Washing Machine
Washer Dryer
Washer Dryer
OWNER’S MANUAL
MODEL:
MF100D85B
Read This Manual
Use all instructions and explanations of the installation before use.
Follow the instructions carefully. Keep the operation instructions
handy for later use. If the application is sold or passed on then
ensure that the new owner always receives those operation
instructions.
CONTENTS
Safety Instructions
Safety Instructions ..................................................
Installation
Product Description ...............................................
Installation ..................................................................
Operations
Quick Start ..................................................................
Before Each Washing ............................................
Detergent Dispenser .............................................
Control Panel .............................................................
Option............................................................................
Other Functions ......................................................
Programmes...............................................................
Washing Programmes Table .............................
Maintenances
2
8
9
12
13
14
15
16
17
19
20
Cleaning And Care .................................................
Trouble Shooting ....................................................
Technical Specifications ....................................
1
2 1
24
25
SAFETY INSTRUCTIONS
Safety Instructions
• This appliance is not intended for use by
persons(includingchildren) with reduced
physical,sensory or mental capabilities or lack of
experience and knowledge unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to
be used and that old hose-sets should not be reused.
• The openings must not be obstructed by a carpet.
• This appliance is intended to be used in household
and similar applications such as:
− staff kitchen areas in shops, offices and other
working environments;
− farm houses;
− by clients in hotels, motels and other residential type
environments;
− bed and breakfast type environments;
− areas for communal use in blocks of flats or in
launderettes.
2
SAFETY INSTRUCTIONS
Safety Instructions
For your safety,the information in this manual must be followed
to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury or loss of life.
Explanation of the symbols:
！
Warning!
This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
death or serious injuries unless it’s avoided.
Caution!
This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries or damage to property and the
environment.
Note!
This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries.
！
Warning!
The electric shock!
3
SAFETY INSTRUCTIONS
• Before any maintenance the device, unplug the
appliance from the mains.
• Always unplug the machine and turn off the water
supply after use. The max. inlet water pressure, in
pascals. The min. inlet water pressure, in pascals.
• To ensure your safety, power plug must be inserted into
an earthed three-pole socket. Check carefully and make
sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices must
be connected by a qualified technician in accordance
with the manufacturer's instructions and local safety
regulations.
• Plug must be accessible after installation.
• Pull out its plug and cut off water supply after the
operation.
• Take care that power voltage and frequency shall be
identical to those of washing machine.
• Glass door may be very hot during the operation. Keep
kids and pets far away from the machine during the
operation very wet rooms as well as in the rooms with
explosive or caustic gas.
• Remove all packages and transport bolts before using
the appliance. Otherwise, serious damage may result.
• The washing machine with single inlet valve only can
be connected to the cold water supply. The product
with double inlet valves should be correctly connected
to the hot water and cold water supply.
4
SAFETY INSTRUCTIONS
• Do not use any socket with rated current less than that
of appliance.Never pull out power plug with wet hand.
Risk to children!
• Children of less than 3 years should be supervised to
ensure that they do not play with appliance.
• Animals and children may climb into the machine. Check
the machine before every operation.
• Kids should be supervised that they do not play with the
appliance.
Risk of explosion!
•
Do not wash or dry articles that have been cleaned in, washed
in, soaked in, or dabbed with combustible or explosive
substances( such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) This may result in
fire or explosion.
Before hand thoroughly rinse items of washing by hand.
•
Caution!
Installing the product!
• This washing machine is for indoor use only.
5
SAFETY INSTRUCTIONS
• It isn't intended to be built-in using.
• Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with explosive
or caustic gases.
• Remove all packages and transport bolts before using
the appliance. Otherwise, serious damage may result.
• The washing machine with single inlet valve only can be
connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.
• Plug must be accessible after installation.
Risk of damaging appliance!
• Your product is only for home use and is only designed
for the textiles suitable for machine washing.
• Do not climb up and sit on top cover of the machine.
• Do not lean against machine door.
• Cautions during Handling Machine:
1.Transport bolts shall be reinstalled to the machine by
a specialized person.
2.The accumulated water shall be drained out of the
machine.
3.Handle the machine carefully. Never hold each protruded
part on the machine while lifting. Machine door can
not be used as the handle during the conveyance.
4.This appliance is heavy. Transport with care.
5.A precaution indicates that the hands shall not be
inserted into running water-extracting tub.
6
SAFETY INSTRUCTIONS
6.A precaution indicates that the appliance shall not
be installed at a humid place.
• Please do not close the door with excessive forces. If it
is found difficult to close the door, please check if the
clothes are put in or distributed well.
• It is forbidden to wash carpets.
Operating the appliance!
• Before washing the clothes at first time, the product
shall be operated in one round of the whole procedures
without the clothes inside.
• Flammable and explosive or toxic solvents are forbidden.
