Middleby Marshall Oven PS360-L Parts List

PS300 Series Parts
Gas & Electric (Europe)

PME-13-001

Rev. B  V1  9/00

Europe

PS300 series

PS300 Series Gas and Electric
Ovens

Models:

 PS360-U (Gas and electric)
 PS360-L (Gas and electric)

 PS360WB-U (Gas only)
 PS360WB-L (Gas only)

PARTS MANUAL

for European export ovens

© 2000 Middleby Marshall, Inc.

is a registered trademark of Middleby Marshall, Inc. All rights reserved.

Middleby Cooking Systems Group  1400 Toastmaster Drive  Elgin, IL 60120  [phone]  FAX [phone]

1

PS300 series

Europe

WARNING

FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER

FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR

ANY OTHER APPLIANCE

WARNING

Improper installation, adjustment, alteration, service or maintenance

can cause property damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly before install-

ing or servicing this equipment.

WARNING

DISCONNECT THE OVEN FROM ITS ELECTRICAL POWER SUPPLY

BEFORE SERVICING.

NOTICE

Using any parts other than genuine Middleby Marshall factory manufactured parts relieves

the manufacturer of all warranty and liability.

NOTICE

Middleby Marshall (Manufacturer) reserves the right to change specifications at any time.

2

TABLE OF CONTENTS

Section Page

I. KEY SPARE PARTS KIT ....................................................................................................4

II. INSTALLATION KIT .............................................................................................................5

III. OVEN PANELS, WINDOW AND LEGS .............................................................................. 6

IV. SHROUDS AND VENTS .................................................................................................... 8

V. MACHINERY COMPARTMENT ........................................................................................ 10

VI. CONTROL PANEL AND ELECTRICAL COMONENTS - FOR GAS OVENS ....................12

VII. CONTROL PANEL AND ELECTRICAL COMONENTS - FOR ELECTRIC OVENS .......... 14

VIII. GAS BURNER SYSTEM (GAS OVENS ONLY) ................................................................16

IX. ELECTRIC HEATERS (ELECTRIC OVENS ONLY) .......................................................... 18

X. CONVEYOR ASSEMBLY, SINGLE-BELT OVENS ...........................................................20

XI. CONVEYOR ASSEMBLY, SPLIT-BELT OVENS .............................................................. 22

XII. UPPER OVEN STAND .....................................................................................................24

NOTE: Throughout this Parts Manual, the following abbreviations are used:

A/R = Quantity As Required
N/A = Does Not Apply

Europe

PS300 series

3

PS300 series

Europe

I. KEY SPARE PARTS KIT

ITEM QTY. P/N DESCRIPTION

1 1 36939 KIT, DIGITAL TEMPERATURE CONTROLLER

2 1 27384-0008 CONVEYOR DRIVE MOTOR

3 2 22450-0052 BRUSHES, CONVEYOR DRIVE MOTOR

4 1 37337 KIT, CONVEYOR SPEED CONTROLLER WITH DIGITAL DISPLAY

5 1 27170-0263 CONVEYOR CONTROL PICKUP ASSEMBLY

6 1 33984 THERMOCOUPLE

7 1 97525 COOLING FAN

8a 1 27381-0023 BLOWER MOTOR, 1 PH, 1/3 HP (PS360-U, PS360-L)

8b 1 31432 BLOWER MOTOR, 1 PH, 1 HP (PS360WB-U, PS360WB-L)

ADDITIONAL KIT COMPONENTS FOR GAS OVENS

9 1 35825 KIT, IGNITION MODULE

10 1 27170-0287 BURNER BLOWER/MOTOR ASSEMBLY

11 1 37770 KIT, SOLENOID VALVE

4

II. INSTALLATION KIT

Europe

PS300 series

ITEM LWR OVEN W/O TOP LWR OVEN W/TOP UPR OVEN P/N DESCRIPTION

1 4 4 -- 22450-0028 LEGS, ADJUSTABLE

2a 1 1 1 35000-1103 CONVEYOR END STOP, PS360-U/-L SINGLE BELT

2b 2 2 2 35509 CONVEYOR END STOP, PS360-U/-L SPLIT BELT

2c 1 1 1 36526 CONVEYOR END STOP, PS360WB-U/-L (SINGLE OR

3 -- -- 2 35122-0049 ATTACHMENT PLATE, UPPER OVEN

4 2 2 2 21256-0008 SCREW, #10-32 X 3/8"

5 1 1 1 27276-0001 CABLE CLAMP

6 2 2 14 21292-0001 SCREW, #2PT 10-16 X 3/4" HWH

7a 1 1 1 30708 OWNER'S OPERATING AND INSTALLATION MANUAL,

7b 1 1 1 31882 OWNER'S OPERATING AND INSTALLATION MANUAL,

8 1 1 1 1002040 AUTHORIZED SERVICE AGENCY LISTING

QTY.

