PS536 Parts
Gas & Electric
European Export
PME-15-004
Rev. B V1 4/01
PS536 Electric Ovens
PARTS MANUAL
for European export ovens
© 2001 Middleby Marshall, Inc.
is a registered trademark of Middleby Marshall, Inc. All rights reserved.
Middleby Cooking Systems Group 1400 Toastmaster Drive Elgin, IL 60120 (847)741-3300 FAX (847)741-4406
1
Europe
PS536 Electric
TABLE OF CONTENTS
Section Page
I. KEY SPARE PARTS KIT ............................................................................................................................... 3
II. INSTALLATION KIT ........................................................................................................................................ 4
III. TOP PANEL, BASE PAD, LEGS, AND STACKING COMPONENTS ............................................................. 6
IV. PANELS, END PLUGS, AND WINDOW ........................................................................................................ 8
V. CONTROL COMPARTMENT ........................................................................................................................ 10
VI. BLOWER ASSEMBLY................................................................................................................................. 12
VII. STANDARD SINGLE-BELT CONVEYORS, TYPE 1 AND TYPE 2 (STD) ..................................................... 14
Type 1: Produced through 3/01. 60" (1524mm) long, non-folding after assembly, center tension adjustment
Type 2: Produced 4/01-current. 60" (1524mm) long, folding, center tension adjustment
VIII. STANDARD SPLIT-BELT CONVEYORS, TYPE 1 AND TYPE 2 (STD) ........................................................ 16
Type 1: Produced through 3/01. 60" (1524mm) long, non-folding after assembly, center tension adjustment
Type 2: Produced 4/01-current. 60" (1524mm) long, folding, center tension adjustment
IX. CUSTOMER-SPECIFIC SINGLE BELT CONVEYOR, TYPE 3 (OGN) .......................................................... 18
Type 3: Produced 3/01-current. 60" (1524mm) long, folding, center tension adjustment, external bearings
X. CUSTOMER-SPECIFIC SINGLE BELT CONVEYOR, TYPE 4 (SCH) .......................................................... 20
Type 4: Produced 4/01-current. 60" (1524mm) long, folding, endplate thumbscrew tension adjustment
XI. CUSTOMER-SPECIFIC SINGLE BELT CONVEYOR, TYPE 5 (MCD) .......................................................... 22
Type 5: Produced 4/01-current. 76" (1930mm) long, non-folding after assembly, endplate thumbscrew tension adjustment
NOTE: Throughout this Parts Manual, the following abbreviations are used:
PS536 Electric
Europe
A/R = Quantity As Required
N/A = Does Not Apply
WARNING
FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly
before installing or servicing this equipment.
WARNING
DISCONNECT THE OVEN FROM ITS ELECTRICAL POWER SUPPLY BEFORE SERVICING.
NOTICE
Using any parts other than genuine Middleby Marshall factory manufactured parts relieves the manufacturer
of all warranty and liability.
NOTICE
Middleby Marshall (Manufacturer) reserves the right to change specifications at any time.
2
I. KEY SPARE PARTS KIT
ITEM QTY. P/N DESCRIPTION
1 1 44783 DIGITAL TEMPERATURE CONTROLLER
2 1 44695 CONVEYOR DRIVE MOTOR W/PICKUP ASSY.
3 2 30153 DRIVE MOTOR BRUSHES
4 1 37337 KIT, CONVEYOR SPEED CONTROLLER
5 1 33985 KIT, THERMOCOUPLE
6 1 44687 MOTOR, BLOWER
7 1 44685 BELT, BLOWER
8 1 33983 HIGH LIMIT CONTROL MODULE, 230V
9 1 97525 AXIAL COOLING FAN, 230V
10 1 39530 AIR SWITCH, 230V
11 1 44585 RELAY AND HEAT SINK ASSEMBLY
12 3 44701 FUSE, 60A
13 1 45281 HEATING ELEMENT, 380V, 8kW
Europe
PS536 Electric
3
PS536 Electric
Europe
4
II. INSTALLATION KIT
OVENS WITH TYPE 3 (SCH) CONVEYOR
OVENS WITH TYPE 4 (OGN) CONVEYOR
NOTE: These casters are provided to allow the oven to be more easily moved to the
installation location, and are NOT suitable for use as part of the oven installation.
