Midea MEK17DW-W, MEK17DW-B User Manual

User Manual

Electric Cool Touch Kettle

MEK17DW-W

Please read the manual carefully before operating your product.
Retain it for future reference.

TABLE OF CONTENTS

Important Safeguards............................................................ 2-3

Names of main parts............................................................. 4

How to use........................................................................... 5

Cleaning................................................................................ 5-6

MEK17DW-B

IMPORTANT SAFEGUARDS

When using electrical appliances,basic safety precautions should
always be follwed,including the following:

Read all instructinons.

DO NOT touch hot surfaces. Use handles or knobs.
To protect against fire,electric shock and injury to persons,
DO NOT immerse cord,plugs,base or kettle in water or other liquid.
Never leave the appliance unattended when in use.
Close supervision is necessary when any appliance is used by or
near children.
Unplug from outlet when not in use ,no water in kettle,filling
water, moving kettle and before cleaning .Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
DO NOT operate any appliance with a damaged cord or plug or
after the appliance malfunctions,or has been damaged in any
manner. Call our toll-free Customer Assistance Number for
examination,repair or adjustment.
DO NOT use a base unit other than the one supplied.The use
of accessory attachments not recommended by the appliance
manufacturer may result in fire,electric shock or injury to persons.
DO NOT use ortdoors.
DO NOT let cord hang over edge of table or counter, or touch hot
surfaces.Always store excess portion of the power cord in the
compartment of the base unit.
Electric kettle must be operated on a flat surface. DO NOT place
on or near a hot gas or electric burner,or in a heated oven ,or on
the top of other electric appliances.
Always attach plug to appliance first, then plug cord into the wall
outlet .To disconnect,turn control to off, then remove plug from
wall outlet.

1

IMPORTANT SAFEGUARDS

To acoid circuit overload, do not operate another high wattage
appliance on the same circuit .
DO NOT fill kettle when positioned on base. Dry the water on the
bottom of the body before placing it onto the power base.
Be aware of steam being emitted from spout or lid especially
during refilling. DO NOT open lid during boiling cycle.
DO NOT use the kettle to heat anything other than water.
DO NOT fill above the “max” indication marking. DO NOT operate
kettle if water is below miniumum marking. lf the kettle is
overfilled, boiliing water may be ejected.
DO NOT insert any object into slots or holes of the kettle.
Open the lid with the release button only. Push lid down to
lock in place.
Scalding may occur if the lid is remove during the brewing cycles.
This appliance is for HOUSEHOLD USE ONLY.

DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS
ANY DAMAGE OR IF APPLIANCE WORKS INTERMITTENTLY
OR STOPS WORKING ENTIRELY.
Extension cords

A short power-supply cord is to be provided to reduce the risk
resulting from becoming entangled in or tripping over a longer
cord. Longer detachable power-supply cords or extension cords
are available and may be used if care is exercised in their use.
lf a longer detachable power-supply cord or extension cord is used,

DO NOT use appliance for other than intended use.

2

⑴The marked electrical rating of the cord set or extension
cord should be at least as great as the electrcal rating of the
appliance.

⑵The extension cord should be a grounding-type 3-wire cord.
⑶The longer cord should be arranged so that it will not drape

over the countertop or tabletop where it can be tripped over,
snagged, or pulled on.

lf this appliance has a polarized plug (one blade is wider than
the other).To reducethe risk of electric shock, this plug is
intended to fit into a polarized outlet only one way, lf the plug
does not fit fully into the outlet, reverse the plug, lf it still
does not fit.

DO NOT attempt to modify the plug in any way.

SAVE THESE INSTRUCTIONS.

Rational design,bring convenience and enjoyment to your life

Rapid boiling ,save time and energy for you.
Steam control to switch the kettle off after boiling.
Automatically cut off for boil-dry protection.
Thermostat of high quality.
360' rotational power base.
Stainless steel body.
Double wall kettle

IMPORTANT SAFEGUARDS

Brief introduction

3

1

2

7

3

4

5

6

Names of main parts

Kettle model

Model No.

Rated voltage

Rated power

Capacity

Dimensions

Weight

MEK17DW-W
MEK17DW-B

120V~60Hz 1500W 1.7L 8.8*6.14*9inch 2lb10oz

7. Power base

1. Lid 2. Switch/Light

4. Lid release button 5. Spout 6.Double wall

3. Handle

4

How to use

Cleaning

1. Fill the kettle with 0.5L white vinegar and the remainder with water
and allow to stand for over 1 hours ;

2. Empty the solution from the kettle. Wipe off the deposits remained
with damp cloth

For the first time to use or no use for a long time, it is recommended that
you fill to the maximum level mark with fresh tap water, boil and empty th
kettle at least
2 times to clear kettle of any tiny particles.DO NOT drink initial boiled water.

1. Press the lid lock on the handle , and you can open it.

2. Remove the kettle from the base to the filling place. Fill the kettle with
desired amount (no less than the minimum and no more than the
maximum.) Put back the lid; place the kettle back on the base unit.

3. Connect the plug into a power outlet (120V,AC), switch the kettle on by
pressing down the switch. The light will illuminate to indicate the kettle is
heating.

4. The kettle will automatically switch off once the water has boiled and the
neon light goes off.

5. Lift the kettle from the base, and you can pour out the water into
container.

To prolong the kettle’s life, please clean the mineral
deposits in the kettle regularly.
Always unplug from the plug socket and allow to cool
down before cleaning.
DO NOT use chemical, steel wool, or abrasive cleaners
to clean the outside of the kettle, as these will scratch
the surface and fade the outside color.

5

Cleaning

3. Fill the kettle with clean water, bring to boil and then discard the water.
Repeat and the kettle will be ready to use;

4. lf necessary, repeat the operations above for several times;

5. DO NOT immerse into water. The surface of the kettle may be wiped over
with a damp cloth and polished with a soft dry cloth.

6