SPLIT BELT)

GAS PS360-U/-L & PS360WB-U/-L (ENGLISH/GERMAN)

ELECTRIC PS360-U/-L (ENGLISH/GERMAN)

ADDITIONAL KIT COMPONENTS FOR GAS OVENS

4 1 1 1 21256-0008 SCREW, #10-32 X 3/8"

6 2 2 2 21292-0001 SCREW, #2PT 10-16 X 3/4" HWH

9 1 1 1 22361-0001 GAS HOSE, FLEXIBLE

10a -- 1 - - 30773 FLUE VENT, 14" (356mm)

10b -- -- 1 30759 FLUE VENT, 29-1/2" (749mm)

10c 1 -- -- 30758 FLUE VENT, 50" (1270mm)

ADDITIONAL KIT COMPONENTS FOR TANDEM OVENS (NOT SHOWN)

ITEM TANDEM OVEN DOUBLE (2-STACK) TANDEM OVEN P/N DESCRIPTION

-- 1 2 35000-1454

-- 2 4

-- 2 4 35000-1457 REAR GASKET SPACER

-- 1 2 37200-0013

-- 1 2

35000-1456 FRONT GASKET SPACER

32483

5

MACHINERY COMPARTMENT TRIM STRIP

BAKING CHAMBER GASKET & FRAME, PS360-U/-L

BAKING CHAMBER GASKET & FRAME, PS360WB-U/-L

Europe

PS300 series

6

III. OVEN PANELS, WINDOWS, AND LEGS

ITEM QTY. PS360-U/-L PS360WB-U/-L DESCRIPTION

P/N

1 1 42400-0156 42400-0156 GLASS FRAME/HANDLE ASSEMBLY

2 1 37115-0136 37115-0136 GLASS FRAME/HANDLE WELDMENT

3 1 22140-0012 22140-0012 GLASS

4 1 35000-1025 35000-1025 TOP FRAME

5 A/R 17130-0006 17130-0006 SILICONE - ADH. SEAL

6 1 33300-0114 33300-0114 TUBE SS. 18 GA. 37" X 3/8"

7 2 34121-0003 34121-0003 SCREW - THUMB PIVOT

8 1 37000-0371 37000-0371 WINDOW/MTG FRAME WELDMENT

9 14 31451 31451 SCREW 6/32 X 5/8"

10 1 42400-0087 42400-0087 LATCH ASSEMBLY

12a 1 37000-0454 37000-0740 END PLUG - RIGHT, UPPER OVEN

12b 1 37000-0455 37000-0739 END PLUG - RIGHT, LOWER OVEN

13 4 31409 31409 WING SCREW

14 3 30631 30631 CAUTION LABEL

7

15a 1 37000-0456 37000-0738 END PLUG TOP HALF - LEFT, UPPER OVEN

15b 1 37000-0458 37000-0736 END PLUG TOP HALF - LEFT, LOWER OVEN

16a 1 37000-0457 37000-0737 END PLUG BOTTOM HALF - LEFT, UPPER

16b 1 37000-0459 37000-0735 END PLUG BOTTOM HALF - LEFT, LOWER

or 34309

or 34433

or 34310

or 34431

or 34314 OVEN

or 34430 OVEN

ITEM QTY. PS360-U/-L PS360WB-U/-L DESCRIPTION

P/N

17 1 35000-0946 35000-1834 END PLUG BRACKET - LH FRONT

18 1 35000-0945 35000-1833 END PLUG BRACKET - LH REAR

19a 1 35000-1493 35000-1898 TOP PANEL (LOWER SINGLE OVEN - FITS

ON TOP OF BAKING CHAMBER)

19b 1 35000-0063 35000-1894 TOP PANEL (UPPER OVEN OR DOUBLE

OVEN - MOUNTS ON TOP OF MACHINERY
COMPARTMENT)

20 1 37000-0451 37000-0451 REAR PANEL

21 A/R 22420-0005 22420-0005 WINDOW GASKET

23 1 35200-0010 35200-0010 SCREEN GUARD FOR UPPER BURNER

CHAMBER (OPTIONAL)

24a 1 35000-0955 35000-0955 FRONT PANEL, OUTER, LOWER OVEN

24b 1 35000-0953 35000-0953 FRONT PANEL, OUTER, UPPER OVEN

26 A/R 22131-0004 22131-0004 INSULATION 1" INSIDE OF ALL TOP, FRONT

AND REAR PANELS (NOT SHOWN)

27 1 35200-0034 35200-0034 EYEBROW

28 2 21141-0001 21141-0001 WING NUT, 1/4"-20

29 1 37000-0571 37000-0571 EYEBROW MOUNTING BRACKET

30 2 21292-0001 21292-0001 SCREW, HEX WASHER HEAD #2 PT, #10-

16 x 3/4"

PS300 series

Europe

Europe

PS300 series

8

IV. SHROUDS AND VENTS

QTY. QTY.

ITEM OVEN OVEN P/N DESCRIPTION

1a 1 2 31495 FLUE VENT SHROUD, 2" (51mm)

1b 1 2 32137 FLUE VENT SHROUD, 5"

9

SINGLE DOUBLE

(127mm)

2 1 2 30758 VENT MOUNTING BOX

3 1 2 27280-0005 NUT

4 2 4 21256-0008 SCREW, HEX HD #10-32 X 3/8"

5 1 -- 30773 VENT, 14" (356mm) - FOR

LOWER OVENS

6 -- 1 30760 VENT, 50" (1270mm) - FOR

LOWER OVENS

7 1 1 30759 VENT, 29-1/2" (749mm) - FOR

UPPER OVENS

QTY. QTY.