OVENS (EUROPEAN EXPORT MODELS)
Europe
PS536 Electric
QTY. QTY. QTY.
1 1 2 3 42882 TOP PANEL
ITEM SINGLE OVEN DOUBLE OVEN TRIPLE OVEN PART NO. DESCRIPTION
2 2 2 2 220352 SCREW, PAN HEAD #10 X 1" (TOP PANEL - FRONT)
3 2 2 2 3A80A8801 SCREW, PAN HEAD #10 X 2" (TOP PANEL - REAR)
4 -- 1 2 44837 STACKING PANEL
5 -- 1 2 44918 INSULATION, STACKING PANEL, PRE-CUT
6 -- 4 8 4111A8815 SCREW, HEX HEAD #10-32 X 1/2" (STACKING PANELS)
7 1 1 1 42893 BASE PAD
8a 4 4 -- 42890 445mm LEG EXTENSION (STD), FOR SINGLE AND DOUBLE OVENS
8b -- -- 4 44799 152mm LEG EXTENSION (STD), FOR TRIPLE OVENS
8c 4 4 -- 45329 597mm LEG EXTENSION (CUSTOMER-SPECIFIC), FOR SINGLE AND DOUBLE
8d 4 4 -- 45360 521mm LEG EXTENSION (CUSTOMER-SPECIFIC), FOR SINGLE AND DOUBLE
5
9 4 4 4 22450-0028 LEG, ADJUSTABLE, 152mm
10 4 4 4 22290-0010 CASTER, WITH FLAT PLATE (NO BRAKE)
11 32 32 32 220373 HEX BOLT, 3/8"-16 X 1"
12 32 32 32 21416-0001 FLAT WASHER, 3/8"
13 32 32 32 21422-0001 LOCKWASHER, 3/8"
1411145473OWNER'S OPERATING AND INSTALLATION MANUAL, PS536 ELECTRIC
15 1 1 1 1002040 MIDDLEBY MARSHALL AUTHORIZED SERVICE AGENCY LISTING
PS536 Electric
Europe
MCSG 12/99
6
1 1 42882 TOP PANEL
ITEM QTY. P/N DESCRIPTION
2 2 220352 SCREW, PAN HEAD #10 X 1"
III. TOP PANEL, BASE PAD, LEGS, AND STACKING COMPONENTS
3 2 3A80A8801 SCREW, PAN HEAD #10 X 2"
4 1 42882 TOP PANEL
5 1 44837 STACKING PANEL
6 A/R -- INSULATION, 38mm THICK
7 1 42893 BASE PAD
AND DOUBLE OVENS
8a 4 42890 445mm LEG EXTENSION (STD), FOR SINGLE
OVENS
CIFIC), FOR SINGLE AND DOUBLE OVENS
8c 4 45329 597mm LEG EXTENSION (CUSTOMER-SPE-
8b 4 44799 152mm (STD) LEG EXTENSION, FOR TRIPLE
WITH TYPE 3 (SCH) CONVEYOR
CIFIC), FOR SINGLE AND DOUBLE OVENS
WITH TYPE 4 (OGN) CONVEYOR
8d 4 45360 521mm LEG EXTENSION (CUSTOMER-SPE-
Europe
PS536 Electric
9 4 22450-0028 LEG, ADJUSTABLE, 152mm
10 32 220373 HEX BOLT, 3/8"-16 X 1"
11 32 21416-0001 FLAT WASHER, 3/8"
12 32 21422-0001 LOCKWASHER, 3/8"
7
PS536 Electric
Europe
MCSG 12/99
8
ITEMS 5-10)
IV. PANELS, END PLUGS, AND WINDOW
ITEM QTY. P/N DESCRIPTION
DOW (INC. ITEM 2)
1 1 43255 ASSEMBLY, FRONT PANEL WITHOUT WIN-
(INC. ITEMS 4-10)
2 1 22500-0021 NAMEPLATE, "MIDDLEBY MARSHALL"
3 1 44803 ASSEMBLY, FRONT PANEL WITH WINDOW
4 1 49400-0120 ASSEMBLY, WINDOW AND LATCH (INC.
