Before using your washing machine, please read
this manual carefully and keep it for future reference.
Washing Machine
OWNER’S MANUAL
MT725B
Read This Manual
Inside you will find many helpful hints on how
to use and maintain your washing machine properly.
Just a l it tl e prev en ta ti ve care on your part can
save you a gr ea t deal of t im e and m on ey o ve r
the l if e o f your was hi ng machine. You'll find m an y
answers to c om mo n p ro bl em s i n t he chart of
troubleshooting tips. If you review the chart of
Tro ubl es ho oti ng Tip s first, yo u m ay n ot n ee d
to call for service.
Notes
Contents
Safety an d pre cautions ........ ... ........ ........ ... ........ ........ ... ........ ........ ... ....
Install ati on of the wash er....... ... ........ ........... ........ ........... ........ ........... ...
Prepara tio n before was hing....... ........ ........... ........ ........... ........ ........... ..
Parts ide nti fication o f the washer.... ........ ........... ........ ........... ........ .........
Instruc tion of the washe r operation pan el...... ... ........ ........ ... ........ ........ ...
Quick sta rt......... ........ ........... ........ ........... ........ ........... ........ ........... .....
The main wash... ........ ... ........ ........ ... ........ ........ ... ........ ........ ... ........ .....
Special f eat ures.... ........ ... ........ ........ ... ........ ........ ... ........ ........ ... ........ ..
About the pr oce dure of full a utomatic wash p rogram.. ... ........ ........ ... ........ ..
Cleanin g and M aintenan ce of the washing m achine..... ........ ........... ........ ........... ...
2
5
7
8
9
11
12
13
15
16
Safety and precautions
Observe the following items in order to prevent from injuring yourself, others
and the damage of property:
！
Warning
！
Caution
Please observe following contents of graphics.
！
This graphics represents(cause attention),and detailed
This indicates serious injury or death to human
being may be caused.
This will remind you that injury to people and
damage to property may occur.
cautions will be displayed inside the graphics.
This graphics represents (operation prohibited), and detailed
prohibitive items will be displayed inside the graphics.
This graphic represents (forcible execution), and detailed
forcible execution items will be displayed inside the graphics.
This appliance is not intended for use by persons (including
！
children) with reduced physical, sensory or mental capabilities,
or
lack
of experience and
given supervision
or instruction concerning
by a person responsible for their safety.
knowledge, unless they have been
use of the appliance
Children
should be
supervised to ensure that they do not play with the appliance.
！
Warning
Identify usual trouble of washer..............................................................................
Malfunc tio n display an d solutions.. ........ ... ........ ........ ... ........ ........ ... .......
Technical s pec ificatio ns......... ........ ........... ........ ........... ........ ........... ........ ......
1
17
18
18
Please do not disassembly
and assembly the
machine without
authorization.
No dismantling
Please do not install the machine in
damp and raining environment to avoid
electric shocking, catching fire, faults
and distortion
accidents.
小天鹅
No dampness
Please do not insert your hand
and take out clothes inside the
spin barrel before
it is fully stopped.
No touching
Please do not directly rinse the
machine with water when
cleaning.
小天鹅
No rinsing
2
！
Please do not let children climb the
machine or peer into the rotating
spin barrel to avoid accidents.
Warning
It is prohibited to wash the clothes
touching with kerosene, gasoline,
alcohol and other flammable materials.
Please use correct power source.
Please do not pull out or insert the
plug with wet hands to avoid electric
shocking.
Prohibited
Please do not damage power flexible
cord and power plug to avoid electric
shocking, short circuit and catching
fire.
Prohibited
Please pull out plug from the socket
if the machine is not in use.
Pull out the plug
Prohibited
Regularly clean the power plug to
remove dust and dirt to avoid contact
failure.
!
Please well connect the earth line of
socket to avoid electric shocking by
accidental leakage.
（earthing）
Earthing
!
！
Please ensure that the water inlet pipe
is connected and the tap is opened
before washing
clothes.
+
+
!
Customers are not allowed to change
the power line without permission.
Prohibited
Wet hands are
prohibited
Caution
The water temperature shall not exceed
50℃ when washing
with warm water.
Prohibited
It is strictly prohibited to place and sit
children or lay
weights on the
washer.
Prohibited
>50 C
小天鹅
小天鹅
Please insert the power plug tightly.
!
Please do not place on the washer
burning candle, mosquito-repellent
incense, cigarette and other
flammable things, as well
as electric stove, air
heating fan and other
heating
sources.
Smoke and fire prohibited
3
Please do not pull the electric cord
when pulling out the
plug.
小天鹅
!
Please do not wash down jacket,
raincoat, fishing coat and similar
clothes in the
washer.