SINGLE DOUBLE

ITEM OVEN OVEN P/N DESCRIPTION

8 2 4 21292-0001 SCREW, HEX HD #10-16 X 3/4"

9 1 2 35000-1017 UTILITY SHROUD HANGER

10 4 8 35000-1622 HANGER, REAR SHROUD

11a 1 2 30364 UTILITY SHROUD ASSEMBLY

11b 1 2 32049 UTILITY SHROUD ASSEMBLY

(SPLIT BELT OVENS)

12a 1 2 30363 UTILITY SHROUD, BOTTOM

(SINGLE-BELT OVENS)

12b 1 2 32048 UTILITY SHROUD, BOTTOM

(SPLIT-BELT OVENS)

13 1 2 2000346 SCREW, SLT RND HD 1/4"-20 X

1/2"

14 1 2 21416-0005 FLAT WASHER, 1/4"

PS300 series

Europe

10

Europe

PS300 series

V. MACHINERY COMPARTMENT

ITEM QTY. P/N DESCRIPTION

1 1 30356 MACHINERY COMPARTMENT DOOR

2 1 30361 CONTROL COMPARTMENT DOOR

3 4 2000294 FLAT HEAD SCREW, #10-24 x 1-1/4"

4 18 21475-0001 FINISHING WASHER, #10

5 4 30338 RETAINER, #10-24

6 6 21292-0001 HEX SCREW, #10-16 X 3/4"

8 4 22450-0028 ADJUSTABLE LEG

9 14 21272-0013 FLAT HEAD SCREW, #10-24 X 1/2"

10a 1 35000-0958 END PANEL - RIGHT SIDE FOR LOWER OVEN, LEFT SIDE

10b 1 35000-1866 END PANEL - RIGHT SIDE FOR LOWER OVEN, LEFT SIDE

11a 1 35000-0959 END PANEL - LEFT SIDE FOR LOWER OVEN, RIGHT SIDE

11b 1 35000-1867 END PANEL - LEFT SIDE FOR LOWER OVEN, RIGHT SIDE

11

12 1 28021-0047 DOOR SAFETY SWITCH

13 1 35000-0957 REAR PANEL, MACHINERY COMPARTMENT

14a 2 27381-0023 BLOWER MOTOR, 1 PH, 1/3 HP (PS360-U/-L)

14b 2 31432 BLOWER MOTOR, 1 PH, 1 HP (PS360WB-U, PS360WB-L)

-- 1 oz. 17110-0018 TUBE OF ANTI-SEIZE LUBRICANT (NOT SHOWN)

15 2 27221-0013 BUSH, SNAP NYLON

FOR UPPER OVEN - PS360-U/-L

FOR UPPER OVEN - PS360WB-U/-L

FOR UPPER OVEN - PS360-U/-L

FOR UPPER OVEN - PS360WB-U/-L

ITEM QTY. P/N DESCRIPTION

16 8 21216-0013 HEX CAP SCREW, 5/16"-18 X 1"

17 16 21412-0005 FLAT WASHER, 5/16"

18 8 21126-0004 HEX NUT, 5/16"-18

19 2 27396-0004 HEAT SLINGER WITH SET SCREW

20 1 21276-0035 SET SCREW, 1/4"-20 X 3/8"

21a 2 22450-0062 INLET CONE, 9-3/16" - FOR 50 Hz PS360-U/-L

21b 2 31602 INLET CONE, 9-7/8" - FOR 50 Hz PS360WB-U/-L

22a 1 22523-0002 CLOCKWISE BLOWER WHEEL, 9-3/16" D - LEFT SIDE OF

LOWER OVEN, RIGHT SIDE OF UPPER OVEN - FOR 50 Hz
PS360-U/-L

22b 1 22523-0003 COUNTERCLOCKWISE BLOWER WHEEL, 9-3/16" D - RIGHT

SIDE OF LOWER OVEN, LEFT SIDE OF UPPER OVEN - FOR
50 Hz PS360-U/-L

22c 1 22523-0006 CLOCKWISE BLOWER WHEEL, 9-7/8" D - LEFT SIDE OF

LOWER OVEN, RIGHT SIDE OF UPPER OVEN - FOR 50 Hz
PS360WB-U/-L

22d 1 22523-0007 COUNTERCLOCKWISE BLOWER WHEEL, 9-7/8" D - RIGHT

SIDE OF LOWER OVEN, LEFT SIDE OF UPPER OVEN - FOR
50 Hz PS360WB-U/-L

23 2 37115-0151 INNER SHAFT SEAL

24 2 35000-1781 TEFLON SEAL

25 2 35131-0038 HEAT SINK PLATE

26 A/R 21292-0001 HEX SCREW, #10-16 X 3/4"

27 A/R 22420-0002 GASKET (PER 12"/305mm LENGTH)

ADDITIONAL COMPONENTS FOR GAS OVENS

ITEM QTY. P/N DESCRIPTION

28 1 35000-1036 BURNER OUTER MOUNTING PLATE

29 1 37000-0236 BURNER INNER MOUNTING PLATE

30 1 35112-0075 BURNER TUBE

31 1 37000-0659 ADJUSTABLE FLAME TUBE

32 1 35333-0003 BURNER SHIELD

33 1 37000-0658 ADJUSTABLE FLAME TUBE INDICATOR AND SHAFT

ITEM QTY. P/N DESCRIPTION

34 A/R 21292-0001 HEX SCREW, #10-16 X 3/4"

35 1 28021-0016 LIGHTED RESET SWITCH

-- 1 27073-0007 BULB, NEON 220V (INC. W/ITEM 35)

36 1 27170-0269 CAPACITOR, START (BLACK) (PS360WB-U/-L ONLY)

37 1 27170-0270 CAPACITOR, RUN (SILVER) (PS360WB-U/-L ONLY)

PS300 series

Europe

12

Europe

PS300 series

VI. CONTROL PANEL AND ELECTRICAL COMPONENTS - FOR GAS OVENS

ITEM QTY. P/N DESCRIPTION

1 10 27311-0003 CABLE TIE, PLASTIC, 20cm L

2 1 27011-0013 TERMINAL BLOCK, 6-POLE (FOR CON-

VEYOR MOTOR)

3 1 42400-0256 GROUND WIRE ASSEMBLY

4 1 33813 RFI FILTER

5a 1 33814 JUNCTION BOX W/COVER - FOR OV-

ENS WITH RFI FILTER (INC. ITEM 6a)

6a

5b 1 27292-0009 JUNCTION BOX - FOR OVENS WITH-

6b 1 27306-0006 JUNCTION BOX COVER FOR ITEM 5b -

13

7 2 97525 COOLING FAN

8 2 27470-0004 GRILL, COOLING FAN

9 1 28021-0047 DOOR SAFETY SWITCH

10 1 35825 KIT, IGNITION MODULE

11 1 32001 CONNECTOR, 12-PIN

12 1 31048 IGNITION CABLE, 85cm

13 2 35625 KIT, AIR SWITCH

14 A/R 38290 TUBING, SILICONE, 6.4mm DIA.

15 1 28140-0006 HIGH LIMIT THERMOSTAT

16 1 30354 CAPILLARY TUBE SUPPORT

INCLUDED JUNCTION BOX COVER FOR ITEM

WITH ITEM 16a 5a

OUT RFI FILTER

NOT INCLUDED WITH ITEM 5b

BRACKET

ITEM QTY. P/N DESCRIPTION

17 6 31047 TERMINAL BLOCK, 6-POLE

18 3 27011-0017 TERMINAL BLOCK CONTACT SECTION

19 1 30361 CONTROL DOOR WELDMENT

20 1 36939 KIT, DIGITAL TEMPERATURE CON-

TROLLER

21 1 33984 KIT, THERMOCOUPLE, TYPE J

22 3 28021-0062 SWITCH, 2-POSITION, BLUE

23 3 27060-0012 CONTACT BLOCK WITH BASE

24 A/R 37337 KIT, CONVEYOR SPEED CONTROL-

LER WITH DIGITAL DISPLAY

25 -- 37503 DIGITAL DISPLAY ONLY

26 1 27011-0011 TERMINAL BLOCK, 8-POLE

27 1 30873 TRANSFORMER, 240Vp : 120Vs

28 1 28041-0011 CONTACTOR, 3-POLE

29 1 27021-0012 FUSE BLOCK, 2-POLE

30 2 30351 FUSE, 6A 250V

31 1 27021-0011 FUSE BLOCK, 5-POLE

32 4 28154-0003 FUSE, 9A 250V

33 1 31158 FUSE, 2A 250V

34 1 28021-0016 LIGHTED RESET SWITCH

-- 1 27073-0007 BULB, NEON 220V (INC. W/ITEM

34)

PS300 series

Europe

14

Europe

PS300 series

VII. CONTROL PANEL AND ELECTRICAL COMPONENTS - FOR ELECTRIC OVENS

ITEM QTY. P/N DESCRIPTION

1 10 27311-0003 CABLE TIE, PLASTIC, 20cm L

2 1 27011-0013 TERMINAL BLOCK, 6-POLE (FOR CON-

VEYOR MOTOR)

3 1 42400-0256 GROUND WIRE ASSEMBLY

4 1 33813 RFI FILTER

5a 1 33814 JUNCTION BOX W/COVER - FOR OV-

ENS WITH RFI FILTER (INC. ITEM 6a)