5 1 37900-0103 WINDOW MOUNTING FRAME
6 1 30286 WINDOW FRAME TOP
7 1 22140-0017 GLASS, PRE-CUT
8 1 30287 WINDOW FRAME
9 1 33300-0273 HINGE TUBE
10 2 34121-0003 THUMBSCREW, PIVOT
11 1 42400-0087 ASSEMBLY, LATCH
12 1 42779 REAR PANEL
13a 1 See pp. 14-23 UPPER CHAIN COVER
14 4 43252 END PLUG
13b 1 See pp. 14-23 LOWER CHAIN COVER
15 2 42771 EYEBROW
16 8 36452 WING NUT, PLASTIC
17 8 45449 BRACKET, END PLUG MOUNTING
Europe
PS536 Electric
9
PS536 Electric
Europe
VERSION
2-SWITCH
VERSION
3-SWITCH
MCSG 12/99
10
12 1 28041-0008 CONTACTOR, 120V 25A
ITEM QTY. P/N DESCRIPTION
13 1 44549 CONTACTOR, 230V 85A
SINK
14 1 44585 ASSEMBLY, SOLID STATE RELAY AND HEAT
15 1 31504 TRANSFORMER, 230V PRI : 120V SEC, 200 VA
16 1 45244 RFI FILTER
17 1 45019 CIRCUIT BREAKER BLOCK, 480V 63A 3-POLE
18 1 36370 TERMINAL BLOCK
19 2 36371 TERMINAL BLOCK END STOP
20 1 27392-0002 COOLING FAN
TION, FOR ELECTRIC OVENS WITH RIGHT-
21 1 27470-0004 GUARD, COOLING FAN
22a 1 45325 CONTROL PANEL, 2-SWITCH CONFIGURA-
SIDE CONTROLS ONLY
TION, FOR ELECTRIC OVENS WITH LEFT-
22b 1 Not available CONTROL PANEL, 2-SWITCH CONFIGURA-
SIDE CONTROLS ONLY
23 1 42847 COVER, ELECTRICAL JUNCTION BOX
V. CONTROL COMPARTMENT
ELECTRIC OVENS)
1 1 44783 DIGITAL TEMPERATURE CONTROLLER (FOR
ITEM QTY. P/N DESCRIPTION
2 A/R 37168 SELECTOR SWITCH WITH KNOB
SION
3a 1 43346 DECAL, CONTROL PANEL, 3-SWITCH VER-
SION
3b 1 45333 DECAL, CONTROL PANEL, 2-SWITCH VER-
DIGITAL DISPLAY (INC. ITEM 5)
4 A/R 37337 KIT, CONVEYOR SPEED CONTROLLER WITH
5 A/R 37503 DIGITAL DISPLAY
6 2 33985 KIT, THERMOCOUPLE
7 1 28021-0047 SAFETY SWITCH
11
8 1 45036 CIRCUIT BREAKER, 240V 3A
9 1 45037 CIRCUIT BREAKER, 240V 15A
10 1 33983 HIGH LIMIT CONTROL MODULE, 240V
Europe
PS536 Electric
11 1 30693 RESET SWITCH FOR HIGH LIMIT, LIGHTED
PS536 Electric
Europe
MCSG 12/99
12
VI. BLOWER ASSEMBLY
ITEM QTY. P/N DESCRIPTION
1 1 28021-0047 SAFETY SWITCH
2 1 27392-0002 COOLING FAN
3 2 42951 INLET RING
4a 1 42752 BLOWER WHEEL, RIGHT
4b 1 42753 BLOWER WHEEL, LEFT
5 2 42999 RETAINER, TEFLON SEAL
6 2 35121-0045 TEFLON SEAL
7 2 22072-0025 BEARING, 5/8" BORE
8 2 42760 BLOWER SHAFT
9 1 44748 COUPLING, BLOWER SHAFT
10 1 44687 MOTOR, BLOWER 1/2HP
11 1 44688 PLATE, MOTOR MOUNTING
13
12 4 A11687 SCREW, HEX CAP HEAD 5/16"-18 X 7/8"
13 4 B301A8847 FLAT WASHER, 5/16"
14 4 A3682 LOCK WASHER, 5/16"
15a 1 43111 PULLEY, BLOWER MOTOR, 24T (STANDARD)
15b 1 45348 PULLEY, BLOWER MOTOR, 21T
16 1 42795 PULLEY, BLOWER SHAFT
17 1 44685 BLOWER BELT
Europe
PS536 Electric
18 2 45281 HEATING ELEMENT, 380V, 8kW
PS536 Electric
Europe
TYPE 2
TYPE 1
