(6) Air Direction

Activate swing function of air deflector. Once pressing, air deflector will turn 6℃. For normal operation and

better cooling and heating effect, deflector will not turn to the degree which is the state of deflector when the

unit is turned off (Only available when remote controller is used with corresponding unit.)

(7) Horiz Swing

Activate or turn off horizontal swing function. (Only available when remote controller is used with

corresponding unit.)

(8) Vert Swing

Activate or turn off vertical swing function. (Only available when remote controller is used with corresponding

unit.)

(9) Clock

Display the current time. (12:00 is displayed when resetting or electrifying for the first time.) Press CLOCK for

5s, icon indicating hour will flash with 0.5s. Press it again, and are used to adjust the figure. Setting or

modification is effective onlyby pressing OK button to make confirmation.

(10)Time ON

For time ON setting. Once pressing this button, the time will increase by 0.5 hour. When the set time

exceeds10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00 will cancel

time ON setting.

(11)Time OFF

For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the set time

exceeds10 hours, pressing the button will increase the time by 1 hour. Adjust the figure to 0.00 will cancel time

ON setting.

(12)Reset Button(inner located)

Press this button with a needle of 1mm to cancel the current setting and reset remote controller.

(13)Lock Button(inner located)

Press this button with a needle of 1mm to lock or unlock the current setting.

A UTO CO OL DR Y HEAT FAN → → → →

AUTO→LOW→MED→HIGH