Midea MF-12FT17NB User Manual
Electric Fan
3 SPEED OSCILLATING TABLE FAN
MF-16FT17NB/MF-12FT17NB
English
Bahasa Melayu
中文
READ AND SAVE THESE INSTRUCTIONS
MIDEA.COM | 4008899315
CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING
1. If the supply cord is damaged, it must be replaced by manufacturer
or its service agent or a similarly qualified person in order to avoid
a hazard.
2. Indoor use only.
3. To protect against the risk of electrical shock, do not immerse the
unit, cord or plug in water or other liquid.
4. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety
Young children should be supervised to ensure that they do not
play with the appliance.
5. When the appliance is not in use and before cleaning, unplug the
appliance from the outlet.
6. When the fan was assembled, the rotor blade guard shall not be
taken off anymore.
7. Correct Disposal of this product
This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this
product for environmental safe recycling.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other object through the grille when fan is
running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid overturning.
4. DO NOT use fan in window, rain may create electrical hazard.
5. Household use only.
1
INSTALLATION INSTRUCTIONS
Name of components
Front grill
6
Lock nut of blade
Lock nut of blade
anticlockwise,
and then install the
front fan cover.
Motor shaft
Rear grill
2
Install by
aligning
Lock nut of grill
Screw the lock nut
of grill clockwise,
and in the meantime,
fix the rear grill.
Blade
Pull the blade to rotate after installing,
so as to ensure that the blade can be
normally rotated.
Oscillating
clutch knob
Motor
Pedestal
1
Chassis
Press the grill by hands in order.
Graphic position that the clip
of the front grill is aligned at
the rear grill.
Press the grill by hands
in order.
1
2
3
22
Self-buckled installation.
1
2
Mesh buckle
3
INSTRUCTIONS FOR USE
Body key
Oscillation adjustment
stop
oscillate
clutch
knob
Tilt adjustment
Manual
0 1 2 3
3
Loading...