MCSG 12/99
14
SINGLE OVEN CAVITY)
UPPER OVEN CAVITIES)
AND PICKUP
12T (STANDARD - FOR USE WITH ITEM
7a)
25T (HIGH SPEED OPTION - FOR USE
WITH ITEM 7b)
LINK
RIGHT-SIDE CONTROLS ONLY
LEFT-SIDE CONTROLS ONLY
RIGHT-SIDE CONTROLS ONLY
VII. STANDARD SINGLE-BELT CONVEYORS, TYPE 1 and TYPE 2 (STD)
Type 1 Type 2
14 A/R A6153 A6153 SCREW, HEX HEAD 1/4"-20 X 1/2"
ITEM QTY. P/N P/N DESCRIPTION
15 1 44690 44690 BELT, CONVEYOR (COMPLETE)
16 1 45642 45642 KIT, MASTER LINKS
17a 2 42899 42899 CRUMB TRAY (SOLID - FOR LOWER OR
17b 2 44807 44807 CRUMB TRAY (PERFORATED - FOR ALL
18 1 43173 43173 CONVEYOR EXIT TRAY
RATED, WITH SET SCREW
19 1 44695 44695 ASSEMBLY, CONVEYOR DRIVE MOTOR
SMOOTH-SURFACED, WITH SET
SCREW
20a 1 34129 34129 SPROCKET, CONVEYOR DRIVE MOTOR,
(STANDARD - FOR USE WITH ITEM 20a)
20b 1 45349 45349 SPROCKET, CONVEYOR DRIVE MOTOR,
(HIGH SPEED OPTION - FOR USE WITH
ITEM 20b)
21 1 44705 44705 ASSEMBLY, DRIVE CHAIN WITH MASTER
22a 1 45309 45309 UPPER CHAIN COVER, OVENS WITH
22b 1 45311 45311 UPPER CHAIN COVER, OVENS WITH
23a 1 45479 45479 LOWER CHAIN COVER, OVENS WITH
SMOOTH-SURFACED, WITH SET
SCREW
available available LEFT-SIDE CONTROLS ONLY
23b 1 Not Not LOWER CHAIN COVER, OVENS WITH
Europe
PS536 Electric
TENSION
Type 1: Produced through 3/01. 60" (1524mm) long, non-folding after initial assembly, center tension adjustment
Type 2: Produced 4/01-current. 60" (1524mm) long, folding, center tension adjustment
ITEM QTY. P/N P/N DESCRIPTION
Type 1 Type 2
1 1 44596 45317 CONVEYOR FRAME, DRIVE
-- 1 -- -- CONVEYOR DRIVE SECTION
2 1 42815 42815 CONVEYOR DRIVE SHAFT
3 2 43275 43275 SPACER
4 2 3100473 3100473 BUSHING, BRONZE, 3/4" OD X 5/8" ID
5 4 324503 324503 SPROCKET, CONVEYOR BELT - SER-
6 2 325001 325001 SPROCKET, CONVEYOR BELT -
7a 1 42819 42819 SPROCKET, CONVEYOR DRIVE, 20T
7b 1 45015 45015 SPROCKET, CONVEYOR DRIVE, 16T
8 1 44596 45316 CONVEYOR FRAME, IDLER
-- 1 -- -- CONVEYOR IDLER SECTION
9 1 42814 42814 CONVEYOR IDLER SHAFT
10 2 43275 43275 SPACER
11 2 3100473 3100473 BUSHING, BRONZE, 3/4" OD X 5/8" ID
12 4 325001 325001 SPROCKET, CONVEYOR BELT -
13 2 43009 45324 ADJUSTMENT BRACKET, CONVEYOR
15
PS536 Electric
Europe
TYPE 2
TYPE 1
MCSG 12/99
16
TENSION
SINGLE OVEN CAVITY)
UPPER OVEN CAVITIES)
AND PICKUP
12T (STANDARD - FOR USE WITH ITEM
7a)
25T (HIGH SPEED OPTION - FOR USE
WITH ITEM 7b)
LINK - FOR FRONT CONVEYOR BELT
LINK - FOR REAR CONVEYOR BELT
RIGHT-SIDE CONTROLS ONLY
LEFT-SIDE CONTROLS ONLY
RIGHT-SIDE CONTROLS ONLY
VIII. STANDARD SPLIT-BELT CONVEYORS, TYPE 1 and TYPE 2 (STD)
Type 1 Type 2
