Midea MTWM80 User Manual

Top Load Washer 8kg

USER MANUAL

MTWM80

CONTENTS

Safety information ........................................ 2

Identifying parts of the Washer ........................................ 3

Installation ........................................ 4-6

Control Features and Functions ........................................ 7-8

Wash Programs ........................................ 9

Wash Guide ........................................ 10-11

Cleaning & Maintenance ........................................ 12

Troubleshooting Guide ........................................ 13

Repairs, Service & Warranty ........................................ 14

Speciﬁcations ........................................ 15

SAFETY INFORMATION

Congratulations on your new Midea washer. This manual contains important information on the installation, use and care of your appliance. Please read this manual carefully before use. Follow instructions and keep the manual for future reference.

WARNING symbol

WARNING

The WARNING symbol indicates information that concerns your personal safety

CAUTION symbol

CAUTION

The CAUTION symbol indicates information on avoiding damage to the appliance

Safety precautions

- This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Young children should be supervised to ensure that they do not play with the appliance.

- Keep ventilation openings in the appliance enclosure or in the built in structure clear of obstruction.

- Choose a location that is indoors, completely dry and away from damp environments.

- The washer is designed to operate on a single phase power supply within a voltage range of

220~240V/50Hz.

- Please keep the appliance away from substances which could cause ignition.

- Do not store inﬂammable materials such as ether, benzene, LP gas and glue etc near the appliance.

- Do not splash water on the rear of the appliance, for it may cause malfunction or electric

shock.

- Before cleaning the appliance, always switch off and unplug it.

- Do not disassemble any part of the clothes washer.

- Do not insert your hand and remove items from the washer until it has come to a complete stop.

- Do not splash, wet or hose down the appliance. It is recommended to use a damp cloth when

cleaning the cabinet.

- Do not attempt to wash fabrics that contain latex or rubber material.

- Do not place items that have come in contact with any ﬂammable materials such as

petrol/gasoline, kerosene, cleaning solvents, vegetable oil, cooking oil or any explosive substances.

- Do not place heat sources (candle, heater, etc.) on top of or near the washer.

- Do not sit children or heavy object on top of the washer.

- Do not pull the power cord out of the power socket by the cord. Always unplug the washer holding

the plug.

- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualiﬁed persons in order to avoid hazard.

- When disposing of the appliance, do so only at an authorised waste disposal centre.

Safety of children

Packaging (e.g. wraps, polystyrene, etc.) can be dangerous for children. There is a risk of suffocation. Keep packaging materials away from children. Remember to dispose of old appliances in accordance with local laws. Pull out the mains plug, cut off the mains cable, break or remove spring or bolt catches if ﬁxed and ensure that children cannot lock themselves in the appliance when playing (there is risk of suffocation) or involve themselves in other dangers. Children cannot recogonise the hazard present in household appliances themselves, therefore it is very important for parents to make adequate supervision and never let children play with appliances.

IDENTIFYING PARTS OF THE WASHER

power plug & cord

top lid

control panel

frame

handle

cabinet

adjustable foot

Accessories

cold water inlet hose assembly hot water inlet hose assembly drain hose

INSTALLATION

Unpack the clothes washer

Remove the washer from the carton by lifting the carton away from the foam cushion

1. base.

Lift the washer lid and remove the accessories from inside the washer.

Ensure the foam cushion base is removed before installing the washer in place.

Level the clothes washer

adjustable foot

this way up

foam cushion base

The clothes washer can be levelled by adjusting the front two feet. Adjust the foot by turning clockwise to extend or anti clockwise to shorten. Slightly tilt the clothes washer back to access the adjustable foot. Ensure all four corners are ﬂat and level to the surface it is placed on. Ensure the clothes washer is level and stable prior to starting each wash. An unstable clothes washer can cause the drum to shake during a wash and knock against the cabinet.

INSTALLATION

Install & Fit the Drain Hose

Install the water inlet hose

water inlet hose

clamping nut

Slide the drain hose completely over the clothes washer drain outlet.

Fix in place securely to prevent leakage.

Fasten one end of the inlet hose to the tap. Ensure there is a rubber washer inside the hose before fastening. The washer prevents water leakage. Securely tighten the other end of the inlet

2. hose to the clothes washer inlet valve. Ensure the rubber washer is inside the hose before tightening.

When tightening the clamping nut, apply even pressure. Do not apply too much force or twist the valve as this may damage or break the valve joint.

CAUTION

PLEASE NOTE Be sure to install the correct HOT and COLD water inlet hoses. Incorrect installation can reduce performance or damage the clothes washer.

+ 14 hidden pages