Gasoline and alcohol etc.Shall not be used as detergents.
Please only select the detergents suitable for machine
washing, especially for drum.
• Make sure that all pockets are emptied. Sharp and rigid
items such as coin,brooch,nail,screw or stone etc. may
cause serious damages to this machine.
• Please check whether the water inside the drum has
been drained before opening its door.Please do not open
the door if there is any water visible.
• Be careful of burning when the product drains hot
washing water.
• Never refill the water by hand during washing.
• After the program is completed, Please wait for two
minutes to open the door.
7
INSTALLATION
Product Description
Water supply hose
Top cover
Contro l panel
Dete rgent dispenser
Door
Power supply cord
Service filter
Drain hose
Note!
• The product line chart is for reference only, please refer to real product as
standard.
Accessories
Drum
Transport
plughole
Supply hose
cold water
Owner’s manual
8
INSTALLATION
Installation
Installation area
！
Warning!
Stability is important to prevent the product from
•
wandering!
Make sure that the product should not stand on
•
the power cord.
Before installing the machine, the location characterized
as
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
！
Warning!
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
•
There is a risk of suffocation ! Keep all packaging
well away from children.
w
W> 2 0mm
w
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
Remove transport bolts
！
Warning!
You must remove the transport bolts from the backside before using the product.
•
You’ll need the transport bolts again if you move the , so make sure
• product
keep them in a safe place.
you
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
9
INSTALLATION
Levelling the washing machine
！
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
1
Raise
2
Lower
3
Lock nut
foot
Connect Water Supply Hose
！
Warning!
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between screw tap and inlet hose.
slide bushing
Tap with threads a nd inlet hose
Spec ial tap for washing mac hine
!
4
10
9
INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
wat er Inle t valve
wat er supp ly h ose
Drain Hose
！
Warning!
•
Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
1.Put it into the water trough.
Water
trou gh
2.Connect it to the branch drain pipe of
the trough.
m
0c
m
0
.
1
x
60c
n.
Ma
Mi
10
11
OPERATIONS
Quick Start
Caution!
Before washing, please make sure it’s installed properly.
•
Before washing at first time, the washing machine shall be operated in one
•
of the whole procedures without clothes in as follows.
round
1. Before Washing
1 2 3 4 5
Main
wash
Soften er
Prewash
Plug in
Open tap
Load
Close door
Add detergent
Note!
• Detergent only need to be added in "case I “after selecting pre-washing for
machines with this function.
2. Washing
1 2 3
Select Programme
Select function or
default
Start up
Note!
If default is selected, step 3 can be skipped.
• 1.
2.The function button line chart is for reference only, please refer to real product
as standard.
3. After Washing
Buzzer beep or “End” on display.
10
12
OPERATIONS
• The working condition of the washer should be(0-40)°C.If used under 0°C,the
inlet valve and draining system may be damaged. If the machine is placed under
condition of 0°Cor less, then it should be transferred to normal ambient
temperature to ensure the water supply hose and drain hose are not frozen
before use.
• Please check the labels and the explanation of using detergent before wash. Use
non-foaming or less-foaming detergent suitable for machine washing properly.
Before Each Washing
Check the label
Put small clothes into the
pillow slip
Take out the items out o f
the po cket s
Turn easy-pilling and
long-pile fabric inside out
Knot the long strips,zip or
button
Separate clothes with
different textures
！
alarm due to great unbalance. Therefore it is suggested to add one or two
more clothes to be washed together so that draining can be done smoothly.
• Don’t washing the clothes touching with kerosene, gasoline, alcohol and
other flammable materials.
Warning!
• When washing a single clothes, it may easily cause great eccentricity and give
10
13
OPERATIONS
Detergent Dispenser
I
Pre wash detergent
II
Main wash detergent
Softener
Pull out the dispenser
Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for product with this function.
Programme
Cotton 20℃
Cotton 40℃
Cotton 60℃
Hygiene 90℃
Jeans
Delicate
ECO 40-60
Spin only
Mean s must ○ Means opti onal
Programme
Wash and Dry
Dry Auto
Dry 90’
Dry 60’
Mix 30℃
Mix Cold
15’Wash
Note!
• As for the agglomerated or ropy detergent or additive, before they are
poured the detergent box, it is suggested to use some water for
dilution to prevent inlet of detergent box from being blocked and
overflowing while filling water.
•
Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.
into
the
14
10
OPERATIONS
Control Panel
1
1
4
1
5
1
3
2
Note!
The chart is for reference only, Please refer to rea l prod uct as standard.•
1
Off
1
Product is switched Power.
3
Option
This allows you to select an additional
function and will light when selected.
5
Display
The display shows the settings, estimated time remaining, options, and status messages
for your washer. The display will remain on through the cycle.
2
Start Pause/
1
Press
the button to start or pause the
washing cycle.