14 2 43009 45324 ADJUSTMENT BRACKET, CONVEYOR
ITEM QTY. P/N P/N DESCRIPTION
15 A/R A6153 A6153 SCREW, HEX HEAD 1/4"-20 X 1/2"
16 2 45352 45352 BELT, CONVEYOR (COMPLETE)
17 1 45642 45642 KIT, MASTER LINKS
18a 2 42899 42899 CRUMB TRAY (SOLID - FOR LOWER OR
18b 2 44807 44807 CRUMB TRAY (PERFORATED - FOR ALL
RATED, WITH SET SCREW
19 1 43173 43173 CONVEYOR EXIT TRAY
SMOOTH-SURFACED, WITH SET
20 2 44695 44695 ASSEMBLY, CONVEYOR DRIVE MOTOR
SCREW
21a 2 34129 34129 SPROCKET, CONVEYOR DRIVE MOTOR,
(STANDARD - FOR USE WITH ITEM 21a)
21b 2 45349 45349 SPROCKET, CONVEYOR DRIVE MOTOR,
(HIGH SPEED OPTION - FOR USE WITH
ITEM 21b)
22a 1 44705 44705 ASSEMBLY, DRIVE CHAIN WITH MASTER
22b 1 44987 44987 ASSEMBLY, DRIVE CHAIN WITH MASTER
23a 1 45309 45309 UPPER CHAIN COVER, OVENS WITH
23b 1 45311 45311 UPPER CHAIN COVER, OVENS WITH
24a 1 45479 45479 LOWER CHAIN COVER, OVENS WITH
SMOOTH-SURFACED, WITH SET
SCREW
available available LEFT-SIDE CONTROLS ONLY
24b 1 Not Not LOWER CHAIN COVER, OVENS WITH
Europe
PS536 Electric
Type 1: Produced through 3/01. 60" (1524mm) long, non-folding after initial assembly, center tension adjustment
Type 2: Produced 4/01-current. 60" (1524mm) long, folding, center tension adjustment
ITEM QTY. P/N P/N DESCRIPTION
Type 1 Type 2
1 1 44596 45317 CONVEYOR FRAME, DRIVE
-- 1 -- -- CONVEYOR DRIVE SECTION
2a 1 44990 44990 CONVEYOR DRIVE SHAFT - FRONT
2b 1 45339 45339 CONVEYOR DRIVE SHAFT - REAR
3 2 43275 43275 SPACER
4 2 3100473 3100473 BUSHING, BRONZE, 3/4" OD X 5/8" ID
5 4 324503 324503 SPROCKET, CONVEYOR BELT - SER-
6 2 325001 325001 SPROCKET, CONVEYOR BELT -
7a 2 42819 42819 SPROCKET, CONVEYOR DRIVE, 20T
7b 2 45015 45015 SPROCKET, CONVEYOR DRIVE, 16T
8 1 45337 45337 SPACER RING, OUTSIDE SPROCKET
9 1 44596 45316 CONVEYOR FRAME, IDLER
-- 1 -- -- CONVEYOR IDLER SECTION
10a 1 45353 45353 CONVEYOR IDLER SHAFT - FRONT
10b 1 43111 43111 CONVEYOR IDLER SHAFT - REAR
11 2 43275 43275 SPACER
12 2 3100473 3100473 BUSHING, BRONZE, 3/4" OD X 5/8" ID
13 6 325001 325001 SPROCKET, CONVEYOR BELT -
17
PS536 Electric
Europe
18
SION
14 2 45324 ADJUSTMENT BRACKET, CONVEYOR TEN-
ITEM QTY. P/N DESCRIPTION
15 A/R A6153 SCREW, HEX HEAD 1/4"-20 X 1/2"
16 1 44690 BELT, CONVEYOR (COMPLETE)
17 1 45642 KIT, MASTER LINKS
18 2 45376 CRUMB TRAY
19 1 43173 CONVEYOR EXIT TRAY
PICKUP
20 1 44695 ASSEMBLY, CONVEYOR DRIVE MOTOR AND
21 1 45349 SPROCKET, CONVEYOR DRIVE MOTOR, 25T
22 1 44705 ASSEMBLY, DRIVE CHAIN WITH MASTER LINK
SIDE CONTROLS ONLY
23a 1 45643 UPPER CHAIN COVER, OVENS WITH RIGHT-
SIDE CONTROLS ONLY
23b 1 Not available UPPER CHAIN COVER, OVENS WITH LEFT-