6a

5b 1 27292-0009 JUNCTION BOX - FOR OVENS WITH-

6b 1 27306-0006 JUNCTION BOX COVER FOR ITEM 5b -

15

7 2 97525 COOLING FAN

8 2 27470-0004 GRILL, COOLING FAN

9 1 28021-0047 DOOR SAFETY SWITCH

10 1 31047 TERMINAL BLOCK

11 1 30361 CONTROL DOOR WELDMENT

12 1 36939 KIT, DIGITAL TEMPERATURE CON-

INCLUDED JUNCTION BOX COVER FOR ITEM

WITH ITEM 16a 5a

OUT RFI FILTER

NOT INCLUDED WITH ITEM 5b

TROLLER

ITEM QTY. P/N DESCRIPTION

13 1 33984 KIT, THERMOCOUPLE, TYPE J

14 3 28021-0062 SWITCH, 2-POSITION, BLUE

15 3 27060-0012 CONTACT BLOCK WITH BASE

16 A/R 37337 KIT, CONVEYOR SPEED CONTROL-

LER WITH DIGITAL DISPLAY

17 -- 37503 DIGITAL DISPLAY ONLY

18 3 21021-0017 FUSE BLOCK

19 19 31529 FUSE, 20A

20 1 27480-0001 TERMINAL BLOCK

21 1 27273-0002 GROUND LUG

22 2 31704 HEAT SINK

23 9 31463 SOLID STATE RELAY

24 2 28041-0011 CONTACTOR, 4-POLE

25 1 35625 KIT, AIR SWITCH

26 1 27021-0012 FUSE BLOCK, 2-POLE

27 1 27021-0011 FUSE BLOCK, 8-POLE

28 3 30351 FUSE, 6A 250V

29 1 31158 FUSE, 2A 250V

30 6 28041-0011 FUSE, 4A 250V

PS300 series

Europe

16

Europe

PS300 series

VIII. GAS BURNER SYSTEM (GAS OVENS ONLY)

ITEMQTY. P/N DESCRIPTION

1 1 28092-0020 MULTIFUNCTION GAS VALVE

2 1 37770 KIT, SOLENOID VALVE

3 1 27361-0018 BURNER ASSEMBLY

4 1 27170-0287 BURNER BLOWER/MOTOR ASSEMBLY

5 1 42810-0087 KIT, AIR SHUTTER ASSEMBLY

6 1 42400-0640 ASSY, PITOT TUBE

7 1 36562 KIT, BURNER MOUNTING RING

8 1 27170-0223 VENTURI ASSEMBLY

9 1 42810-0117 KIT, PILOT IGNITOR ASSEMBLY

10 1 27170-0264 PILOT IGNITOR BRACKET

11 1 27170-0204 PILOT SHIELD

12 1 38284 FITTING, PILOT TUBING

17

GAS ORIFICES FOR PS360-U, PS360-L

ITEM 19 ITEM 20 ITEM 21

GAS TYPE MAIN ORIFICE PILOT ORIFICE BYPASS ORIFICE

Natural G20 22176-0004 5.5mm 22174-0011 0.64mm 22174-0020 1.65mm

Natural G25 22176-0004 5.5mm 22174-0011 0.64mm 22174-0020 1.65mm

Natural G20,G25 31979 4.5mm 22174-0011 0.64mm 22174-0006 1.50mm

Liquid G30 22176-0023 2.7mm 22174-0010 0.38mm 22174-0023 0.85mm

Liquid G30,G31 30875 3.1mm 22174-0010 0.38mm 22174-0009 0.95mm

ITEMQTY. P/N DESCRIPTION

pagepage

13 A/R 15125-0002 TUBING, ALUMINUM, 1/4 DIA., PER 1 FT./

305mm LENGTH

14 1 23052-0007 FITTING, PILOT BULKHEAD

15 1 38279 MAIN ORIFICE HOLDER/GAS INLET CON-

NECTOR

16 1 23051-0004 PIPE UNION, 3/4"

17 1 30185 KIT, PILOT PRESSURE TAP (PILOT TEE)

18 A/R 15125-0002 TUBING, ALUMINUM, 1/4 DIA., PER 1 FT./

305mm LENGTH

19 1 See chart ORIFICE, MAIN

20 1 See chart ORIFICE, PILOT

21 1 See chart ORIFICE, BYPASS

GAS ORIFICES FOR PS360WB-U, PS360WB-L

ITEM 19 ITEM 20 ITEM 21

GAS TYPE MAIN ORIFICE PILOT ORIFICE BYPASS ORIFICE

Natural G20 22176-0014 6.3mm 22174-0011 0.64mm 30874 2.30mm

Natural G25 22176-0014 6.3mm 22174-0011 0.64mm 30874 2.30mm

Natural G20,G25 22176-0004 5.4mm 22174-0011 0.64mm 31983 2.00mm

Liquid G30 30875 3.1mm 22174-0010 0.38mm 31313 1.40mm

Liquid G30,G31 31984 3.5mm 22174-0010 0.38mm 31313 1.40mm

PS300 series

Europe

18

Europe

PS300 series

IX. ELECTRIC HEATERS (ELECTRIC OVENS ONLY)

pagepage

ITEMQTY. P/N DESCRIPTION

-- 1 42400-0312 HEATING ELEMENT ASSEMBLY, 380V
(INC. ITEMS 1-7)

1 1 35000-1316 HEATING ELEMENT COVER

2 6 A6153 SCREW, HEX HD 1/4"-20 X 1/2

3 6 21426-0002 LOCKWASHER, 1/4"

4 1 37000-0562 MOUNTING PLATE, HEATER

5 18 27374-0003 HEATING ELEMENT, 380V

6 4 35000-1340 BRACKET HOLDER, HEATING ELE-

MENT

7 8 A3896 SCREW, HEX HD 5/16"-18 x 1"

8 2 35000-1337 HEATING ELEMENT SPACER (4)

9 2 35000-1338 HEATING ELEMENT SPACER (5)

