Washing Machine
OWNER’S MANUAL
MSW-1508P
Read This Manual
Use all instructions and explanations of
the installation before use. Follow the
instructions carefully. Keep the operation
instructions handy for later use. If the
application is sold or passed on then ensure
that the new owner always receives those
operation instructions.
CONTENTS
SAFETY INSTRUCTIONS
Safety instructions ....................................................
INSTALLATION
Product description ..................................................
Unpacking the washing machine ...............................
....................................
........................
.
OPERATIONS
...................................
......................................
Washing.............................................. ........
.....................
........
.
........
..................... ......
Maintenances
Cleaning and Care .....................................................
...........................................
............................ ....
T .......................... ..
.....
Technical specifications.............................................
Installation area ..................
Change the position of the drain hose
Control panel .........................
Preparation before washing
.............
Rinse ..................................................
Spin ..................................................................
Refer to the following table to select spinning time. ..
Reference of laundry quantity corresponding to different capacities..
Laundry volume and detergent dosage reference
Special features
Cleaning the cabinet .......
Cleaning the inlet filter ...............
Anti-freezing protection ...............
Operation when objects are dropped into the outside of the spin tub
Trouble shooting.......................................................
..............................
2
4
4
5
5
6
6
6
7
7
7
7
8
9
10
10
10
10
11
12
13
1
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
For your safety, the information in this manual must be followed
to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury or loss of life.
Explanation of the symbols:
！
Warning!
This combination of symbol and signal word indicates a potentially
dangerous situation which may result in death or serious injuries
unless it’s avoided.
Caution!
This combination of symbol and signal word indicates a potentially
dangerous situation which may result in slight or minor injuries
or damage to property and the environment.
Note!
This combination of symbol and signal word indicates a potentially
dangerous situation which may result in slight or minor injuries.
！
Warning!
This appliance is not intended for use by persons (including children) with reduced physical,
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
When choosing the water inflowing to wash tub or spin tub , please do not move the water
inlet valve during the process of water inflowing.
The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
The openings must not be obstructed by a carpet. If strong vibration occurs in time of spinning,
open the spin cover immediately. Make sure that the washing machine is placed on a flat and
stable floor ,and then adjust washing materials, distribute them evenly. To do spinning and draining
together, please spin for 1 minute before draining. Do not wash or spin waterproof clothes or
clothes that float easily to avoid abnormal vibration or damage to the clothes.
2
sensory
SAFETY INSTRUCTIONS
Do not di smant le t he mach ine
by your self.
For bid dis mantl ing
D
o n
o
t wa
s
wi
o
Do
or s
Do no
o
a
Do not p
it s
h c
th
ker
o
se
th
cc
n
er f
la
mm
a
n
ot
was
h
d
i
mil
ar cl
o
waterp roof
t le
t b
a
r
p l
a
y
n ea
r
i
d
en
t
.
u
t ha
t
op
pi
n
g ru
l
ot
h
e
s t
ha
e
,
p
et ro
l,
b
le s
u
bs
ta
o
wn
-
fi
l
le
d
t
h
es.
b
y cl
im
b t
run
n
i
n
g
n
d
s i
n
to th
nn
ing
.
！ ！ ！
t a
re st
a
in
a
lc
oh
ol
,
an
n
ce
.
coa
t, ra
in
c
o the m
ac
hi
t
ub
to
a
v
e tu
b b
e
f
This appliance is for indoor use only.
Do not install the machine in damp or rainy
environment to avoid electric shock, fire,
machine failure, or d efo rmation.
Do no t spray w ater d irect ly to the m achin e.
ed
Make su re that t he w ate r in let
d
hose is c onnec te d and the t ap
is open ed befo re w ashin g.
oa
t
+
n
e
If use wa rm wate r, t he wa te r
o
i
d
tempe ratur e sh ould no t
excee d 50℃.
o
r
e
Do not place inflamm abl e mat erials
like burning candle, mosquito incense,
cigaret etc. or heating source like electric
stove, calorifier etc. on the machine.