4
Programmes
Available according to the laundry type.
BA
E
DC
10
15
A
Door Lock
C
Pre Wash
Display
E
Wash Time De lay Time
Speed Error
End Temp.
B
Dry
D
Extra Rinse
OPERATIONS
Option
Pre Wash
The Prewash function can get an extra wash before main wash,it is suitable for
washing the dust rises to surface of the clothes;You need to put detergent into
the Case (I) when select it.
Extra Rinse
The laundry will undergo extra rinse once after you select it.
Delay
Set the Delay function:
1. Select a programme
2.Press the Delay button to choose the time(the delaying time is 0-24 H.)
3.Press [Start/Pause] to commence the delay operation
Delay
Choose the Programme
Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before
starting the programme. If the programme already started, should select
[Off] to reset the programme.
StartSetting time
Caution!
• If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme and when the power is
restarted, press the [Start/Pause]button the program will continue.
Programme Option
Delay
Cotton 20℃
Cotton 40℃
Cotton 60℃
Hygiene 90℃
Jeans
Delicate
ECO 40-60
Spin only
Pre
Wash
Extra
Rinse
Programme Option
Pre
Wash
Wash and Dry
Dry Auto
Dry 90’
Dry 60’
Mix 30℃
Mix Cold
15’Wash
Delay
Extra
Rinse
○ Mean s optional
16
10
OPERATIONS
Other functions
Child Lock
This function is meant to keep children from misusing the controls.
Extra
Rinse
Pre
Wash
Press [ Extra Rinse] and [Pre Was h] sim ultaneously for 3 sec
until the buzzer beep. The ch ild lo ck indicator switches on.
Caution!
When the Child Lock is activated, the display will alternately show “CL” and the
remaining time.
Pressing any other button will cause the Child Lock indicator to flash for 3 sec.
When the program ends, “CL” and “END” will alternate on the display for 10 sec,
then the indicator will flash for 3 sec.
The Child Lock deactivates the function of all buttons except the On/Off button and
the Child lock button!
Only the simultaneous pressing of the two buttons [Extra Rinse] and [Pre Wash] can
deactivate the Child Lock!
Please deactivate the Child Lock before selecting a new program!
Spin
Press the button to change the spin speed.
1400: 0-400-6 00-800-10 00-1200-1400
Programme Default Speed(rpm)
1400
Cotton 20℃
Cotton 40℃
Cotton 60℃
Hygiene 90℃
Jeans
Delicate
ECO 40-60
Spin only
1000
1000
1000
1000
1000
800
1400
1000
Programme Default Speed(rpm)
1400
Wash and Dry
Dry Auto
Dry 90’
Dry 60’
Mix 30℃
Mix Cold
15’Wash
1400
1200
1200
1200
1000
1000
800
Caution!
• When the li ghts of spin speed are off means t he spin speed is 0.
10
17
OPERATIONS
Mute t he buzzer
Delay
Start
To act the buzzer function, press the two buttons again for 3 seconds. The setting
will be kept
Caution!
Press the [Delay]&[Spin] button for 3sec.
the buzzer is mute.
until the next reset.
Spin
• MuAfter ting the buzzer function, the sounds will not be activated any more.
18
10
OPERATIONS
Programmes
Programmes are ava ilable according to the laundry type.
Hard-wearing textiles, heat-resistant textiles made of cotton or
Hygiene 90℃
Dry
Mix
Jeans
15' Wash
Spin Only
Wash and Dry
ECO 40-60
Delicate
linen.
Washing the baby’s clothes, it can make the baby's wear cleaner
and make the rinse performance better to protect the baby skin.
Select it to dry clothes, the temperature is different .The drying
time according to the load .
Mixed load consisting of textiles made of cotton and synthetics.
Specially for jeans.
Extra short programme approx, suitable for lightly soiled
washing as a small amounts of laundry.
Extra spin with selectable spin speed.
The standard energy program.
Default 40℃,not selectable,suitabale for laundry washing at
about 40℃-60℃.
For delicate, washable textiles, e.g. made of silk, satin, synthetic
fibres or blended fabrics.
Note!
• Reference to your product to select the programmes.
10
19
OPERATIONS
Washing Programmes Table
Programme
Cotton 20℃
Cotton 40℃
Cotton 60℃
Hygiene 90℃
Jeans
Delicate
ECO 40-60
Spin only
Wash and Dry
Dry Auto
Dry 90’
Dry 60’
Mix 30℃
Mix Cold
15’Wash
Load(kg) Default Time
8.5kg Wash/Dry
8.5
8.5
8.5
4.0
8.5
2.0
8.5
8.5
8.5/5.0
--/5.0
--/1.0
--/0.5
8.5
8.5
2.0
8.5
2:20
2:40
3:00
2:18
1:48
0:50
3:53
0:12
5:04
3:00
1:40
1:10
1:10
0:55
0:15
Note!