SIDE CONTROLS ONLY
24a 1 Not available LOWER CHAIN COVER, OVENS WITH RIGHT-
SIDE CONTROLS ONLY
24b 1 Not available LOWER CHAIN COVER, OVENS WITH LEFT-
Europe
PS536 Electric
IX. CUSTOMER-SPECIFIC SINGLE-BELT CONVEYOR, TYPE 3 (SCH)
Type 3: Produced 3/01-current. 60" (1524mm) long, folding, center tension adjustment, external bearings
1 1 45378 CONVEYOR FRAME, DRIVE
-- 1 -- CONVEYOR DRIVE SECTION
ITEM QTY. P/N DESCRIPTION
2 1 45375 CONVEYOR DRIVE SHAFT
3 2 43275 SPACER
RATED, WITH SET SCREW
4 4 324503 SPROCKET, CONVEYOR BELT - SER-
SMOOTH-SURFACED, WITH SET SCREW
5 2 325001 SPROCKET, CONVEYOR BELT -
6 1 45015 SPROCKET, CONVEYOR DRIVE, 16T
7 2 45377 BEARING
8 4 xxxxx SCREW
19
9 1 45316 CONVEYOR FRAME, IDLER
-- 1 -- CONVEYOR IDLER SECTION
10 1 42814 CONVEYOR IDLER SHAFT
11 2 43275 SPACER
12 2 3100473 BUSHING, BRONZE, 3/4" OD X 5/8" ID
SMOOTH-SURFACED, WITH SET SCREW
13 4 325001 SPROCKET, CONVEYOR BELT -
PS536 Electric
Europe
20
17 2 35900-0398 PIVOT PLATE
ITEM QTY. P/N DESCRIPTION
18 4 21176-0002 HEX LOCKNUT, 3/8"-16
19 1 27413-0002 PLUG, 3/4"
20 1 45581 BELT, CONVEYOR (COMPLETE)
21 1 45641 KIT, MASTER LINKS
22 2 45537 CRUMB TRAY
PICKUP
23 1 44695 ASSEMBLY, CONVEYOR DRIVE MOTOR AND
24 1 34129 SPROCKET, CONVEYOR DRIVE MOTOR, 12T
25 1 44705 ASSEMBLY, DRIVE CHAIN WITH MASTER LINK
RIGHT-SIDE CONTROLS ONLY
26a 1 45309 45309 UPPER CHAIN COVER, OVENS WITH
LEFT-SIDE CONTROLS ONLY
26b 1 45311 45311 UPPER CHAIN COVER, OVENS WITH
RIGHT-SIDE CONTROLS ONLY
27a 1 45479 45479 LOWER CHAIN COVER, OVENS WITH
available available LEFT-SIDE CONTROLS ONLY
27b 1 Not Not LOWER CHAIN COVER, OVENS WITH
Europe
PS536 Electric
X. CUSTOMER-SPECIFIC SINGLE-BELT CONVEYOR, TYPE 4 (OGD)
Type 4: Produced 4/01-current. 60" (1524mm) long, folding, endplate thumbscrew tension adjustment
1 1 45558 CONVEYOR FRAME, DRIVE
-- 1 -- CONVEYOR DRIVE SECTION
ITEM QTY. P/N DESCRIPTION
2 1 45541 CONVEYOR DRIVE SHAFT
3 2 22011-0013 COLLAR, SHAFT, WITH SET SCREW
4 2 22034-0003 BUSHING, FLANGED 3/4" OD x 5/8" ID
5 2 35000-1080 SPACER, NYLON 1-1/4" OD x 3/4" ID
6 2 35900-0020 BRACKET, CONVEYOR SHAFT SUPPORT
7 1 35000-1013 ADAPTER, DRIVE SHAFT
SCREW
8 4 22229-0003 SPROCKET, CONVEYOR BELT, WITH SET
21
9 1 42819 SPROCKET, CONVEYOR DRIVE, 20T
-- 1 -- CONVEYOR IDLER SECTION
10 1 45559 CONVEYOR FRAME, IDLER
11 1 45539 CONVEYOR IDLER SHAFT
12 2 22034-0003 BUSHING, FLANGED 3/4" OD x 5/8" ID
13 2 37000-0413 BRACKET, IDLER TENSIONING
14 2 35000-1008 SCREW, IDLER TENSIONING
15 2 35900-0020 BRACKET, CONVEYOR SHAFT SUPPORT
SCREW
16 4 22229-0003 SPROCKET, CONVEYOR BELT, WITH SET
PS536 Electric
Europe
22
17 2 45582 LOCKING PLATE
ITEM QTY. P/N DESCRIPTION
18 4 21176-0002 HEX LOCKNUT, 3/8"-16
19 1 27413-0002 PLUG, 3/4"
20 1 45609 BELT, CONVEYOR (COMPLETE)
21 1 45641 KIT, MASTER LINKS
22 2 45537 CRUMB TRAY
PICKUP
23 1 44695 ASSEMBLY, CONVEYOR DRIVE MOTOR AND
24 1 34129 SPROCKET, CONVEYOR DRIVE MOTOR, 12T
25 1 45640 ASSEMBLY, DRIVE CHAIN WITH MASTER LINK
SIDE CONTROLS ONLY
26a 1 45606 UPPER CHAIN COVER, OVENS WITH RIGHT-
SIDE CONTROLS ONLY
26b 1 Not available UPPER CHAIN COVER, OVENS WITH LEFT-
SIDE CONTROLS ONLY
27a 1 45605 LOWER CHAIN COVER, OVENS WITH RIGHT-
SIDE CONTROLS ONLY
27b 1 Not available LOWER CHAIN COVER, OVENS WITH LEFT-
Europe
PS536 Electric
XI. CUSTOMER-SPECIFIC SINGLE-BELT CONVEYOR, TYPE 5 (MCD)
SCREW
Type 3: Produced 4/01-current. 76" (1930mm) long, non-folding after assembly, endplate thumbscrew tension adjustment
1 1 45568 CONVEYOR FRAME, DRIVE
2 1 45541 CONVEYOR DRIVE SHAFT
3 2 22011-0013 COLLAR, SHAFT, WITH SET SCREW
4 2 22034-0003 BUSHING, FLANGED 3/4" OD x 5/8" ID
5 2 35000-1080 SPACER, NYLON 1-1/4" OD x 3/4" ID
6 2 35900-0020 BRACKET, CONVEYOR SHAFT SUPPORT
7 1 35000-1013 ADAPTER, DRIVE SHAFT
8 4 22229-0003 SPROCKET, CONVEYOR BELT, WITH SET
23
9 1 42819 SPROCKET, CONVEYOR DRIVE, 20T
-- 1 -- CONVEYOR IDLER SECTION
10 1 45569 CONVEYOR FRAME, IDLER
11 1 45539 CONVEYOR IDLER SHAFT
12 2 22034-0003 BUSHING, FLANGED 3/4" OD x 5/8" ID
13 2 37000-0413 BRACKET, IDLER TENSIONING
14 2 35000-1008 SCREW, IDLER TENSIONING
-- 1 -- CONVEYOR DRIVE SECTION
ITEM QTY. P/N DESCRIPTION
SCREW
15 2 35900-0020 BRACKET, CONVEYOR SHAFT SUPPORT
16 4 22229-0003 SPROCKET, CONVEYOR BELT, WITH SET
WARNING
Improper installation, adjustment, alteration, service or maintenance
can cause property damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly before
installing or servicing this equipment.
NOTICE
During the warranty period, ALL parts replacement and servicing should be performed by
your Middleby Marshall Authorized Service Agent. Service that is performed by parties
other than your Middleby Marshall Authorized Service Agent may void your warranty.
NOTICE
Using any parts other than genuine Middleby Marshall factory manufactured parts relieves
the manufacturer of all warranty and liability.
NOTICE
Middleby Marshall reserves the right to change specifications at any time.
PS536 Electric
Europe
Middleby Cooking Systems Group 1400 Toastmaster Drive Elgin, IL 60120 USA (847)741-3300 FAX (847)741-4406
24-Hour Service Hotline: 1-(800)-238-8444
www.middleby.com
24
Loading...