Do not let baby sit on it or place heavy
things on it.
Do not ex ceed th e ma x. wate r
level t o avoid w at er over flowi ng
and mac hine fa il ure.
！ ！！
+
To avoi d elect ri c shock
resul ting fr om e lectr ic leak age,
pleas e conne ct g round ing wir e
of the pl ug prop er ly.
Gro undin g
Wi
pe of
f d
i
r
ty an
d du
s
p
co
l
ug of
n
t
e
n t
o p
t
a
ct w
it
h p
r
e
owe
vent p
r s
t on the
o
o
upp
l
r
y.
If the supply cord is dam aged, it must
be replaced by the manu facturer, its
service agent or simi larly qualified
persons in order to avo id a hazard.
Do not in sert or u np lug the p lug
with we t hands t o av oid ele ctric
shock .
Insert the plug tigh tly w hen u se.
Unplug the plug from socket after use.
3
Do not replace power c ord b y
yourself.
Do not pu ll the co rd w hen
unplu g the plu g.
INSTALLATION
Product DescriptionProduct Description
Control panel
Lint filter
Wash cover
Wash tub
Pulsator
Base
Drain hose
Spin cover
Safety cover
Frame
Power plug
Cabinet
Or
Note!
• The product line chart is for reference only, please refer to real product as standard.
Accessories
Inner spin cover
Water inlet hose
manual
Unpacking the washing machineUnpacking the washing machine
！
Warning!
•
Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
•
There is a risk of suffocation ! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
44
INSTALLATION
Installation area
！
Warning!
Stability is important to prevent the product from
• wandering!
Make sure that the product should not stand on the power cord.
•
Before installing the machine, the location characterized
as
follows shall be selected:
1.Rigid, dry, level surface
2.Sufficient ventilation
and Avoid direct sunlight
, Room temperature is above 0 C
3.Keep far away from the heat resources such as coal or gas.
Change the position of the drain hose
The ex-factory installation position of the drain hose is located the spin side .
According to the installation site, the drain hose can also be at the wash
side of the machine . The method is as follows:
1,Unplug the power cord and empty water in the drain hose
completely.
2,Spread a piece of soft cloth on the floor (e.g. a blanket)
and place the washing machine on it gently.
Take the drain hose out from the buckle at the spin side,
3,
put it into the buckle at the wash side.
and
Hang up the drain hose kit.
4,
There are two ways to place the end of drain hose:
1.For lower drain system
installed
W> 2 0mm
at
Blanket
Drain hose
w
Front
w
Under3m
Under 15cm
wate r trough
2.For upper drain system
Trough
Hos e
Ret ainer
d
n
i
B
！
！
Warning!
Warning!
Do not kink or protract the drain hose.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
• If drain hose is too long, do not force it into machine as it will cause abnormal noises.
5
Max.100cm
Min .86cm
m
c
m
c
100
.
86
x
a
in.
M
M
OPERATIONS
Control Panel
5
35
Soak
Wash timer
Note!
Note!
• The product line chart is for reference only, please refer to real product as standard.
• The product line chart is for reference only, please refer to real product as standard.
Wash timer: be used to select required washing time.
●
Spin timer: be used to select required spinning time.
●
10
15
Wash selector
NormalNormal
HeavyHeavy
soft
Wash-Drain SelectorWash-Drain Selector
● Wash-Drain selector: For washing or rinsing, select “ Normal”or“ Heavy”. For
draining ,select “Drain”
● Water inlet: be used to inject water..
Preparation Before Washing
！
Warning!
•
The maximum gradient of the supporting surface for the washing machine should not exceed 2º.
•Do not tear down electrical wires and components in the machine by yourself.
•There are holes on the base for ventilation. These holes should not be blocked by
foreign objects (carpets, etc.).
•Never connect the grounding wire with the live wire, or it may lead to an electric shock.
•Check that there are no objects such as coins, hairpins, mud or sand in the pocket.
