Middle Atlantic SPN-R4-3830 Users Guide

Page 1
Instruction Sheet
SPN-R4-XXXX
Four Post Open Frame Rack Side Panels
THANK YOU Thank you for purchasing the Four Post Open Frame Rack Side Panels. Please read these
instructions thoroughly before installing/assembling this product.
PRODUCT FEATURES
- Locks in place for increased security
I-00228 Rev A
Page 2
NOTE: All parts needed to assemble this product are contained in two boxes.
TOOLS REQUIRED: #2 Phillips Head Screwdriver
PARTS
LOCK BODY QTY
SIDE PANEL QTY
2 A
PIN QTY
8
WASHER QTY
8
PART #
PART #
B
PART #
C
KEY QTY
LOCK CLIP QTY
LOCK CAM QTY
LOCK SCREW QTY
ASSEMBLY
1) Install Washer (C) then install Pin (B) as shown. Hand tighten pin.
2) Repeat for remaining Side Panel.
PART #
1 D
PART #
2 E
PART #
1 F
PART #
1 G
PART #
1 H
B
C
A
(FIGURE A)
Page 2
Page 3
LOCK INSTALLATION (OPTIONAL)
NOTE: Determine top position of upper Side Panel prior to lock installation. Install lock into top knockout
of upper Side Panel. This prevents both panels from being removed.
1) Knock out hole on Side Panel.
3) Attach Lock Clip (F) to Lock Body on inside of Side Panel as shown. Tap into place to secure.
2) Insert Lock Body (D) and remove Key (E) in vertical position.
D
INSIDE OF
SIDE PANEL
E
4) Attach Cam (G) to lock body using Lock Screw (H). Tighten screw. (This is the locked position, unlock to install Side Panel)
G
H
F
Page 3
Page 4
INSTALLATION
NOTE: Install bottom Side Panel first.
1) Align Side Panel Pins with tear-drop holes on side of rack.
2) Lightly push down on top of Side Panel until properly seated.
WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the Four Post Open Frame Rack Side Panels to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters Corporate Voice 973-839-1011 - Fax 973-839-1976 / International Voice +1 973-839-8821 - Fax +1 973-839-4982 middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada Voice 613-836-2501 - Fax 613-836-2690 / middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Page 4
30% Recycled Paper
Loading...