• The parameters in this table are only for user's reference. The actual parameters
maybe different with the parameters in above mentioned table.
10
20
MAINTENANCES
Cleaning And Care
！
Warning!
• Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Note!
•
Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol,
solvents or chemical products,etc.
Cleaning The Drum
The rusts left inside the drum by the metal articles shall be removed immediately
with chlorine-free detergents.
Never use steel wool.
Note!
• Don’t put laundry in the washing machine during the drum cleaning.
Cleaning The Door Seal And Glass
Wipe the glass and seal after each wash
to remove lint and stains. If lint builds up it
can cause leaks.
Remove any coins, buttons and other objects
from the seal after each wash.
10
21
MAINTENANCES
Cleaning The Inlet Filter
Note!
• Inlet filter must be cleaned if there is less water.
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Washi ng the filter in was hing machine:
1.S crew off the inl et pipe from the back side
of the m achine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
the brush
3.Use to cle an the filter.
4.Reconnect the inlet pipe.
Note!
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Clean The Detergent Dispenser
1.Press d own the arrow location o n softener cover in side the dispense r drawer.
2.Lift the c lip up and take out softene r cover and wash all grooves with water.
3.Resto re the softener cover a nd push the drawe r into positio n.
1
A
Pull out the dispenser
drawer with press the A
2
Clean the dispe nser
drawer under water
Clean inside th e recess
with an old toothbru sh
3
Insert the disp enser
drawer
Note!
Do not use alcohol,solvents or chemical products to clean the machine.•
10
22
4
MAINTENANCES
Cleaning The Drain Pump Filter
！
Warning!
Be careful of the hot water!
•
Allow detergent solution to cool down.
•
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
1
Open the lower cover cap
4
Open the filter by turning
to the counter clockwise
Rotate 90°C and pull out
the emergency drain hose,
and take off the hose cap
Remove extraneous matter
2
Emergency
drain hose
5
After water runs out,reset
the drain hose
6
Close the lower cover cap
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
3
23
10
MAINTENANCES
Trouble Shooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.
Descrip tion
Washing m achine
cann ot start up
Door can’t be
opened
Water leakage
Detergent residues
in the b ox
Indicator or display
does not light
Abnormal noise
Descrip tion
Reason
Door is not closed properly
Washer's safety
protection design is working
The connection between inlet
pipe or outlet hose is not tight
Detergent is dampened
or agglomerated
Disconnect the power
PC board or harness has
connection problem
Reason
Door is not closed properly
Water injecting
problem while
washing
Overtime water draining
Solution
Restart after the door is closed
Check if the clothes is stuck
Disconnect the power, restart
the product
Check and fasten water pipes
Clean up outlet hose
Clean and wipe the detergent
box
Check if the power is shut
down and the power plug is
connected correctly
Check if the fixing (bolts) have
been removed
it’s installed on a solid
Check
and level floor
Solution
Restart after the door is closed
Check if the clothes is stuck
Check if the water pressure is
too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Check if the drain hose is blocked
Water overflow
Others
Restart the washer
Please try again first, call up
service line if there are still
troubles
Note!
• or the display
After the check, activate the appliance. If the problem occurs
shows other alarm codes
again, contact the service.
10
24
MAINTENANCES
Technical Specifications
Power S upply
MAX.Current
Standard Water Pressure
Model
Power Supply
Washing Capacity
Drying Capacity
Dimension(W*D*H)
Weight
Rated Power
Drying Power
220-240V~,50Hz
10A
0.0 5M Pa~1MPa
MF100D85B
220-240V~,50Hz
8.5kg
5.0kg
595*565*850
74kg
2000W
1350W
H
W
D
25
10
QU ESTIONS OR COMM ENTS
Country
Contact C en ter
Web S ite
Tha il and
Mya nm ar
Cambodi a
Vie tn am
Philipp ines
Indones ian
Malaysia
Singapo re
+662107779 9
+0926 0367229
+8552 32 124 35
+180058 8863
+6328 86355 22
+628001 88852 3
+6039 22110 33
+622225 36
Th is p rodu ct i s RoHS compliant.
http: //ww w.mide a.com /th
https ://www.gbs .co m. mm/en/about/v sk/
http: //b luemide a.com
http; //vn .m idea. com
http: //ww w.mide aph.c om
http: //i d.midea .co m
https ://www.mid ea .co m/my/
https ://www.mid ea .co m/sg /
注:1.说明书版本号从V1.0开始计，每变更一次自动+1
1623 8000A *** **
2.虚线框内印刷物料编码,由供应商按照订单需求自行添加,字体:Arial,
大小:8pt,相对位置参照图号右对齐
3.此注意内容及虚线框无需印刷
V1.0
Loading...