Important Safety Instructions ..........................1-3
Installation Instructions
....................................
4-9
Normal Sounds
Air Conditioner Features 10-12
Care and Cleaning 12-13
Troubleshooting Tip 13-14
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
...............................................10
.............................
......................................
.....................................
IMPORTANT SAFETY INSTRUCTIONS
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your air conditioner
properly. Just a little preventive care on your part can save you a great deal of time
and money over the life of your air conditioner. You'll find many answers to common
problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting
Tips first, you may not need to call for service at all.
To prevent injury to the user or other people and property damage, the following
instructions must be followed. Incorrect operation due to ignoring of instructions may
cause harm or damage. The seriousness is classified by the following indications.
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Never do this.
WARNING
!!
Plug in power plug
properly.
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
!!
breaker and a dedicated
power circuit.
Incorrect installation may cause
fire and electric shock.
!!
!!
Always ensure effective
grounding.
Incorrect grounding may cause
electric shock.
!!
Unplug the unit if strange
sounds, smell, or smoke
comes from it.
It may cause fire and electric
shock.
!!
Keep firearms away.
It may cause fire.
!!
Ventilate room before operating air conditioner if there is
a gas leakage from another appliance.
Do not operate or stop the
unit by inserting or pulling
out the power plug.
It may cause electric shock or fire
due to heat generation.
Do not operate with wet
hands or in damp
environment.
It may cause electric shock.
Do not allow water to run
into electric parts.
It may cause failure of machine
or electric shock.
Do not use the socket if it is
loose or damaged.
It may cause fire and electric
shock.
Do not use the power cord
close to heating appliances.
It may cause fire and electric
shock.
Always do this.
Do not damage or use an unspecified power
cord.
It may cause electric shock or fire.
If the power cord is damaged, it must be replaced by the
manufacturer or an authorised service centre or a similarly
qualified per son in order to avoid a hazard.
Do not direct airflow at room occupants only.Always install circuit
This could damage your health.
!!
Do not modify power cord length or share the
outlet with other appliances.
It may cause electric shock or fire due to heat generation.
Do not open the unit during operation.
It may cause electric shock.
Do not use the power cord near flammable gas
or combustibles, such as gasoline, benzene,
thinner, etc.
It may cause an explosion or fire.
Do not disassemble or modify unit.
It may cause explosion, fire and, burns.
It may cause failure and electric shock.
1
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
When the air filter is to be
removed, do not touch the metal
parts of the unit.
It may cause an injury.
Do not use strong detergent
such as wax or thinner but use
a soft cloth.
Appearance may be deteriorated
due to change of product color or
scratching of its surface.
!!
Stop operation and close the
window in storm or hurricane.
Operation with windows opened
may cause wetting of indoor and
soaking of household furniture.
!!
Always insert the filters securely.
Clean filter once every t wo w eeks.
Operation without filters maycause
failure.
Do not put a pet or house plant
where it will be exposed to direct
air flow.
This could injure the pet or plant.
Do not clean the air conditioner
with water.
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
!!
When the unit is to be cleaned,
switch off, and turn off the circuit
breaker.
Do not clean unit when power is on
as it may c ause fi re an d el ectric sh ock,
it may cause an injury.
!!
Hold the plug by the head of the
power plug when taking it out.
It may cause electric shock and
damage.
!!
Ventilate the room well when
used together with a stove, etc.
An oxygen shortage may occur.
Do not use for special purposes.
Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects.It may
cause deterioration of quality, etc.
!!
!!
Ensure that the installation bracket of the
outdoor appliance is not damaged due
to prolonged exposure.
If bracket is damaged, there is
concern of damage due to falling
of unit.
!!
Turn off the main power
switch when not using the
unit for a long time.
It may cause failure of product or
fire.
Do not place obstacles around
air-inlets or inside of air-outlet.
Do not place heavy object on the power
cord and ensure that the cord is not
compressed.
It may cause failure of appliance
or accident.
!!
Use caution when unpacking and
installing. Sharp edges could cause injury.
There is danger of fire or electric
shock.
!!
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate
supply by taking the power-plug out and contact a
qualified service technician.
CAUTION
This appliance is not intended for use by persons
(including children) with reduced physical ,sensory
or mental capabilities or lack of experience and
knowledge, unless t hey h aveb eengi vensu pervision
or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
2
Do not drink water drained
from air conditioner.
It contains contaminants and
could make you sick.
The appliance shall be installed in accordance
with national wiring regulations.
Do not operate your air conditioner in a wet room
such as a bathroom or laundry room.
The appliance with electric heater shall have at
l east 1 m eter s pace to th eco mbustible materials.
Contact the authorised service technician for
repair or maintenance of this unit.
Contact the authorised installer for installation
of this unit.
IMPORTANT SAFETY INSTRUCTIONS
NOTE:
The power supply cord with this air
conditioner contains a current detection
device designed to reduce the risk of fire.