Prohibited
4
Installation of the washer
Installation of the washer
Remove package
Remove package and take out the bottom board of
the cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion is
strictly forbidden.
Installation of drain hose
Completely sleeve the drain
hose over the sewer.
Fix and tighten it with a hoop.
( As shown in the figure )
Placement of water drain hose
Under3m
Under 15cm
If the water drain hose shall
be extended, its length shall
not exceed 3 meters,
otherwise it will affect the
water discharging time.
The placed height of water
drain hose shall not exceed
15cm.
FOR LOWE R DR AI N SY ST EM O NLY
Placement of upper water drain hose
The he ig ht of dra in h ose (“a”) sh ould be tw een 86-10 0 cm.
Diam et er of “b” sh uld not les s th an 3 cm, an d fl ow capaci ty
not le ss t han 40 L/ Mi n.
Befo re w ashin g ma chine sta rt s, user s ho uld hang up t he
drai n pi pe 86-1 00 cm height f rom the flo or.
FOR UP PE R DRAIN S YS TEM ONLY
Base foamed cushion
Do not bend the water
drain hose and place
it under the washer.
86~100 cm
Installation of water inlet pipe
+
+
+
+
1
2
Small ball
Push down the slide jacket
to expose the small balls and
enable separation of connector
socket from speedy connector.
4
A
B
Tightly screw another end of water inlet
hose on water inlet valve . (with rubber
seal ring inside).
Note: When tightening the clamping nut,
evenly apply the force and do not twist
the water inlet valve to avoid breaking of
water inlet valve joint.
+
+
5mm
Junk ring
The connection socket
consists of A and B two
parts. Before installation,
A and B two parts must
be unscrewed about
5mm, or directly
disconnected. If the
bore of water tap is
larger, remove the
plastic junk ring of
Connect
part A.
Connect: Push down the slide jacket
of speedy connector (4 small balls
must be exposed ),insert it into the
connection socket and then push
upward Release the connection
+
+
of water tap with speedy connector
completely. If it is required to feed
6
water, simply open the water tap.
Separate: Close the water tap, push
down the slide jacket of speedy
connector and pull out the speedy connector.
+
+
3
Unscrew four screws of part A
and sleeve part A horizontally
over the mouth at the end of
5
water tap (the mouth at the end
+
of water tap must be flat and
+
smooth. Flatten it by filing if it is
not flat) and push it upward with force making the rubber
washer firmly press the plane center of water tap mouth.
Then tighten the screw sequentially. After that, tightly
screw on part B.
+
+
7
Separate
Clamping nut
Water inlet hose
+
Installation of water inlet pipe
Put the water inlet pipe(which has
metallic filtering bag) screw on to the tap.
Tightly screw another end of water
inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the
clamping nut, evenly apply the
force and do not twist the water
inlet valve to avoid breaking of
water inlet valve joint.
Clamping nut
Water inlet hose
If the supply cord is damaged, it must be replaced by the
Only for m od el w it h single screw th re ad w at er i nlet pipe
manufacturer, its service agent or similarly qualified persons
！
in order to avoid a hazard. The instructions for appliances
connected to the water mains by detachable hose-sets shall
state that the new hose-sets supplied with the appliance are
to be used and that old hose-sets should not be reused.The
Only for m od el w it h do uble
scre w th re ad w at er inlet pipe
555
openings must not be obstructed by a carpet.This appliance
is for indoor use only.
666
6
Preparation before washing Parts identification of the washer
Adjust the adjustable foot to make
1
the washer be placed stable.
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Connect with to
3
power source.
Put down the drain
5
hose.
Gravity drain
Install the water
2
inlet hose.
For one inlet hose
For two inlet hoses
6
+
+
+++
+
Put in
clothes
and
suitable
amount of
washing
powder.
Water inlet valve
Door
Control panel
Top cove r
Cabinet
Adjustable foot knob
Turn on the
4
water supply.
+
+
NOTICE
！
Upper drain
Note:
The water
will overflow
when the
height of
the drain
hose under
860mm.
Before washing, please do take out coins,
keys and other hard goods, and zip up clothes
tightly to prevent them
barrel from damage.
and
7
86~100cm
Fixing ring (1) is used
for the fixing in time of
the installation of the
lower drain hose.
Only for lower drain hose
Please refer to the real material as the attachment
Accessories
Universal connector
Water inlet hose assembly
Onl y for mod el with s ingle
scr ew thre ad wate r inlet p ipe
Water inlet hose assembly
Onl y for mod el with d ouble
scr ew thre ad wate r inlet p ipe
8
Self-tapping screw
Base cover
Onl y for mod els inc ludin g base co ver
Instruction of the washer operation panel
Normal
Quick
Bulky
Tub clean
Program
Water level
Eight water levels are set
for this washer from 15L&19L
at the lowest level to
44L&48L at the highest level.
Jeans
Delicate
Mini wash
Air d ry
7 8
5 6
3 4
21
Water level
Child Lock
Soak
Was h
Rinse
Spin
Process
Start / Pause
[Start / Pause] button has both function of start
and pause. Continuously press this button, the
machine will be switched between start and
pause mode.
Start/Pause
ON/OFF
Program Selection
Before starting, continuously press this button for switching over
among [Normal], [Jeans], [Quick], [Delicate], [Bulky],
[Mini wash], [Tub clean] and [Air dry] programs.
Press [Program] & [Water level] at same time, all the
LEDs for soak time will be winking, display [Child Lock]
is working.This time, only power switch button is available.
Press [Program] & [Water level]] again, [Child Lock] will be
canceled.
9
Child Lock
Process
After power on, one light will flash
among the function of soak, wash,
rinse,and spin according to real
process.
Power
Power button has function
of open or close the power
supply.
10
Quick start
The main wash
1 Install the washing
machine
2 Load the laundry
3 measure out the
detergent
4 Close the
machine door
9 Press the
[start/pause] key
8 Select the desired
programme
7 Plug the power supply
6 Turn on the water tap
Instruction of the NORMAL program
! [Normal] wash program is the easiest, most convenient and most common washing
program. When the user press the power switch and then press [Start/Pause] button,
the normal washing program will start to work.
Normal program, suitable to wash clothes in spring, autumn, and winter.
Steps in details
1.Press t he switch.
2.Accor din g to the washi ng amount choos e the proper w ate r level.
3.Press S tart/Pause bu tton.
Instruction to single wash procedure
! User may freely select any single procedure, or any combination of procedures
among Wash, Rinse and Spin according to the actual requirements. It is only
required to turn off any one or two of these three indicators that not needed by the
user. And keep the indicator be on showing the process needed by the user.
! Single wash -- after switching on the power, turn off Rinse and Spin two indicators
by pressing these two keys. The operation for single rinse and single spin is similar.
! Single wash-spin – after switching on the power, turn off Rinse indicator by pressing
that key. The operation for single rinse-spin and single wash-rinse is similar.
“ON/OFF ”
5 Put down (hang up)
the drain pipe
Programme selection
Press t he “ON/OFF” bu tton.
1
Selec t the proper wat er level and other attached functions .
2
Press t he start/pau se key.
3
The wash stops
When th e wash stops, th e buzzer will buzz continuously for 6 tim es and
then th e power will be au tomatically cut off.
Turn off t he water tap.
Although the power can be cut off automatically, the power plug must be pull
out for the safety.
11
12
Special features Special features
Note:Close the lid of the door when machine is running, otherwise, it will automatically
stop working during spin process and send out abnormal warning.
The washer will not work when the filled water does not reach the set water level.
The selection of rinse water level: the level is equal to wash water level.
Press [Rinse Level] button, the indicator light which stand for rinse level flickered.
User can select the rinse water level according to needs. Rinse level exceed that
wash level all the time. It shows the wash level if not press this button. And only
show rinse level when rinse.
After pressing down [ Switch ], if the [Start / Pause ] button is not pressed,
the power will be automatically cut off after 10 minutes.
ON/OFF
JEANS
Water is stronger, suitable for washing cowboy with dirty clothes.
QUICK
Quick is used for washing the clothes not so dirty and the whole
program
washing process while use shorter.
DELICATE
Washing wool clothing. High water level of water level is optional, beat downy.
BULKY
Washing ability is strong, washing more the dirty clothes.
TUB CLEAN
Clean the tub.This program can prevent from crossing infection,including wash,rinse and
spin a whole process.
MINI WASH
Was hin g a few clothi ngs , low water le vel , high water l evel shall not ch oice.
AIR DRY
Air dry program is the special program of this washer. The spin barrel
circumgyrate in a high speed to make the outside of the barrel dryness. Controlling
the bacilli. Making the washing healthier.
Note: program This is used for dry the barrel and do not put the clothes in.
Energy te st pr ogram desc ription
Energy te st pr ogram oper ation:
1. Press th e “ON/OFF” swit ch,
2. Accordi ng to p rocedure s keys, choose BU LKY pro gram.
3. Adjust wa shi ng water qua ntity is highes t level,
4. Press th e start button
13
14
About the procedure of full automatic wash program
Cleaning and Maintenance of the washing machine
Contents
Program
Normal
Jeans
Quick
(ECO)
Delicate
Bulky
Mini wash
Tub clean
Air dry
Wash
Time
(minutes)
Spin
Time
(minutes)
Complete
Time
(minutes)
12 5 43 2
20
3
12
10
12
5
2
Only drain
2
5
2
63
13
35
39
43
4
5
Spray rinse
1 minute
Rinsing
Times
2
1
2
2
2
End of program
The was hin g ma chine will send off th e so und
" "
of dou-dou at the end of any program operation
to remind you to take out the laundry or operate
it again.