•Strings should be knotted in advance to prevent entanglement.
•Clothes can be classified for washing according to the texture, dirty degree and color.
•For small pieces (e.g.,stockings) or fluffy clothes, put them into a nylon net for washing.
Wash
Wash/Rinse
Rinse
Dra
i
n s
Drain
or
el
ector
Drain
Spin timer
Washing
Was
h in
l
e
Water inlet selector
Spinning
t s
el
e
ct
o
r
Plug in
Washing
Open the door
Add detergent
Put down the drain
Arrived after the water
level, close the tap
Open tap
Wash Wash
Rinse Rinse
Drain Drain
Choose was hing
function
Normal
Heavy
Choose was hing
program
Choose was hing
time
load and Close door
6
Drain
OPERATIONS
Rinse
Normal
Heavy
Choose was hing
program
Choose was hing
time
Open tap
Arrived after the water
level, close the tap
Wash Wash
Rinse Rinse
Choose was hing
function
Drain Drain
Spin
Shake out the laundry and
put them into the spin tub.
spin cover
Spin tub
Correct
Put the inner spin cover on .
Confirm the inner spin cover is placed
horizontally.
Incorrect
the laundry
Spin cover
Safety cover
Close the safety cover
and the spin cover.
Refer to the following table to select spinning time.
Washing
materials
Spin time
10.0kg Capacity about 20 pcs. about 15 pcs. abou t 10 pcs. ab out 6 pcs.
12.0kg Capacity about 24 pcs. about 18 pcs. abou t 13 pcs. ab out 7 pcs.
About 50
seconds
Reference of laundry quantity corresponding to
Reference of laundry quantity corresponding to
different capacities
different capacities
Laundry
Capacity
2.0kg Capacity about 4 pcs. about 3 pcs. ab out 2 pcs. about 1 pc s.
3.0kg Capacity about 6 pcs. about 4 pcs. ab out 3 pcs. about 1 pc s.
3.6kg Capacity about 7 pcs. about 5 pcs. ab out 4 pcs. about 2 pc s.
4.6kg Capacity about 9 pcs. about 6 pcs. ab out 5 pcs. about 2 pc s.
5.0kg Capacity about 10 pcs. about 7 pcs. a bout 5 pc s. about 3 p cs.
5.5kg Capacity about 11 pcs. about 8 pcs. a bout 6 pc s. about 3 p cs.
6.0kg Capacity about 12 pcs. about 9 pcs. a bout 6 pc s. about 3 p cs.
7.0kg Capacity about 14 pcs. about 10 pcs. about 7 p cs. abou t 4 pcs.
7.5kg Capacity about 15 pcs. about 11 pcs. about 8 p cs. abou t 4 pcs.
8.0kg Capacity about 16 pcs. about 11 pcs. about 8 p cs. abou t 4 pcs.
8.5kg Capacity about 17 pcs. about 12 pcs. about 9 p cs. abou t 5 pcs.
...... .. .... .. .... .... .. .... ..
Silk
Light clothes
About 1
minute
Shirt
about 500 g
Knitwear
(fiber)
(fiber/blended)
About 1-2
minutes
Underwear
(cotton)
About 2-3
minutes
Uniform
about 650 g
Slipover
(cotton/linen)
About 3-4
minutes
Jeans
about 900 g
Toweling coverlet
(cotton)
About 5
minutes
Jacket
about 1600 g
Drain
7
OPERATIONS
Laundry Volume and Detergent Dosage Reference
Fabric t ype
Synthetics,sil k,
Delicate fabrics
Cotton or linen
Heavy soils
Laundry
capacity( kg)
0-5.0
4.5-9.0
0-9.0
9.0-15.0
0-9.0
9.0-15.0
Water
level
Low
Mid
Mid
High
Mid
High
Water fl ow
Normal
Normal
Heavy
Wash tim e
(min utes)
3
3-5
7
7-10
10
10-35(soak 20)
Detergent
amount( g)
About 55
About 78
About 78
About 115
About 78
About 115
8
OPERATIONS
Special functions
For machines having the function only
Soak function
For seriously stained clothes, soak wash is useful to achieve better wash result.
