Midea MVC-SC861R, MVC-SC861B Instruction Manual

Vacuum Cleaner
2 IN 1
MVC-SC861R & MVC-SC861B
Instruction manual
Made in China
Before using the device for the first time, please read the instructions through carefully and store them in a safe place. If the device is given to someone else, it should always be accompanied by these instructions. The manufacturer and importer will not accept liability if the directions in these instructions are not observed!
We reserve the right to modify the product, packaging or enclosed documentation at any time in conjunction with our policy of continuous development.
Symbols used in the manual:
Warning about hazards involving major risk.
Tips and recommendations are marked with this symbol.
Safety information
Proper use
The appliance is used to vacuum up the dust occurring in any home. It is only designed for
Warning about improper use
Under no circumstances should the appliance be used on the following:
Liquids or wet materials (e. g. carpet shampoo when wet) Glowing ash, cigarette ends, matches etc. Combustible or inflammable substances Very fine dust (e. g. concrete dust) or toner Hard, pointed objects such as large splinters of glass
Risk to children
Keep the appliance out of the reach of children. Improper use may result in injury or electric shock. Keep packaging away from children (risk of suffocation). This appliance is not des igned to be us ed by people (including children) with limited phys ical,
sensory or mental capabilities or people without adequate experience and/or understanding unless supervised by someone responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
Risk of electrocution
Never immerse the appliance in water or other liquids as there is a risk of electric shock. Never touch the appliance with wet hands. Do not use the appliance outside or in rooms with high
humidity levels.
When using the appliance as a handheld vacuum cleaner to clean cars, make sure it is not exposed
to rain or moisture.
Never vacuum up liquids. Only store the appliance indoors in a dry place. Immediately remove the power plug from the electrical outlet in the event of any damage or
malfunction.
CAUTION: Acute danger to life from electrocution! Never try to repair an electrical appliance
yourself. For your own safety take or send it in to your nearest customer service centre / specialist repair shop. This also applies to the power cable.
Do not use the appliance if there is damage to the cable, plug or the vacuum cleaner itself. Never drag on the power cable or carry the appliance by the cable. Always handle the power cable
with care. Make sure the cable does not get caught in doors or dragged over sharp edges or corners. Keep the cable away from hot surfaces.
Before connecting the appliance to the electrical outlet, make sure the voltage matches the
specifications on the nameplate of the appliance.
The appliance must be switched off when the power plug is removed or inserted in the wall outlet. Disconnect the plug from the wall outlet during storms. When removing the plug from the outlet, always pull on the plug and NOT the cable, Only touch
the plug with dry hands.
The appliance should never be used outside.
Risk of injury
Never hold the crevice nozzle close to the body or it may stick to the skin. If the nozzle does get
stuck, set the On/Off switch to immediately.
Caution when in use
After rinsing, the dust filter and motor protection filter must be completely dry before being
reinserted.
Only use the appliance again once it has been fully reassembled and both filters (dust filter
and motor protection filter) have been reinserted.
For your own safety, check the appliance for damage before use. If defective, the appliance should not be
used until it has been repaired by a qualified technician. If the power cord is damaged, it should be replaced by a qualified technician to avoid risk.
Once connected, the power cord should be placed so that no one can trip over them. Do not insert anything into the openings / nozzles of the appliance and make sure that they
do not become blocked.
Before changing nozzles, always switch the vacuum cleaner off beforehand. Never leave the appliance unattended when switched on. When interrupting work and after use switch the appliance off and unplug. Only use genuine manufacturer accessories.
Caution with malfunctions
Before checking the appliance for blockages or dealing with them, switch the vacuum cleaner
off and remove the plug.
Do not insert objects in the appliance: they might touch live parts. If liquids or foreign bodies get inside the appliance, unplug immediately. Have the appliance
checked before reusing.
Damage to property / appliance
Never place heavy objects on the appliance. Protect the appliance from heat, naked flame, direct sunlight and shocks. Do not drop the
appliance.
Caution when cleaning appliance
Clean the filters regularly, especially when you notice the suction has weakened. The motor might
otherwise become overloaded.
Always unplug the appliance from the wall outlet before cleaning. The dust filter and motor filter should not be cleaned in the washing machine. Always allow filters to dry in the air. Never use a hair dryer. Do not use caustic or abrasive products to clean the housing or you may damage the surface.
Warranty Terms
The following are excluded from the warranty: all defects caused by improper handling, damage or
unauthorized attempts to repair. The same applies for normal wear.
Length of Warranty: 90 days from date of purchase. Within 90 days from date of purchase, return product to place of purchase along with the original receipt.
List of parts
1. Handle
2. Top cord holder
3. Detachable rod handle
4. Power cord
5. Air outlet openings
6. Dust collector
7. Dust filter (in dust collector)
8. Unlocking button for dust collector
9. On/Off switch
10. Adapter
11. Bottom cord holder
12. Crevice nozzle
13. Floor nozzle attachment
14. Suction opening
3
7
2
1
4
5
9
6
10
8
11
13
14
12
Assembly
Conversion from handheld to floor vacuum cleaner
Remove all parts from the packaging and place carefully on a flat area. If necessary, put protective sheeting underneath to avoid harm to easily damaged surfaces. Carefully remove all packing materials. Compare the contents with the list of parts.
Using as a handheld vacuum cleaner
The 2 in 1 Vacuum Cleaner is ready for use as a handheld appliance as soon as it has been unpacked.
Using as a floor vacuum cleaner
1. Open the little flap on the handle of the handheld vacuum cleaner.
2. Insert the rod handle in the opening in the handle and push in as far as it will go.
3. Press the flap against the adapter so that it snaps into place.
Removing rod handle
4. Open the flap.
5. Pull out the rod handle.
6. Close the flap on the handle again.
Accessories
Fitting and removing nozzles
CAUTION
Before changing nozzles, always switch the vacuum cleaner off first.
When fitting nozzles, insert in the suction opening.
To remove nozzles, pull out of the suction opening.
Floor nozzle attachment
The floor nozzle attachment is suitable for both carpets and smooth floors.
Loading...
+ 14 hidden pages