Please refer to the section Operation
of Current Device for details.In the event
that the power supply cord is damaged,
it cannot be repaired-it must be replaced
with ac ordf romt heP roductM anufacturer.
WARNING
Avoid fire hazard or electric shock. Do not
use an extension cord or an adaptor plug.
Do not remove any prong from the power
cord.
Grounding type wall
receptacle
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.
Power supply cord
with 3-prong grounding plug
and current detection device
WARNING
For Your Safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance.
WARNING
Prevent Accidents
To reduce the risk of fire, electrical shock, or injury to persons when using your
air conditioner, follow basic precautions, including the following:
Be sure the electrical service is adequate for the model you have chosen. This
information can be found on the serial plate, which is located on the side of the
the cabinet and behind the grille.
If the air conditioneri s t o b e in stalled in a w indow, yo u w ill pr obably w ant to cl ean
both sides of the g lass f irst.I f th e w indowis a tri ple-track ty pe w ith a sc reen pa nel
included, remove the screen completely before installation.
Be sure the air c onditionerh as b een s ecurely a nd c orrectly in stalled a ccording to
the installation instructions in this manual. Save this manual for possible future
use in removing or installing this unit.
When handling the air conditioner, be careful to avoid cuts f rom s harp m etal f ins
on front and rear coils.
WARNING
Electrical Information
The complete electical rating of your new room air conditioner is stated on the
serial plate. Refer to the rating when checking the electrical requirements.
Be sure the air conditioner is properly grounded. To minimize shock and fire
hazards, proper grounding is important. The power cord is equipped with a
three-prong grounding plug for protection against shock hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the
wall receptacle you intend to use is not adequately grounded or protected by a
time delay fuse or circuit breaker, have a qualified electrician install the proper
receptacle. Ensure the receptacle is accessible after the unit installation.
Do not run air conditioner without side protective cover in place.This could
result in mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.
Operation of Current Device
(Applicable to the unit adopts current detection
device only )
The power supply cord contains a current device that senses
damage to the power cord. To test your power supply cord do
the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug
head. Press the TEST button, you will notice a click as the
RESET button pops out.
3. Press the RESET button, again you will notice a click as
the button engages.
4. The power supply cord is now supplying electricity to the
unit. (On some products this it also indicated by a light on
the plug head.)
NOTE:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for
correct operation.
The power supply must be replaced if it fails reset when
either the TEST button is pushed, or it cannot be reset. A
new one can be obtained from the product manufacturer.
If power supply cord is damaged, it cannot be repaired. It
MUST be replaced by one obtained from the product
manufacturer.
NOTE:This air conditioner is designed to be operated
under condition as follows:
OO OO
Cooling
operation
Heating
operation
Outdoor temp:
Indoor temp:
Outdoor temp:
Indoor temp:
64-109 F/18-43 C (64-125 F/18-52 C
for special tropical models)
O
62-90 F/17-32 C
O
23-76 F/-5-24 C
O
32-80 F/0-27 C
O
O
O
Note: Performance may be reduced outside of these
operating temperatures.
3
INSTALLATION INSTRUCTIONS
CAUTION
To avoid risk of personal injury, property damage, or product damage due to the weight of this device
and sharp edges that may be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are
needed to move and install the unit.To prevent injury or strain, use proper lifting and carrying
techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of
the unit over.
Handle air conditioner with care. Wear protective gloves whenever lifting or carrying the unit. AVOID
the sharp metal fins of front and rear coils.
Make sure air conditioner does not fall during installation.
Tools and Parts:
Gather the required tools and parts before starting installation. Read and follow the instructions
provided with any tools listed here.
TOOLS NEEDED
Flat-blade and Phillips screwdrivers
Level
Tape measure
Drill and 3/16 , 1/8 , 3/32 , or smaller drill bit
Through-the-wall Installation:
In addition to the tools listed above, the following tools are needed for through-the-wall installation.
TOOLS NEEDED
Saw
1 (2.5 cm) or thicker lumber
Caulk
#10 X 1 wood screws (7)
Parts Supplied:
Check that all parts are included in parts package:
Hardware
Phillipsscrews
round - head
Phill ips
pan - head
or
screws
pan - head
screws
Qty.
3
1
2
7
5
Hardware
Top channel
Window sashseal
Foam seal
Qty.
1
1
1
side curtains
Window lock bracket
2
Safety Lock
(for Vinyl-Clad window)
1
2
weather seals
5
FAN
TIMER
E
CLOCK
F
CANCEL
LED
LOCK
SET TEMP.SET TEMP.
RESET
CLOCKCLOCK
AUTO
SLEEP
ON ON
FAN SPEEDFAN SPEED
OFF OFF
FOLLOW ME
MODE
CLEAN AIR
ENERGY SAVER
Remote Control
1
Remote Battery
2
4
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.