15-35 minutes of the wash timer is for soak wash:(illustrate as follows)
35
abo ut 5 abo ut 5 about 5
abo ut 1.5 abou t 1.5 abo ut 2
Total: 35 (mins)
Work time
Buzzer function
Function of the buzzer is to alarm finish of washing, and it is helpful to control
wash process. Buzzer will alarm the completion of washing.
15
Sta tic tim e
(un it： )min s
Wash timer
35
Soak
5
10
15
9
MAINTENANCES
Cleaning And Care
Cleaning And Care
！
Warning!
• Before your maintenance starts, please unplug the machine and close the tap.
Cleaning the cabinet
Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Note!
Formic acid and its diluted solvents or equivalent are forbidden, such as
•
solvents or chemical products,etc.
alcohol,
Cleaning the Inlet Filter
Note!
• Inlet filter must be cleaned if there is less water.
Lint filter clean
Press the button head, and pull the lint filter out.
1.
Turn the filter net inside out, and rinse it in water.
2.
After inserting the claw, press the button to insert it into place.
3.
A sound of “ba” means proper installation.
4.
Button head
Claw
Anti-freezing Protection
To prevent from freezing:
Turn off the water tap, remove the water inlet hose and empty water in the
1. water
inlet
hose completely.
2.
Lay the drain hose and turn the drain selector knob to the "Drain”position to empty
the water in the tub.
If the water is frozen, please take the following steps:
1
.Put the water inlet hose into warm water of about 50℃.
2
.Keep about 2 liters of warm water below 50℃ in the wash
tub for about 10 minutes and then lay the drain hose and
turn the wash drain selector knob to the "Drain”position
to empty the water .
10
MAINTENANCES
3. Fit the water inlet hose and turn on the water tap to
confirm water filling and draining work properly.
Operation When Objects Are Dropped Into the
Outside of the Spin Tub
1.Remove all screws on the frame with a screw driver and
loosen the connector of the brake belt .
2.Pull up the frame with both hands and turn it backwards.
3.Take out the clothes dropped into the outside of the spin tub.
4.Fasten the connector of the brake belt ,Press the frame to
reset and tighten screws.
If the Following Symptoms Occur, Please Disconnect
The Power Plug And Perform The Following Checks:
Symptom
The washing
machine does
not work.
The drai n hose
does not work.
There is a bnorm al
noise during wash ing.
There is a bnorm al
noise and violent
vibration during
spinning.
Check that the power supply is in good condition.
●
Check that the power plug is inserted properly.
●
● Check that the wash t imer kn ob or the s pin tim er knob i s not
in the "0" position.
●
Check that the drain hose is not laid too high.
●
Check that the drain hose is not frozen.
●
Check that the drain hose is not blocked by foreign matter.
Check that there are no coins or any other foreign objects
●
dropped into the wa sh tub.
Check that the wash ing mac hine is p laced o n flat, s table f loor.
●
Check that clothes are evenly distributed in the spin tub.
●
Check that there are no wash ing mat erial s or foam ing deb ris
●
dropped into the outside of the spin tub.
Reason
Frame
Cabinet
11
MAINTENANCES
Technical Information
Technical Specifications
Power Supply
240V~,50Hz
Model
MSW-1508P
Standard Water Pressure
0.03Mpa 0.6MPa~
Washing Capacity
Wash
15.0 kg 9.0kg
Rated Po wer
Spin
520W 220W
Wash
Spin
Dimension
W*D*H mm)(
995*555*1155
Maximum Time
soak wash: 35 minwas h:15 mi n
Water vo lume
H:/M:/L:(L)
H:115 M78 L:55
Net
Wei ght
37.5kg
Spin:5 min.
Pump Rated
Power
/
12
Loading...