Midea AMS150-PB User Manual

BLADELESS DC FAN
AIR PURIFIER

Model: AMS150-PB

EN
SP

USER MANUAL

Warning Notice: Before using
this product, please read this
manual carefully and keep it for
future reference. For additional
support, please call customer
service at 866-646-4332.

The design and specifications are
subject to change without prior
notice for product improvement.
Consult with your dealer or
the manufacturer for details.

AMS150-PB

READ AND SAVE THESE INSTRUCTIONS

SAFETY PRECAUTIONS .............................2

IMPORTANT SAFETY INSTRUCTIONS .. 3

RULES FOR SAFE OPERATION ................ 4

PRODUCT INTRODUCTION ...................... 5

INSTALLATION INSTRUCTIONS ................... 6

INSTRUCTIONS ............................................ 7

USER SERVICING INSTRUCTIONS ........ 10

PRODUCT PARAMETER ............................ 11

CLEANING ................................................... 11

SERVICE AND SUPPORT ........................... 11

Read This Manual

Inside you’ll find many helpful hints on how to use and maintain your appliance
properly. Just a little preventive care on your part can save you a great deal
of time and money over the life of your appliance. You’ll find many answers
to common problems in the troubleshooting tips - you should be able to fix
most of them quickly before calling customer service. These instructions may
not cover every possible condition, so attention to safety details is required
when operating and maintaining this product.

SAFETY PRECAUTIONS

To prevent injury to the user or other people and property damage, the
instructions shown here must be followed. Incorrect operation due to ignoring
of instructions may cause harm or damage. The different levels of risk is shown
by the following indications.

WARNING

CAUTION

NOTICE

 Page 2 

This symbol indicates a hazardous situation which, if
not avoided, could result in death or serious injury.

This symbol indicates a hazardous situation, which, if
not avoided, could result in minor or moderate injury.

This symbol addresses practices not related to physical
injury.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

WARNING

• This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to
defeat this safety feature.

• WARNING—To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.

• This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse
rating) and check the product. If the replacement
fuse blows, a short-circuit may be present and the
product should be discarded or returned to an
authorized service facility for examination or repair.
a) Do not operate any fan with a damaged cord or

plug. Discard fan or return to an authorized service
facility for examination or repair.

b) Do not run cord under carpeting. Do not cover

cord with throw rugs, runners, or similar coverings.
Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it
will not be tripped over.

• Do not leave the fan running unattended.

• Keep electrical appliances out of reach from
children or infirm persons. Do not let them use the
appliances without supervision.

 Page 3 

IMPORTANT SAFETY INSTRUCTIONS

WARNING

• If the supply cord is damaged, it must be replaced by
manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.

• This product complies with the maximum allowable
concentration of ozone of 0.050 parts per million by
volume (ppmv) in a 24-h period.

• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.

• When the fan was assembled, the rotor blade guard
shall not be taken off anymore.

- Prior cleaning unplug the fan.

- The rotor guard shall not be dissembled/opened to

clean the rotor blades.

- Wipe the fan enclosure and rotor blade guard with

a slightly damp cloth.

• CAUTION: HIGH VOLTAGE INSIDE.

• CAUTION: This equipment should be inspected
frequently and collected dirt removed from it
regularly to prevent excessive accumulation that may
result in flashover or a risk of fire.

RULES FOR SAFE OPERATION

• Never insert fingers, pencils, or any other object through the grille when fan
is running.

• Disconnect fan when moving from one location to another.

• Be sure fan is on a stable surface when operating to avoid overturning.

• DO NOT use fan in window, rain may create electrical hazard.

• Household use only.

 Page 4 

PRODUCT INTRODUCTION

Note:

Pictures in the manual are for reference only, and real objects within the
packaging box will prevail in the end.

1

2

3
4

5

6

NO. Description NO. Description

1 Top cover

2 Air outlet

3 Display and Control panel

4

Center piece

Base

5

Remote Control x 1

Instruction × 1

7 78 89

6 Adapter

7

8

9 HEPA filter

HEPA Filter ×2

9

Air inlet grille

Pre-filter

Adapter×1

 Page 5 

INSTALLATION INSTRUCTIONS

1. Remove the air inlet grille.

2. Take out the pre-filter.
Press the raised part on
both sides to pull it
outwards and take out the
pre-filter.

3. Remove the protective film
of the filter.

4. Install the HEPA filter.

5. Install the pre-filter. Align
the slot position at the
bottom and buckle up the
upper U-shaped buckle.

6. Install the air inlet grille.
Align the upper two
buckles and press them
tightly, then press the two
sides at lower part, slowly
and gently buckle the air
inlet grille.

7. Install the adapter,Tighten
the plug with the socket
position of the base.

1

Buckle

3 4

5 6

7 8

2

Buckling
position

8. Plug power supply.

•

It is recommended to clean the filter once every two weeks and replace
it once every six months (the cleaning and replacement cycle can be
adjusted according to the use environment).

 Page 6 

INSTRUCTIONS

F

Control and display panel

Button

Function Description

Startup/Standby

Touch this button to switch the wind mode among nor
(When the filter replacement reminder light is on, press and hold this button to turn off the reminder light)

Touch this button to start/stop the swing.

Touch this button to switch the wind speed (cycles among level 1-2-3-•••-10-1-2).

Schedule to shut down in the power-on state, and schedule to start up in the standby state;
Touch this button to set the timer (the display cycles among 0-1-2-•••-12-0h); 0h means that the timer is
canceled.

Filter replacement reminder icon; when the icon stays on, the filter needs to be replaced;

In AI smart wind mode, the indicator light is on, and the wind power is automatically adjusted
according to changes in ambient temperature.

This indicator light is on in sleep wind mode.
Start the sleep wind function, and the fan automatically adjusts the level according to the program; there
are three levels: 1, 2 and 3; you can adjust the level of the sleep wind by pressing the wind speed button.

F

Displays the wind speed level or set timer, and displays the temperature in the wind mode.

This indicator light is on in ion wind mode.
In this mode, plasmacluster is turned on, and level 1~10 wind has plasmacluster.

 Page 7 

INSTRUCTIONS

Additional Features and Maintenance

• Forced shut down
There is no operation during the running of the fan, after 15 hours of
continuous operation, the fan will be forced to shut down automatically.

• Intelligent memory
When the fan is turned off or powered off, it will run in the state before
turning off or power off when the power is powered on again (the timing
function is not memorized).

•

Screen-off function
In case of no operation for 30 seconds during normal operation, the
indicator light on the body will be automatically off, but the fan will
continue to operate. Press the ON/OFF button to turn off the fan when
the screen is off, and press the other button to restore display.

Remote control button description

Note:

• The remote control should be normally used on the front of the product
and 30 degrees of the deviation angle.

• The battery contains many heavy metals, acids and bases, etc., which
may threaten human's health; Waste batteries should be recycled
separately.

Startup or shutdown
oscillating

Press “+, -” to set the wind
speed or timing time

 Page 8 

Startup/Standby

Switch the wind type

Set the timed shutdown/
reserved startup