Aft er t he s oun d ,t he w ashing machi ne r etu rns
to its power-off state with no display and all lights off.
Please shut off the tap, pull out the plug when not
in use to avoid water leakage or the fire accidents.
Clean the water inlet
After long time use, the water inlet mesh bag may
be blocked with smudginess, and should be cleaned
according to the following steps:
1. Switch on the power, followed by shutting off the tap .
2. Let the washer works for 5 seconds so that water
flows into the tub through the water inlet hose. then
turn off the power.
3. Unload the water inlet hose and clean the mesh bag,
then restore the water inlet assembly.
Maintenance
Use gentle clothing to wipe off the water and dirt on
the surface each time after using the washing machine.
Detergent , propellant and
oth er chemic als are not
allowed to use so as to avoid
any damage to the plastic
accessories.
Clean Of the filter
After using the washing machine for a period, please clean
it according to the following steps:
1. Take out the lint filter.
2.Open the filter and wash it clean in the water.
3. Restore it and fix it.
(only for magic filter)
After using the washing machine for a period, clean it
according to the following steps:
1. Take off the lint filter.
2. Turn over the mesh bag and wash it clean in the water.
3. Restore and fix it.
(only for normal filter)
Note: The time required will also vary with water pressures of intake pipe, different clothes
textures and different water drain conditions.
Laundry capacity and water level setting
Model
MT725B
Water
level
Wei gh t of
laund ry (kg)
1 2 3 4 5 6 7 8
<0.6 1.2 1.8 2.4 3.0 3.6 4.2
15
5.0
Clean the lint filter in the drain pump (only for having drain filter)
1. Drain the water out of the
pump,under which use a
container to collect.
4. Clean the filter.
Notes:
If the drain filter is not cleaned at proper time (every 10 times of use),Drain problem could be caused.
2. Loosen the pump cover
anticlockwise.
5. Restore it and adjust the
convex place to align at
the pump hole.
3. Take out the l int fi lter.
6. Tighten the pump cover
clockwise.
16
Identify usual trouble of washer
Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine without
permission.
If the washer can not work normally, or appear abnormity or alarms, please check and
correct asfollows.
List of faults and inspection
Faults
No water
flows in
No
washing
! If the power is off or the fuse is burned out.
! If the water supply is cut off or the water pressure is too low.
! If the inlet hose is properly connected and the water tap is opened.
! If the filtering screen of inlet valve is blocked by dirt.
! If the coil of inlet valve is damaged. (The slight electromagnetic
sound is normal phenomenon when the inlet valve is switched on)
! If the "Start / Pause" button is pressed after the power
switch is pressed.
! If the power is off or the fuse is burned out.
! If the power supply voltage is too low.
! If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the
required water level)
! If it is set to "Delay" washing mode. (It will only start to work
until the reservation time reached)
Inspection Items
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine
without permission.
If the washer can not work normally, and the abnormal indication is shown in the nixie
tube window or the machine alarms, please check and correct as follows.
The lights of
Normal,Jeans
Open the lid when the
washer is spinning.
Soak and
44L,48L fla re .
The lights of
Quick,Delicate,
Was h an d
34L,39L fla re .
The lights of
Bulky,Mi ni
wash,Rinse and
24L,29L fla re .
The lights of Tub
clean,Air dry
,Spin and
15L,19L fla re .
6
6
Abnormal
draining
Abnormal
spin
! If the water drain hose is placed very high.
! If the end of water drain hose is sealed in pond.
! If the internal rubber ring of drain valve is blocked by dirt.
! If the door lid is closed.
! If all clothing piled largely at one side of barrel or the clothing
is excessively placed.
! If the washer is not placed in stable condition or it is placed in
inclination state. (The ground is not flat).
! If the motor belt is loosened.
Note: During the de spin process, if washing are piled at one side of the spin barrel,
it will cause unbalance of spin barrel resulting in striking. At this moment, the
computer inside the washer will feel this unbalance phenomenon and will automatically
correct it ( fill in water Washing ). However, if unbalance situation is not removed after
continuous three corrections, which means the computer auto-correction can not
resolve the problem. Then the user has to manually and evenly place the clothing
inside the barrel to solve the problem.
17
Technical specifications
Model
Rated power supply
Input power of motor
Rated washing capacity
Rated spin capacity
Overall dimensions
Application water pressure
Weight of whole machine
MT725B
220-240V~ 50/Hz
400W
7.0kg
7.0kg
515x525x900(mm)
0.1MPa~0.6MPa
29kg
18
Loading...