19

10 4 35000-1339 HEATING ELEMENT SPACER BAR

11 8 21226-0007 SCREW, RND HD #10-24 x 1/2

12 8 A3323 HEX NUT, 10-24 SS

ITEMQTY. P/N DESCRIPTION

13 8 21426-0005 LOCKWASHER, #10

14 1 35000-1199 INNER PLATE

15 1 35000-1200 OUTER PLATE

16 36 21292-0001 SCREW, HEX HD #10-16 x 3/4

17 1 37116-0022 BAFFLE

18 A/R 27252-0005 RING TERMINAL, #12 AWG, 1200°F/649°C

19 A/R 21426-0005 LOCKWASHER, #10

20 A/R 21126-0007 HEX NUT, #10-32

21 A/R 27152-0047 WIRE, STRAND #12 AWG (842°F/450°C)

22 A/R 22134-0002 INSULATION - CERAWOOL, 2" THICK x 24

WIDE

23 8 A3896 SCREW, HEX CAP HD 5/16"-18 X 1"

24 4 21126-0004 HEX NUT, 5/16"-18

25 4 21426-0003 LOCKWASHER, 5/16"

PS300 series

Europe

20

Europe

PS300 series

X. CONVEYOR ASSEMBLY, SINGLE-BELT OVENS

P/N

ITEM QTY. PS360-U/-L PS360WB-U/-L DESCRIPTION

1 1 37000-0469 37200-0023 COVER, CONV. EXTENSION, IDLER END

2a 1 35000-1103 35000-1899 CONVEYOR END STOP, STD

2b 1 37000-0524 37000-0524 CONVEYOR END STOP, WIDE - "Q" MOD-

3 2 35000-0948 35000-1861 CRUMB PAN - ALL SINGLE OVENS, OR

4 1 35000-1077 35000-1862 CRUMB PAN - UPPER OVEN (IDLER END)

5 1 37000-0470 42400-0593 CRUMB PAN WITH HEAT DIVERTER -

6 1 37000-0470 37000-0025 COVER, CONVEYOR EXTENSION, DRIVE

7 1 42400-0284 42400-0594 CONVEYOR ASSEMBLY, COMPLETE

8 1 42400-0283 42400-0595 CONVEYOR ASSEMBLY - DRIVE

9 1 37000-0408 37200-0026 CONVEYOR FRAME - DRIVE

21

10 1 35000-1012 35000-1864 CONVEYOR DRIVE SHAFT

11 2 22011-0013 22011-0013 SHAFT COLLAR W/SCREW

12 2 22034-0003 22034-0003 BUSHING, 5/8" ID X 3/4" OD X 1/2" L

13 1 35000-1080 35000-1080 NYLON SPACER

14 6 22229-0003 22229-0003 CONV. SPROCKET WITH SET SCREW

-- A/R 21276-0039 21276-0039 SOCKET SET SCREW, 1/4"-28 X 3/8"

15 1 42400-0309 42400-0309 DRIVE SPROCKET ASSY

16 1 35000-1013 35000-1013 DRIVE SHAFT ADAPTER
17 1 22152-0017 22152-0017 SPROCKET, 9T

18 1 21276-0038 21276-0038 SKT. SET SCREW, #10-24 X 5/16"

19 1 42400-0282 42400-0596 CONVEYOR ASSEMBLY - IDLER

20 1 37000-0409 37200-0027 CONVEYOR FRAME - IDLER

21 1 35000-1011 35000-1865 CONVEYOR IDLER SHAFT

22 2 22034-0003 22034-0003 BUSHING, 5/8" ID X 3/4" OD X 1/2" L

23 2 37000-0413 37000-0413 TENSION ADJUSTMENT BRACKET

24 2 35000-1008 35000-1008 TENSION ADJUSTMENT BOLT

25 6 22229-0003 22229-0003 CONV. SPROCKET W/SET SCREW

-- A/R 21276-0039 21276-0039 SKT. SET SCREW, 1/4"-28 X 3/8"

ELS ONLY

LOWER OVEN OF 2-STACK

OF 2-STACK

UPPER OVEN (DRIVE END OF 2-STACK)

END

(WITH BELT)

P/N

ITEM QTY. PS360-U/-L PS360WB-U/-L DESCRIPTION

26a 1 37000-0410 37200-0028 CONV. FRAME - CENTER, STANDARD

26b 2 37000-0635 33293 CONV. FRAME - CENTER, TANDEM

OVENS

27 A/R 35900-0169 35900-0169 CONVEYOR PIVOT PLATE

28 A/R 21176-0001 21176-0001 HEX LOCK NUT, 1/4"-20

`29a 1 22450-0001 22450-0289 CONV. BELT, COMPLETE 174"L

29b - - 33900-0032 33900-0085 BELT SECTION, 12"L

30 1 42400-0089 42400-0598 MASTER LINKS KIT

31 1 27384-0008 27384-0008 GEAR MOTOR, 1400:1

-- 2 22450-0052 22450-0052 BRUSHES, GEAR MOTOR

32 1 27170-0263 27170-0263 PICKUP ASSEMBLY

33a 1 22152-0018 22152-0018 SPROCKET, STANDARD - 15T WITH SET

SCREW

33b 1 22152-0027 -- SPROCKET, HIGH SPEED OPTION - 45T

WITH SET SCREW

33c 1 22152-0022 22152-0022 SPROCKET, TANDEM OVEN - 30T WITH

SET SCREW

34a 1 42400-0163 42400-0163 ROLLER CHAIN ASSY - STANDARD, 52

LINKS, 25-1/2", WITH MASTER LINK

34b 1 42400-0164 42400-0164 ROLLER CHAIN ASSY - TANDEM OV-

ENS, 62 LINKS, 30-1/2", WITH MASTER
LINK

35 1 35000-1021 35000-1021 MOTOR MOUNTING BRACKET

36 4 21411-0003 21411-0003 FLAT WASHER, 1/4"

37 4 21426-0002 21426-0002 LOCKWASHER, 1/4"

38 4 21126-0009 21126-0009 HEX NUT, 1/4"-20

39 1 37000-0427 37000-0427 MOTOR MOUNTING WELDMENT

40 4 21212-0002 21212-0002 SCREW, CAP HEX HD 1/4"-20 X 3/4"

PS300 series

Europe

22

Europe

PS300 series

XI. CONVEYOR ASSEMBLY, SPLIT-BELT OVENS

PS360-U/-L PS360WB-U/-L

P/N

ITEM QTY. BELTS BELTS BELTS DESCRIPTION

1 1 37000-0469 37200-0023 37200-0023 COVER, CONVEYOR EXTENSION, IDLER END

2a 1 35000-1103 35000-1899 35000-1899 CONVEYOR END STOP, STD

2b 1 37000-0524 37000-0524 37000-0524 CONVEYOR END STOP, WIDE - "Q" MODELS

3 2 35000-0948 35000-1861 35000-1861 CRUMB PAN - ALL SINGLE OVENS, OR LOWER

4 1 35000-1077 35000-1862 35000-1862 CRUMB PAN - UPPER OVEN (IDLER END) OF

5 1 37000-0470 42400-0593 42400-0593 CRUMB PAN WITH HEAT DIVERTER - UPPER

6 1 37000-0470 37000-0025 37000-0025 COVER, CONVEYOR EXTENSION, DRIVE END

7 1 42400-0360 -- -- CONVEYOR ASSEMBLY, COMPLETE (WITH

8 1 42400-0358 -- -- CONVEYOR ASSEMBLY - DRIVE

9 1 37000-0408 37200-0026 37200-0026 CONVEYOR FRAME - DRIVE

10 1 35000-1536 35200-0066 36033 CONVEYOR DRIVE SHAFT - REAR

11 1 42400-0355 42400-0632 36034 CONVEYOR DRIVE SHAFT - FRONT

12 1 21415-0001 21415-0001 21415-0001 FLAT WASHER, BRONZE

23

13 1 22011-0014 22011-0014 22011-0014 SPLIT LOCKING COLLAR

14 2 22034-0003 22034-0003 22034-0003 BUSHING, 5/8" ID X 3/4" OD X 1/2" LONG

15 2 35000-1080 35000-1080 35000-1080 NYLON SPACER

16a 8 22229-0003 22229-0003 -- CONVEYOR SPROCKET WITH SCREW

16b 10 -- -- 22229-0003 CONVEYOR SPROCKET WITH SCREW

-- A /R 21276-0039 21276-0039 21276-0039 SOCKET SET SCREW, 1/4"-28 X 3/8"

17 1 35000-1537 35000-1537 35000-1537 BUSHING SPROCKET, FRONT

18 2 22152-0017 22152-0017 22152-0017 SPROCKET, 9T

19 1 21276-0038 21276-0038 21276-0038 SOCKET SET SCREW, #10-24 X 5/16"

20 1 21276-0049 21276-0049 21276-0049 SOCKET SET SCREW, #10-24 X 1/2"

21 1 A3323 A3323 A3323 HEX NUT, #10-24

22 1 42400-0359 -- -- CONVEYOR ASSEMBLY - IDLER, WITHOUT

23 1 37000-0409 37200-0027 -- CONVEYOR FRAME - IDLER

24 1 35000-1071 35200-0065 -- CONVEYOR IDLER SHAFT - REAR

25 1 42400-0354 42400-0631 -- CONVEYOR IDLER SHAFT - FRONT

26 1 21415-0001 21415-0001 -- FLAT WASHER, BRONZE

27 2 22034-0003 22034-0003 -- BUSHING, 5/8" ID X 3/4" OD X 1/2" LONG

28 2 37000-0413 37000-0413 -- TENSION ADJUSTMENT BRACKET

29 2 35000-1008 35000-1008 -- TENSION ADJUSTMENT BOLT

30 8 22229-0003 22229-0003 -- CONVEYOR SPROCKET WITH SCREW

-- A /R 21276-0039 21276-0039 -- SOCKET SET SCREW, 1/4"-28 X 3/8"

15"+15" 19"+19" 13"+26"

ONLY

OVEN OF 2-STACK

2-STACK

OVEN (DRIVE END OF 2-STACK)

BELT)

CENTER SUPPORT BEARING BLOCK

PS360-U/-L PS360WB-U/-L

P/N

15"+15" 19"+19" 13"+26"

ITEM QTY. BELTS BELTS BELTS DESCRIPTION

31 1 -- -- -- CONVEYOR ASSEMBLY - IDLER, WITH

CENTER SUPPORT BEARING BLOCK

32 1 -- 36032 36032 CONVEYOR FRAME - IDLER

33 1 -- 36961 36037 CONVEYOR IDLER SHAFT - REAR

34 1 -- 36961 36040 CONVEYOR IDLER SHAFT - FRONT

35 1 -- 33757 33757 IDLER SUPPORT BEARING BLOCK

27 4 -- 22034-0003 22034-0003 BUSHING, 5/8" ID X 3/4" OD X 1/2" LONG

28 2 -- 37000-0413 37000-0413 TENSION ADJUSTMENT BRACKET

29 2 -- 35000-1008 35000-1008 TENSION ADJUSTMENT BOLT

30a 8 -- 22229-0003 -- CONVEYOR SPROCKET WITH SCREW

30b 10 -- -- 22229-0003 CONVEYOR SPROCKET WITH SCREW

-- A /R -- 21276-0039 21276-0039 SOCKET SET SCREW, 1/4"-28 X 3/8"

31 1 37000-0410 37200-0028 37200-0028 CONVEYOR FRAME - CENTER

32 4 35900-0169 35900-0169 35900-0169 CONVEYOR PIVOT PLATE

33 8 21176-0001 21176-0001 21176-0001 HEX LOCK NUT, 1/4"-20

34a 2 22450-0094 22450-0292 -- CONV. BELT, COMPLETE 174"L

34b 1 -- -- 36057 CONV. BELT, COMPLETE 13"W X 174"L

34c 1 -- -- 36058 CONV. BELT, COMPLETE 26"W X 174"L

34d -- 33900-0037 39388 -- BELT SECTION, 12"L

34e -- -- -- 36072 BELT SECTION, 13"W X 12"L

34f -- -- -- 36073 BELT SECTION, 26"W X 12"L

35 1 NOT AVAIL. NOT AVAIL. NOT AVAIL. MASTER LINKS KIT

36 2 27384-0008 27384-0008 27384-0008 GEAR MOTOR, 1400:1

-- 4 22450-0052 22450-0052 22450-0052 BRUSHES, GEAR MOTOR

37 2 27170-0263 27170-0263 27170-0263 PICKUP ASSEMBLY

38 2 22152-0018 22152-0018 22152-0018 SPROCKET - 15T WITH SET SCREW

39 1 42400-0163 42400-0163 42400-0163 ROLLER CHAIN ASSY - 25-1/2", WITH MASTER

LINK

40 1 42400-0160 42400-0160 42400-0160 ROLLER CHAIN ASSY - 14-1/2", WITH MASTER

LINK

41 1 37000-0632 37000-0632 37000-0632 MOTOR MOUNTING BRACKET

42 8 21411-0003 21411-0003 21411-0003 FLAT WASHER, 1/4"

43 8 21426-0002 21426-0002 21426-0002 LOCKWASHER, 1/4"

44 8 21126-0009 21126-0009 21126-0009 HEX NUT, 1/4"-20

45 1 37000-0427 37000-0427 37000-0427 MOTOR MOUNTING WELDMENT

46 4 21212-0002 21212-0002 21212-0002 SCREW, CAP HEX HD 1/4"-20 X 3/4"

PS300 series

Europe

24

Europe

PS300 series

25

XII. UPPER OVEN STAND

ITEM QTY. PS360-U PS360WB-U DESCRIPTION

-- 1 49009-0005 32433 UPPER OVEN STAND ASSEMBLY

1 1 37115-0208 31890 BOTTOM FRAME WELDMENT

2 4 21211-0034 21211-0034 HEX HEAD BOLT, 1/2"-13 X 3"

3 8 21421-0002 21421-0002 LOCKWASHER

4 1 37115-0207 31899 TOP FRAME WELDMENT

5 4 21251-0019 21251-0019 HEX SOCKET HEAD SCREW 1/2"-13 X 1"

6 4 37115-0209 37115-0209 CORNER POST WELDMENT

7 4 22450-0028 22450-0028 6" LEG WITH ADJUSTABLE 3/4" STUD

8 2 35122-0049 35122-0049 TIE PLATE ATTACHMENT STRIP (IN-

CLUDED WITH INSTALLATION KIT)

9 1 35000-1236* -- COVER PLATE, INSULATION

10 A/R 21292-0001 -- SCREW, HEX WSHR HD #10-16 X 3/4"

* NOTE: The insulation cover plate is only used for PS360-U ovens.

PS300 series

Europe

PS300 series

Europe

WARNING

Improper installation, adjustment, alteration, service or maintenance

can cause property damage, injury or death. Read the installation,

operating and maintenance instructions thoroughly before

installing or servicing this equipment.

NOTICE

During the warranty period, ALL parts replacement and servicing should be performed by

your Middleby Marshall Authorized Service Agent. Service that is performed by parties

other than your Middleby Marshall Authorized Service Agent may void your warranty.

NOTICE

Using any parts other than genuine Middleby Marshall factory manufactured parts relieves

the manufacturer of all warranty and liability.

NOTICE

Middleby Marshall reserves the right to change specifications at any time.

Middleby Cooking Systems Group  1400 Toastmaster Drive  Elgin, IL 60120  USA  [phone]  FAX [phone]

24-Hour Service Hotline: [phone]

www .middleby.com

26