Midea MDA60-V012, A0303-GB18 Service Manual

Tumble Dryer Machine

Service Manual

MDA60-V012/A0303-GB18

6.FAULT ALARM DISPLAY...........

8.DRYER EXPLODED FIGURE

5.1 Ordinary Information

5.2 The disassembly methods of Struts

5.3 Notice

4.6 Switch on the power source, press the “start/pause” button,

4.7 The dryer is running, open the door but the dryer still running

4.8 When the dryer is running, the air volume of outlet was little

4.9 The dryer keep running a long time while drying fewer clothes

4.10 The drum of the dryer cannot rotate efficiently

4.11 When you find the cabinet have current in the using process

4.12 The key doesn't work under the normal condition

1 ….........................................…………………............

2 OPERATIONAL ………………....................…...........…..........................................................

1.1 Safety Precaution …………………….…………………………………….............................

1.2 Warning ………………….…………………………………………………..........................

……………….……………………….......................

………………………............................................

SAFETY PRECAUTION

.......................

- 02 -

TABLE OF CONTENTS

……………………………………........

…………………………………………………………………………....................

3.SCHEDULE OF FAILURE AND MAINTAIN TREE

3.1 The Control panel not displayed after selecting the program

3.2 The drum not worked after selecting the program

3.3

Maintenance non-heating malfunction

3.4 Drum worked ，but the effect of drying is not good

3.5 Noise

3.6 Peculiar smell appears when the dryer is working

……………………………....................

...........……………….………………………......................

…………………………………….....................

……………………………….

4.PHENOMENON OF THE FAULT

……………….………………………..............................

4.1 The lamp of the control panel is showed ,when you press the power switch

4.2 Press the power switch andthe "start/pause" button, the lamp

is normal but the drum don't turn

4.3 When a long heating and drying, the clothing doesn't to be heated

4.4 Switch on the power source, press the power switch without pressing the”start” button, the dryer start running

4.5 Switch on the power source, the dryer start running

5.DISASSEMBLY INFORMATION FOR THE PRODUCT

……………………………………......................

…………......

………………………………...........

……..

the dryer doesn't work but alarm

.....……............

……………………………….....................

………………………………......................................

………………………………........................

………………………………......................................

……………………………….

……………………………….................................................................

………………………………....................................................

……………………………….....................................................................................

………………………………............................................

7.DRYER CIRCUIT DIAGRAMS

………………………………............................................

1.SAFETY PRECAUTION

To prevent injury to the user or other people and property damage, the following

.instructions must be followed

Incorrect operation due to ignoring instruction will cause harm or damage.

Before service unit, be sure to read this service manual at first.

Do not use a defective or underrated circuit breaker Use this appliance on a dedicated circuit.

There is risk of fire or electric shock.

For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized

.service center

Do not disassemble or repair the product, there is risk of fire or electric shock.

Always ground the product.

There is risk of fire or electric shock.

Install the panel and the cover of control box securely.

There is risk of fire of electric shock.

Always install a dedicated circuit and breaker.

Improper wiring or installation may cause fore or electric shock.

Use the correctly rated breaker of fuse.

There is risk of fire or electric shock.

Do not modify or extend the power cable.

There is risk of fire or electric shock.

Do not install, remove, or reinstall the unit by yourself (customer).

There is risk of fire, electric shock, explosion, or injury.

Be caution when unpacking and installing the product.

Sharp edges could cause injury, be especially careful of the case edges and the fins

on the condenser and evaporator.

For installation, always contact the dealer or an Authorized service center.

There is risk of fire, electric shock, explosion, or injury.

Do not install the product on a defective installation stand.

It may cause injury, accident, or damage to the product.

Be sure the installation area does not deteriorate with age.

If the base collapses, the dryer could fall with it, causing property damage, product

failure, and personal injury.

Take care to ensure that power cable could not be pulled out or damaged during operation.

There is risk of fire or electric shock.

Do not place anything on the power cable.

There is risk of fire or electric shock.

1.1 Safety Precaution

1.2 Warning

- 03 -

1.SAFETY PRECAUTION

Do not plug or unplug the power supply plug during operation.

Do not touch (operation) the product with wet hands.

Do not place a heater or other appliance near the power cable.

There is risk of fire and electric shock.

Do not allow water to run into electric parts.

It may cause fire, failure of the product, or electric shock.

Do not store or use flammable gas or combustible near the product.

There is risk of fire or failure of product.

Do not use the product in a tightly closed space for a long time.

Oxygen deficiency could occur.

If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect

supply cable.the power

There is risk of electric shock or fire.

Stop operation and close the window in storm or hurricane. If possible, remove the product

from the window before the hurricane arrives.

There is risk of property damage, failure of product, or electric shock.

Be caution that water could not enter the product.

There is risk of fire, electric shock, or product damage.

Turn the main power off when cleaning or maintaining the product.

There is risk of electric shock.

When the product is not be used for a long time, disconnect the power supply plug or

turn off the breaker.

There is risk of product damage or failure, or unintended operation.

There is risk of fire or electric shock.

- 04 -

Whether the PCB has alarm or not

whether the strap break off

change the strap

Whether the connection is well or not

Whether the connection is short or not

change the motor

whether the spring is well

change the spring

Change the connection wire

whether the axes is break off or not

change the axes

Whether the door is closed well or not

lose the door or change the door lock

whether the motor wrecked

3.SCHEDULE OF FAILURE AND MAINTAIN TREE

3.1 The Control panel not displayed after selecting the program

Whether the power socket has voltage or

check the fuse

Turn on the Timer, whether the voltage between electric shock is normal

Change the PCB kit

check whether the wiring harness assemble well or not

whether The filter is well or not

reliable the connection

3.2 The drum not worked after selecting the program

YES

NO NO

- 06 -

2.OPERATIONAL

check that whether has power source or not;

check that whether the power socket inserted firmly or not;

Check that whether the power switch is on or not;

Check that whether press the ”start/pause” button or not.

Symptom

Totally not worked

Suddenly stop in operation

the key stoke useless

The dryer run well, but the heater not worked

Whether the power source stopped if the power source stopped , the

program input could be canceled, it does not continue to work;

Please input the program again and run it again;

Whether the door is open or not.

After starting the program, it is just available in the period of

drying for both key stoke, if you want to change the setting, please

turn off the power, and set it again；

Check that whether the “child-lock” if so ,press

the ”heat” and “select ”at the same time.

Check that Whether retains the “air-dry”program or in the.

Check daily notice proceeding

- 05 -

+ 12 hidden pages

Midea MDA60-V012, A0303-GB18 Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual