How it Works
Middle Atlantic Products
Loading...
UQFP-4
Specifications
2 pgs493.16 Kb0

Middle Atlantic Products UQFP-2D, UQFP-4D, UQFP-2, UQFP-4DRA, UQFP-4 Specifications

...
• Quiet operation, 27dB at full speed for 4 fan models, 24dB at full speed for 2 fan models
• Overtemp and fan failure notification
• 100 CFM in 4 fan units, 50 CFM in 2 fan units
• Available with commercial and designer inspired aesthetic treatments
• Fan speeds proportional to temperature of enclosure to extend fan life, reduce dust and maintenance
• Temperature probe with 9’ cord and wire ties included
The UQFP Series Ultra Quiet Fan Panel provides smart cooling and monitoring where fan noise is not an option
Model #s UQFP-22, UQFP-44 EIA compliant 19" Ultra Quiet Fan Panel shall be Middle Atlantic Products model # UQFP-__(2,4). Panel shall be constructed of 16-gauge steel, finished in a durable black powdercoat and shall occupy 2 rackspaces. Fans shall activate at 80°F (27°C), reach full speed at 90°F (32°C) and switch off at 77°F (25°C). Fans shall displace __CFM (50,100) with a maximum decibel level of __ (24,27) dB (measurements made 1 meter from source, centered horizontally and vertically). Panel shall provide local status notification of power (green LED), fan speed (yellow LED) and overtemp (red LED). Fan LED light shall blink relative to fan speed. Rear, normally open dry switch closure shall provide overtemp alarm signal to compatible, customer supplied monitoring device. Fan panel shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a period of 3 years. Panel shall include a UL Listed 12V DC power supply and temperature probe with a 9' cord. Model #s UQFP-44DRA, UQFP-44DRC (Designer Inspired) Designer Inspired Ultra Quiet Fan Panel with smoked lens front display shall be Middle Atlantic Products model # UQFP-4DRX (X = finish, refer to chart). Overtemp alarm set point shall be user definable from 95°-115°F (35°-46°C). Overtemp alarm output shall be normally open dry contact closure for use with customer supplied monitoring system. Fans shall activate at 80°F (27°C) and operate at speeds proportional to temperature inside enclosure. Fans shall displace 100 CFM with a maximum decibel level of 27dB (measurements made 1 meter from source, centered horizontally and vertically). Fan panel shall occupy two rackspaces. Chassis shall be constructed of 20-gauge steel with 16-gauge aluminum face. Fan panel shall provide local sensor fault notification. Fan panel shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a period of 3 years. Panel shall include a UL Listed 12V DC power supply and temperature probe with a 9' cord.
Model #s UQFP-22
D, UQFP-44D (with display) EIA compliant 19" Ultra Quiet Fan Panel with local notification display shall be Middle Atlantic Products model # UQFP-__(2,4)D. Panel shall be constructed of 16-gauge steel, finished in a durable black powdercoat and shall occupy 2 rackspaces. Fans shall activate at 80°F (27°C), reach full speed at 90°F (32°C) and switch off at 77°F (25°C). Fans shall displace __CFM (50,100) with a maximum decibel level of __ (24,27) dB (measurements made 1 meter from source, centered horizontally and vertically). Panel shall provide local status notification of power (green LED), fan speed (yellow LED) and overtemp (red LED). Fan LED light shall blink relative to fan speed. Rear, normally open dry switch closure shall provide overtemp alarm signal to compatible, customer supplied monitoring device. Overtemp alarm set point shall be user definable from 95°-115°F (35°-46°C). Front display shall provide notification of overtemp and fan fault conditions. Rear, normally open dry switch closure shall provide fan fault alarm signal to compatible, customer supplied monitoring device. Alarm set point button shall control Fahrenheit/ Celsius setting and overtemp alarm threshold in 1-degree increments. Fan panel shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a period of 3 years. Panel shall include a UL Listed 12V DC power supply and temperature probe with a 9' cord.
96-01037 / rev 1 / 10-19-05
96-01037 / rev 1 / 10-19-05 / UQFP Series
UQFP-4D
Features
Architects’ and Engineers’ Specifications
UQFP Series
Ultra Quiet Fan Panels
Engineered Mounting Solutions
electronic version available at middleatlantic.com
middleatlantic.com
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Middle Atlantic Products, Inc.
EIA
Compliant
UQFP-4DRA
UQFP-4
UQFP-4DRC
OVER TEMP ALARM (N.O.)
12VDC
1A
FAN FAULT ALARM (N.O.)
CONTROL SETTINGS
Press once to view the current overtemp alarm setting.
Each additional push will raise the overtemp alarm setting
by 1
O
.
To toggle between Fahrenheit and Celsius, press and hold for
3 seconds.
PUSH
Temperature Probe
Probe Linearization Processor
A/D Converter
Alarm
Set Input
SPI
Interface
Microcontroller
Fan Fault Input
Pulse Width Modulation
Alarm Output
Alarm Set Interface
Temperature Display
Fan Drive Processor
Fan
Rotation Sensor
Fan Fault Processor
Dry Contact Outputs
Fan Fault Alarm Output
Overtemp Alarm Output
UQFP Series basic dimensions
Middle Atlantic Products, Inc.
3.33 [85]
19.00 [483]
3.49 [89]
2 rack spaces
power LED (green)
fan LED (yellow)
over temp LED (red)
Display (UQFP-2D, UQFP-4D)
fan
fault alarm output overtemp alarm output 12 VDC input jack
9’ temperature
alarm set point button (UQFP-2D, UQFP-4D)
2.74
.21 [5]
.46 [12]
SIDE VIEW
REAR VIEW
FRONT VIEW
TOP VIEW
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Part #
# of Fans
Overtemp Notification
User Definable Overtemp
Setting
Fan Failure
Notification
Local & Remote
Display
Current Draw
at 12 Volts DC
AirflowdBlevel at
Finish
Local LED Local Display Remote
UQFP-2D 2
iiii i
310 mA
50 CFM 24 dB
Black Powdercoat
UQFP-4D 4
iiii i
560 mA
100 CFM 27 dB
i
UQFP-2 2
iiii i
270 mA
50 CFM 24 dB
i
4
iiii i
i
UQFP-4D shown
All dimensions in
inches
[Bracketed dimen-
TOP
2.89 [73]
3.49 [89]
2 RACK SPACES
9’ TEMPERATURE PROBE
OVER TEMP ALARM (N.O.)
12VDC
1A
FAN FAULT ALARM (N.O.)
CONTROL SETTINGS
Press once to view the current
overtemp alarm setting.
Each additional push will raise
the overtemp alarm setting
by 1
O
.
To toggle between Fahrenheit and Celsius, press and hold for
3 seconds.
PUSH
Temperature
Probe
Probe Linearization Processor
A/D
Converter
Alarm
Set Input
SPI
Interface
Microcontroller
Fan Fault
Input
Pulse Width Modulation
Alarm
Output
Alarm Set Interface
Temperature
Display
Fan Drive Processor
Fan
Rotation
Sensor
Fan Fault Processor
Dry Contact Outputs
Fan Fault
Alarm Output
Overtemp Alarm Output
UQFP Series basic dimensions
Middle Atlantic Products, Inc.
3.12 [79]
3.33 [85]
power LED (green)
fan LED (yellow)
over temp LED (red)
display (UQFP-2D, UQFP-4D)
overtemp alarm output 12 VDC input jack
2.74 [70]
.21 [5]
.46 [12]
SIDE VIEW
REAR VIEW
FRONT VIEW
TOP VIEW
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Part #
# of Fans
Overtemp Notification
User Definable Overtemp
Setting
Fan Failure
Notification
Local & Remote
Display
Sensor Fault
Notification
Local
Current Draw
at 12 Volts DC
Airflow
at Full Speed
dB
level at
Full
Speed
Finish
Local LED Local Display Remote
UQFP-2D 2
iiii i
310 mA
50 CFM 24 dB
Black Powdercoat
UQFP-4D 4
iiii i
560 mA
100 CFM 27 dB
Black Powdercoat
UQFP-2 2
ii
270 mA
50 CFM 24 dB
Black Powdercoat
UQFP-4 4
ii
510 mA
100 CFM 27 dB
Black Powdercoat
UQFP-4DRA
4
i i i i i
560 mA 100 CFM 27 dB Black brushed anodized
UQFP-4DRC
4
i i i i i
560 mA 100 CFM 27 dB Silver brushed anodized
UQFP-4D
All dimensions in inches
[Bracketed dimensions in
millimeters]
SIDE VIEW
TOP VIEW
FRONT VIEW
REAR VIEW
2.89 [73]
3.33 [85]
19.00 [483]
3.49 [89]
2 rackspace
9’ temperature probe
alarm set point button (UQFP-2D, UQFP-4D)
fan fault alarm output (UQFP-2D, UQFP-4D)
overtemp alarm output 12 VDC input jack
19.00 [483]
3.49 [89]
2 rackspaces
9’ temperature probe
2.70 [69]
.46 [12]
fan fault alarm output
UQFP-4DRx
alarm set point button
display
Temperature
Probe
Probe Linearization Processor
Fan Fault
Processor
Rotation
Sensor
Alarm Set
Temperature
Interface
Display
Alarm
A/D
SPI
Set Input
Converter
Interface
Microcontroller
Alarm
Pulse Width
Fan Fault
Output
Modulation
Input
Fan Drive Processor
Fan Fault
Alarm Output
Fan
Alarm Set
Temperature
Temperature
Interface
Probe
Display
Probe
Alarm
A/D
SPI
Linearization
Set Input
Converter
Interface
Processor
Microcontroller
Alarm
Pulse Width
Fan Fault
Fan Fault
Dry Contact
Output
Modulation
Input
Processor
Outputs
Fan Drive Processor
Fan Fault
Alarm Output
Rotation
Fan
Sensor
Overtemp Alarm Output
Dry Contact
Outputs
Overtemp
Alarm Output
FAN
FAULT ALARM (N.O.)
OVER TEMP
ALARM
(N.O.)
12VDC
1A
CONTROL SETTINGS
PUSH
Press once to view the current
overtemp alarm setting.
Each additional push will raise the overtemp alarm setting
O
by 1
.
To toggle between Fahrenheit and Celsius, press and hold for
3 seconds.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use